1.
S. Ribeiro e Silva, R.P.F. Gomes, B.S. Lopes,
A.A.D. Carrelhas, L.M.C. Gato, J.C.C. Henriques, J.M. Gordo, A.F.O. Falcão (2021).
Model testing of a floating wave
energy converter with an internal U-shaped oscillating water column, Energy Conversion and Management, 240, 114211, doi:10.1016/j.enconman.2021.114211.
2.
Gordo
J.M. (2020). Effect of Residual Stresses on the Elastoplastic
Behavior of Welded Steel Plates. Journal
of Marine Science and Engineering. 8(9):702. doi: 10.3390/jmse8090702
3.
Gordo,
J.M. (2018). Dependence
of Ultimate Bending Moment of Box Girders on Panel’s Slenderness, International Journal of Engineering
Innovation & Research, 7 (4): 216-219.
4.
Oliveira, A., Gordo, J.M. (2018). Lean Tools
Applied to a Shipbuilding Panel Line of Assembling Process, Brodogradnja/Shipbuilding, 69 (4):
53-64, doi: 10.21278/brod69404.
5.
Leal, M., Gordo, J.M. (2017). Hull’s
Manufacturing Cost Structure. Brodogradnja/Shipbuilding,
68(3):1-24. doi:10.21278/brod68301
6.
Gordo,
J.M., ‘Effect of initial imperfections on the strength of restrained plates’, Journal of Offshore Mechanics and Arctic
Engineering, 2015, 137 (5) doi: 10.1115/1.4030927.
7.
Gordo,
J.M. e Guedes Soares, C., ‘Experimental Evaluation of the Ultimate Bending
Moment of a Slender Thin-Walled Box Girder’, Journal of Offshore Mechanics and Arctic Engineering, 2015, 137 (2): 021604. doi: 10.1115/1.4029536.
8.
Gordo,
J.M. e Guedes Soares, C., ‘Experimental analysis of the effect of frame spacing variation on the ultimate bending moment of box
girders’, Marine Structures, 2014, 37:111-134, doi:
10.1016/j.marstruc.2014.03.003
9.
Gordo,
J.M. e Guedes Soares, C., ‘Compressive Tests on Long
Continuous Stiffened Panels’, Journal
of Offshore Mechanics and Arctic Engineering, 2012, 134 (2): 021403, doi: 10.1115/1.4004517.
10.
Guedes
Soares, C., Juncher Jensen, J., Incecik, A., Downes, J., Romanoff, J., Gordo,
J.M., Fricke, W., Vredeveldt, A., Jastrzebski, T., Hayman, B., Besnard, N.,
Codda, M., Garbatov, Y. e Teixeira, A.P., ‘European
Research in Marine Structures’. Transactions
of the Society of Naval Architects and Marine Engineers, 2011, 119: 93-136.
11.
Gordo,
J.M. e Guedes Soares, C., ‘Compressive
Tests on Stiffened Panels of Intermediate Slenderness’, Thin Walled Structures, 2011,
doi:10.1016/j.tws.2011.02.004.
12.
Gordo
JM, Guedes Soares C, Tests on ultimate strength of hull box girders made of
high tensile steel, Marine Structures
(2009), 22(4):770-790, doi:10.1016/j.marstruc.2009.07.002 .
13.
Gordo, J.M. e Guedes Soares, C., 2008. Compressive Tests on Short Continuous Panels, Marine Structures, 21 (2-3): 113-326, doi:10.1016/j.marstruc.2007.12.005.
14.
Gordo,
J.M. e Guedes Soares, C. Experimental evaluation of the behavior of a mild
steel box girder under bending moment. Ship
and Offshore Structures. 2008. 3
(4): 347-358, doi: 10.1080/17445300802370479.
15.
Gordo, J.M., Guedes Soares, C. Experimental Evaluation of the
Ultimate Bending Moment of a Box Girder. Mar. Syst. Ocean Technol. 1, 33–46
(2004). doi: 10.1007/BF03449192
16. Guedes Soares, C., Gordo, J. M. e Teixeira, A. M. P. Design equations for plates subjected to heat loads and lateral pressure. Marine Structures. 2000; 13:1-23. doi: 10.1016/S0951-8339(00)00005-8
17.
Guedes Soares, C., Gordo, J. M. e Teixeira, A.
M. P. Elasto-Plastic
Behaviour of Plates Subjected to Heat Loads. Journal of Constructional Steel Research.
1998; 45(2):179-198. doi: 10.1016/S0143-974X(97)00062-X
18.
