Articles in Journals
 • Abbasnia, A. and Guedes Soares, C. (2018), “Transient fully nonlinear ship waves using a three-dimensional NURBS numerical towing tank”, Journal of Engineering Analysis With Boundary Elements, Vol. 91, pp. 44-49

 • Abbasnia, A. and Guedes Soares, C. (2018), “Fully nonlinear simulation of wave interaction with a cylindrical wave energy converter in a numerical wave tank”, Ocean Engineering, Vol. 152, pp. 210-222

 • Abbasnia, A. and Guedes Soares, C. (2018), “Fully nonlinear propagation of waves in an uniform current using NURBS numerical wave tank”, Ocean Engineering, Vol. 163, pp. 115-125

 • Bento, A.R., Martinho, P. and Guedes Soares, C. (2018), “Wave energy assessement for Northern Spain from a 33-year hindcast”, Renewable Energy, Vol. 127, pp. 322-333

 • Bento, A.R.,Salvação, N. and Guedes Soares, C. (2018), “Validation of an operational wave forecast system for Galway Bay”, Journal of Operational Oceanography, Vol. 11(2), pp. 112–124

 • Bettencourt, J. and Dias, F. (2018), “Wall pressure and vorticity in the intermittently turbulent regime of the Stokes boundary layer”, Journal of Fluid Mechanics, Vol. 851, pp. 479-506

 • Campos, R. and Guedes Soares, C. (2018), “Spatial distribution of offshore wind statistics on the coast of Portugal using Regional Frequency Analysis”, Renewable Energy, Vol. 123, pp. 806-816

 • Campos, R., Alves, J.H.G.M., Guedes Soares, C., Guimaraes, L.G. and Parente, C.E. (2018), “Extreme wind-wave modeling and analysis in the south Atlantic ocean”, Ocean Modelling, Vol. 124, pp. 75-93

 • Castro-Santos, L., Silva, D., Bento, A.R., Salvação, N. and Guedes Soares, C. (2018), “Economic feasibility of wave energy farms in Portugal”, Energies, Vol. 11, pp. 31-49

 • Chen, B.Q. and Guedes Soares, C. (2018), “A simplified model for the effect of weld induced residual stresses on the axial ultimate strength of stiffened plates”, Journal of Marine Science and Application, Vol. 17, pp. 57-67

 • Chen, B.Q., Hashemzadeh, M. and Guedes Soares, C. (2018), “Validation of numerical simulations with X-ray diffraction measurements of residual stress in butt-welded steel plates”, Ships & Offshore Structures, Vol. 13(3), pp. 273-282

 • Chichi, D. and Garbatov, Y. (2018), “Reinforcement of ageing ship structures”, International Journal of Maritime Engineering, Vol. 160(Part A3), pp. A257-A266

 • Chujutalli, J.H., Estefen. S.F. and Guedes Soares, C. (2018), “Experimental and numerical analysis of small-scale panels with indented stiffeners”, Journal of Constructional Steel Research, Vol. 150, pp. 7-22

 • Corak, M., Parunov, J. and Guedes Soares, C. (2018), “Structural reliability analysis of container ships under combined wave and whipping loads”, Journal of Ship Research, Vol. 62(3), pp. 115-133

 • Dong, Y., Garbatov, Y. and Guedes Soares, C. (2018), “Fatigue crack initiation assessment of welded joints accounting for residual stress”, Fatigue & Fracture of Engineering Materials & Structures, Vol. 41, pp. 1823-1837

 • Dong, Y., Garbatov, Y. and Guedes Soares, C. (2018), “A two-phase approach to estimate fatigue crack initiation and propagation lives of notched structural components”, International Journal of Fatigue, Vol. 116, pp. 523-534

 • Dong, Y., Teixeira, A.P. and Guedes Soares, C. (2018), “Time-variant fatigue reliability assessment of welded joints based on the PHI2 and response surface methods”, Reliability Engineering and System Safety, Vo. 177, pp. 120-130

 • Edalat, P., Khedmati, M.