Gordo, J. M. e Guedes Soares, C. Interaction Equation for the
Collapse of Tankers and Containerships Under Combined Bending Moments. Journal of Ship Research. 1997;
41(3):230-340.
19.
Guedes Soares, C. e Gordo, J. M. Design Methods for Stiffened Plates
Under Predominantly Uniaxial Compression. Marine Structures. 1997;
10(6):465-497,
20.
Gordo, J. M., Guedes Soares, C. e Faulkner, D. Approximate assessment of the
ultimate longitudinal strength of the hull girder. Journal of Ship Research. 1996;
40(1):60-69.
21.
Gordo, J. M. e Guedes Soares, C. Approximate Method to Evaluate the
Hull Girder Collapse Strength. Marine Structures. 1996; 9(1): 449-470. doi: 10.1016/0951-8339(95)00030-5
22.
Guedes Soares, C. e Gordo, J. M. Collapse Strength of Rectangular
Plates under Transverse Compression. Journal of Constructional Steel Research.
1996; 36(3):215-234, doi:10.1016/0143-974X(95)00018-Q.
23.
Guedes Soares, C. e Gordo, J. M. Compressive Strength of Rectangular
Plates Under Biaxial Load and Lateral Pressure. Thin-Walled Structures. 1996;
24:231-259. Doi:10.1016/0263-8231(95)00030-5
24.
Teixeira,
G. and Gordo, J.M. (2021), “A simplified method to simulate residual stresses in
plates”, Developments in Maritime
Technology and Engineering, Taylor & Francis Group, London, UK.
25.
Roque,
P.Z. and Gordo, J.M. (2021), “A measurement of shipbuilding productivity”, Developments
in Maritime Technology and
Engineering, Taylor & Francis Group, London, UK.
26.
Gordo J.M., Leal M (2018). A tool for analysis of costs on the manufacturing of the
hull. Maritime Transportation and
Harvesting of Sea Resources – Guedes Soares & Teixeira (Eds), Taylor
& Francis Group, pp. 743-748.
27.
Oliveira, A., Gordo, J.M. (2018). Cutting processes in shipbuilding - a case study. Maritime Transportation and Harvesting of
Sea Resources – Guedes Soares & Teixeira (Eds), Taylor & Francis
Group, pp. 757-762.
28.
Oliveira, A., Gordo J.M. (2018). Implementation of new production processes in panel's
line. Maritime Transportation and Harvesting
of Sea Resources – Guedes Soares & Teixeira (Eds), Taylor & Francis
Group, pp. 763-773.
29.
Gordo,
J.M. (2017), Compressive strength of double-bottom
under alternate hold loading condition, Progress
in the Analysis and Design of Marine Structures – Guedes Soares &
Garbatov (Eds), Taylor & Francis Group, London, ISBN 978-1-138-06907-7
30.
Gordo,
J.M. and Guedes Soares, C. (2015), “Experimental analysis of a box girder with double span
subject to pure bending moment”, Maritime
Technology and Engineering, Guedes Soares, C. & Santos T.A. (Eds.),
Taylor & Francis Group, London, UK, pp. 399-405.
31.
T.Yoshikawa,
A. Bayatfar, B. J. Kim, C. P. Chen, D. Wang, J. Boulares, J. M. Gordo, L.
Josefson, M. Smith, P. Kaeding, P. Jensen, R. Ojeda, S. Benson, S. Vhanmane, S.
Zhang, X. Jiang, "Committee III.1 -
Ultimate Strength", Proceedings
of the 19th International Ship and Offshore Structures Congress (ISSC),
September, 2015, Guedes Soares e Garbatov (Eds.), Portugal, 2015, Vol. 1, pp. 279-349.
32.
Gordo,
J.M. and Guedes Soares, C. (2015), “Experimental analysis of a box girder with double
span subject to pure bending moment”,
Maritime Technology and
Engineering, Guedes Soares, C. & Santos T.A. (Eds.), Taylor & Francis Group, London, UK, pp.
399-405.
33.
Gordo, J. M., ‘Residual
stresses relaxation of welded structures under alternate loading’, Developments in Maritime Transportation and
Exploitation of Sea Resources, Taylor & Francis, Guedes Soares and
López Peña (eds.). 2013.
34.
Gordo,
J.M. e Guedes Soares, C., ‘Experiments
on three mild steel box girders of different spans under pure bending moment’,
Advances in Marine Structures, Espoo,
2013.
35. Gordo, J.M., ‘Resistência à Compressão do Duplo Fundo sob a Acção de Carregamento em Porões Alternados’, Engenharia e Tecnologia Marítima, Guedes Soares e N. A. Santos (Eds.), Salamandra, Lisboa, 2012, (ISBN 978-972-689-248-9), pp. 149-160.
36. Lourenço, R. e Gordo, J.M., ‘Método Automático de Planificação de Chapas Adaptado ao Processo de Enformação Térmica’, Engenharia e Tecnologia Marítima, Guedes Soares e N. A. Santos (Eds.), Salamandra, Lisboa, 2012, (ISBN 978-972-689-248-9), pp. 161-170.
37.
Gordo, J.M., Teixeira, A.P., Guedes Soares, C., 2011, Ultimate
strength of ship structures, Marine Technology and Engineering, Volume 2,
2011, Pages 889-900.
38.
Gordo, J.M. e Guedes Soares, C. Experimental evaluation of the behavior of a
mild steel box girder under bending moment. Int. Conference on ‘Advancements in Marine Structures’. 2007.
39. Carvalho, I., Gordo, J.M., Lima, J.L. e Guedes Soares, C., “Modelação de custos de corte e soldadura de aço em reparação naval”, Inovação e Desenvolvimento nas Actividades Marítimas, Edições Salamandra, Lisboa, 2006, pp. 905-917.
40. Gordo, J.M., Carvalho, I. e Guedes Soares, C. “Potencialidades de processos tecnológicos avançados de corte e união de aço em reparação naval”, Inovação e Desenvolvimento nas Actividades Marítimas, Edições Salamandra, Lisboa, 2006, pp.877-890.
41. Dimas, D., Gordo, J.M. e Guedes Soares, C., ‘Levantamento de deformações em painéis reforçados por fotografia digital’, Inovação e Desenvolvimento nas Actividades Marítimas, Edições Salamandra, Lisboa, 2006, pp.765-780.
42. Roque, P. & Gordo, J.M., (2021) ‘Produtividade em Construção Naval’, Revista da Marinha, nº 1022, pp- 60-62.
43. Ensaio de Flexão em Estruturas de Paredes Finas Reforçadas - Gordo, J. M. & Guedes Soares, C. "Ensaio de flexão em estrutura de paredes finas reforçadas". Mecânica Experimental; Revista da APAET. 2002, (8), 55-65. (Original)
44.
R. Machado, José Manuel Gordo, M. Ventura (2022).
Geometrical
characterization of ship structural design, In book: Trends in Maritime
Technology and Engineering Volume 1, Guedes Soares & Santos (Eds.), Taylor
& Francis Group, London, doi: 10.1201/9781003320272-19
45.
Oliveira, A., Gordo, J.M. (2018). Model to Forecast Times and Costs of Cutting,
Assembling and Welding Stages of Construction of Ship Blocks, Progress in Maritime Engineering and
Technology, Guedes Soares & Santos (Eds.), Taylor & Francis Group,
London, ISBN 978-1-138-58539-3.
46.
Gordo,
J.M. and Guedes Soares, C. (2018), “Pure bending test on a box girder with low
panel's slenderness”, Proceedings of
the ASME 37th International Conference on Ocean, Offshore and Arctic
Engineering (OMAE 2018), 17-22 June, Madrid.
47.
Gordo,
J.M. and Guedes Soares, C., ‘Ultimate bending
moment of a double span box girder with narrow stiffener’ spacing’, IMAM
2015, Pula, 2015, 355-363.
48.
Gordo,
J.M. and Guedes Soares, C., ‘Degradation of
long plate’s ultimate strength due to variation on the shape of initial
imperfections’, IMAM 2015, Pula, 2015, 345-354.
49.
Committee V.3: Materials and Fabrication
Technology, 18th International Ship
and Offshore Structures Congress (ISSC 2012), 2014: (3) 231-246.
50.
Gordo,
J.M. e Guedes Soares, C., ‘Experimental Evaluation
of the Ultimate Bending Moment of a Thin Box Girder’, OMAE2014, San Francisco, USA, 2014,
paper 24645
51.
Committee V.3:
Materials and Fabrication Technology, 18th
International Ship and Offshore Structures Congress, 2012: (2) 113-152.
52.
C.
Guedes Soares, J. Juncher Jensen, A. Incecik, J. Downes, J. Romanoff, J. M.
Gordo, W. Fricke, T. Jastrzebski, B. Hayman, N. Besnard, M. Codda, Y. Garbatov,
A.P. Teixeira, European Research in Marine
Structures, SNAME Annual Meeting 2011, 2011.
53. Gordo, J.M., ‘Flexão transversal de painéis reforçados induzida por esforço longitudinal compressivo’, CMNE 2011, Coimbra, 2011.
54.
Gordo, J.M., ‘Effect of initial
imperfections on the strength of restrained plates’, OMAE2011, Rotterdam, The Netherlands, 2011, paper 49161. doi: 10.1115/OMAE2011-49161.
55.
Paik, J. K., Branner, K., Choo, Y. S., Czujko, J., Fujikubo, M., Gordo,
J. M., Parmentier, G., Laccarino, R., O´Neil, S., Pasqualino, I., Wang, D.,
Wang, X. and Zhang, S. , "Committee
III.1 - Ultimate Strength", Proceedings
of the 17th International Ship and Offshore Structures Congress (ISSC),
16-21 August, 2009, Jang, C. D. and Hong, S. Y. (Eds.), Seoul National
University, 2009, Vol. 1, pp.
375-474.
56. Gordo, J.M., ‘Resolução do método tradicional de traçagem utilizando o Autocad’, NAVAL 2009, Encontro de Engenharia Naval, Ordem dos Engenheiros, Lisboa, 2009.
57. Gordo, J.M., Resistência de placas imperfeitas sob compressão axial, 22º Congresso SOBENA 2008, Rio de Janeiro, Brasil, 2008. DOI: 10.13140/2.1.3596.8961
58. Gordo, J.M. e Guedes Soares, C., Compressive Tests on Continuos Long Stiffened Panels, Proceedings OMAE2008, Portugal, 2008, paper 57873.
59. Gordo, J.M., Resistência Limite de Elementos de Placa Sujeitas a Compressão Longitudinal, XXVIII CILAMCE - Congresso Ibero Latino-Americano sobre Métodos Computacionais em Engenharia, 2007, paper 881. doi: 10.13140/RG.2.1.1848.2086
60.
T Yao, E Brunner, S R Cho, Y S Choo, J Czujko, S
F Estefen, J M Gordo, P E Hess, H Naar, Y Pu, P Rigo, Z Q Wan, "Ultimate
Strength (Committee III.1)". 16th International Ship and Offshore Structures Congress, Southampton,
UK, 2006: (1) 369-458.
61.
Gordo,
J. M. e Guedes Soares, C., “Compressive Tests on Stocky Panels
with Different Configurations”, Proceedings of ISOPE 2005, Seul, Coreia do Sul, 2005: 759-765
62.
Esteves, R. e Gordo, J. M.. ‘Vibrations analysis on the
Self-Service of a Passengers’ Vessel’. 12th Internacional Conference on Sound
and Vibrations; Lisboa. 2005.
63. Esteves, R. e Gordo, J. M.. ‘A Classe Comfort segundo as Sociedades Classificadoras’. IX Jornadas Técnicas de Engenharia Naval; Guedes Soares e Gonçalves de Brito (editores), Lisboa. 2004.
64. Esteves, R. e Gordo, J. M.. ‘Análise de Vibrações no Self-Service de um Navio de Passageiros’. IX Jornadas Técnicas de Engenharia Naval; Guedes Soares e Gonçalves de Brito (editores), Lisboa. 2004.
65. B. Ferreira, J. Gordo, C. Guedes Soares, “Resistência ao colapso de membros tubulares não reforçados”, Métodos Computacionais em Engenharia - APMTAC, Maio de 2004, Lisboa.
66. Gordo, J. M. e Guedes Soares, C., “Influência da geometria e do material na resistência última de placas reforçadas”, IV Encontro Construção Metálica e Mista, Lisboa, 2003. 429-439. doi: 10.13140/RG.2.1.2372.4964
67. Gordo, J. M. e Guedes Soares, C. ‘Efeito das imperfeições geométricas iniciais na resistência de placas’. VIII Jornadas Técnicas de Engenharia Naval; Guedes Soares e Beirão Reis (editores), Viana do Castelo. 2002. 385-404. (ISI: 0/0; SCOPUS: 2/2)
68. Gordo, J. M. e Guedes Soares, C.. "Distribuição de tensões em vigas em caixão de paredes finas reforçadas sujeitas a flexão pura". III Encontro de Construção Metálica Mista; Aveiro. 2001. 679-692.
69. Gordo, J. M. e Guedes Soares, C.: Ensaio de Flexão em Estruturas de Paredes Finas Reforçadas, III Encontro de Construção Metálica Mista; Aveiro. 2001. 55-65.
70. Gordo, J. M. e Guedes Soares, C.. "Efeito da Geometria e Tensões Residuais na Resistência de Painéis Reforçados a Compressão". VII Jornadas Técnicas de Engenharia Naval; Lisboa. 2000. doi: 10.13140/RG.2.1.2983.8485
71.
Gordo,
J. M. e Guedes Soares, C. "Residual Strength of Damaged Ship
Hulls ". Proceedings of Ninth IMAM Conference;
Napoli, Italy. 2000: 79-86.
72.
Kaminski, M. L.; Amdahl, J.; Fasano, E.; Frieze,
P. A.; Gordo, J. M.; Grundy, P.; Hess, P. E.; Kawamoto, Y.; Kujala, P.; Paik,
J. K.; Cho, S.-R.; Rohr, U., e Simonsen, B. C.. "Ultimate Strength (Committee III.1)". editado por 14th
International Ship and Offshore Structures Congress (ISSC)
73. Gordo, J. M. e Guedes Soares, C.. "Considerações sobre a resistência de estruturas de paredes finas". editado por: F. David e Silva and A. Rodrigues Mateus. Projecto, Construção e Manutenção de Navios - Actas do Seminário; Lisboa. 1998. 7.1-7.17.
74.
Jensen, J. J.; Caridis, P. A.; Cho, S.-R.; Dow,
R.; Gordo, J. M.; Pegg, N. G.; Rohr, U.; Rutherford, S. E.; Zhang, S.; Damonte,
R.; Kaminski, M. L.; Kozliakov, V. V., e T. Yao. "Ultimate Strength (Committee
III.1)". editado por 13th International Ship and Offshore Structures
Congress (ISSC)
75. Gordo, J.M. e Guedes Soares, C.. "Resistência ao colapso de secções danificadas de navios". editado por: C. Guedes Soares, A. Mira Monerris. Segurança, Qualidade e Meio Ambiente nas Indústrias Marítimas; Lisboa. Lisboa; 1997, pp. 27.1-27.13
76. Ventura, M. F.; Gordo, J. M., e Guedes Soares, C.. "Projecto estrutural de navios assistido por computador". editado por: Carlos Guedes Soares. 6ª Jornadas Técnicas de Engenharia Naval; 1995: 13.1-13.14. pp. 14 (A Engenharia Naval em Portugal).
77.
Gordo, J. M. e Guedes Soares, C.. "Collapse
of ship hulls under combined vertical and horizontal bending moments".
editado por 6th International Symposium on Practical Design of Ships and
Mobile Units (PRADS'95);
78.
Gordo, J. M. e Guedes Soares, C.. "Approximate load shortening curves
for stiffened plates under uniaxial compression". editado por D. Faulkner, M. J. Cowling
A. Incecik and P. K. Das. Integrity of Offshore Structures - 5; Glasgow.
Warley, U.K.: EMAS; 1993: 189-211. DOI: 10.13140/RG.2.1.3643.2801
79. Gordo, J. M. Resistência Última de Estruturas de Navios sob Flexão. Lisboa: Instituto Superior Técnico; 2002. 450 pgs. DOI: 10.13140/2.1.3401.0883
80.
Gordo,
J. M. Longitudinal Strength of
Ships: a simplified approach. [Tese de Mestrado].
|
|
|
ISI |
Google |
SCOPUS |
||
|
|
|
All |
ExA |
All |
All |
ExA |
|
1 |
Gordo, J. M.,
Guedes Soares, C. e Faulkner, D. Approximate
assessment of the ultimate longitudinal strength of the hull girder. Journal
of Ship Research. 1996; 40(1):60-69 |
70 |
|
121 |
108 |
|
|
2 |
Gordo, J. M. e
Guedes Soares, C.. "Approximate
load shortening curves for stiffened plates under uniaxial compression".
editado por D. Faulkner, M. J. Cowling A. Incecik and P. K. Das. Integrity
of Offshore Structures - 5; Glasgow. Warley, U.K.: EMAS; 1993:
189-211. DOI: 10.13140/RG.2.1.3643.2801 |
21 |
10 |
71 |
65 |
36 |
|
3 |
Gordo, J. M. e
Guedes Soares, C. Approximate
Method to Evaluate the Hull Girder Collapse Strength. Marine
Structures. 1996; 9(1): 449-470. |
|
|
72 |
64 |
32 |
|
4 |
Guedes Soares, C.
e Gordo, J. M. Compressive
Strength of Rectangular Plates Under Biaxial Load and Lateral Pressure. Thin-Walled
Structures. 1996; 24:231-259. |
17 |
13 |
49 |
41 |
21 |
|
5 |
Gordo, J. M. e
Guedes Soares, C. Interaction
Equation for the Collapse of Tankers and Containerships Under Combined
Bending Moments. Journal of Ship Research. 1997;
41(3):230-340. |
18 |
15 |
43 |
39 |
27 |
|
6 |
Guedes Soares, C.
e Gordo, J. M. Design
Methods for Stiffened Plates Under Predominantly Uniaxial Compression. Marine
Structures. 1997; 10(6):465-497, |
|
|
47 |
37 |
15 |
|
7 |
Gordo, J.M. e
Guedes Soares, C., 2008. Compressive
Tests on Short Continuous Panels, Marine
Structures, 21 (2-3): 113-326,
doi:10.1016/j.marstruc.2007.12.005. |
17 |
10 |
27 |
26 |
20 |
|
8 |
Gordo JM, Guedes Soares C, Tests on ultimate
strength of hull box girders made of high tensile steel, Marine Structures (2009),
doi:10.1016/j.marstruc.2009.07.002 |
11 |
7 |
33 |
26 |
12 |
|
9 |
Gordo, J. M. e Guedes Soares, C. "Residual
Strength of Damaged Ship Hulls ". Proceedings of Ninth IMAM Conference, pp. 79-86.; Napoli,
Italy. 2000: 79-86. |
|
|
27 |
14 |
|
|
10 |
Gordo, J. M. e
Guedes Soares, C. Experimental
Evaluation of the Ultimate Bending Moment of a Box Girder, Marine Systems & Ocean Technology,
2004, 1 (1): 33-46. |
|
|
30 |
14 |
|
|
11 |
Gordo, J. M. e
Guedes Soares, C.. "Collapse
of ship hulls under combined vertical and horizontal bending moments".
6th International Symposium on Practical Design of Ships and Mobile Units
(PRADS'95); Korea. 1995: 2.808-2.819. |
|
|
12 |
11 |
|
|
12 |
Paik, J. K., Branner, K., Choo, Y. S., Czujko,
J., Fujikubo, M., Gordo, J. M., Parmentier, G., Laccarino, R., O´Neil, S.,
Pasqualino, I., Wang, D., Wang, X. and Zhang, S. , "Committee III.1 - Ultimate
Strength", Proceedings of the 17th International Ship and Offshore
Structures Congress (ISSC), 16-21 August, 2009, Jang, C. D. and Hong, S. Y.
(Eds.), Seoul National University, 2009,
Vol. 1, pp. 375-474. |
|
|
16 |
15 |
11 |
|
13 |
Gordo, J.M. e Guedes Soares, C. Experimental
evaluation of the behavior of a mild steel box girder under bending moment. Ship and Offshore Structures. 2008. 3 (4): 347-358, doi: 10.1080/17445300802370479 |
|
|
30 |
14 |
5 |
|
14 |
Guedes Soares, C.
e Gordo, J. M. Collapse
Strength of Rectangular Plates under Transverse Compression. Journal
of Constructional Steel Research. 1996 ; 36(3):215-234, doi:10.1016/0143-974X(95)00018-Q |
3 |
3 |
12 |
13 |
7 |
|
15 |
Gordo, J.M. e
Guedes Soares, C. Experimental
evaluation of the behavior of a mild steel box girder under bending moment.
Int. Conference on ‘Advancements in
Marine Structures’. 2007 |
9 |
6 |
|
13 |
1 |
|
16 |
Gordo, J.M. e Guedes Soares, C., ‘Compressive Tests on Stiffened Panels of
Intermediate Slenderness’, Thin Walled
Structures, 2011, doi:10.1016/j.tws.2011.02.004. |
9 |
6 |
15 |
12 |
11 |
|
17 |
Guedes Soares,
C., Gordo, J. M. e Teixeira, A. M. P. Elasto-Plastic Behaviour of Plates Subjected to Heat Loads.
Journal of Constructional Steel Research. 1998; 45(2):179-198 |
|
|
|
10 |
7 |
|
18 |
Gordo, J.M. e Guedes Soares, C., ‘Compressive
Tests on Long Continuous Stiffened Panels’, Journal of Offshore Mechanics and Arctic Engineering, 2012, 134 (2): 021403, doi: 10.1115/1.4004517. |
2 |
1 |
9 |
8 |
5 |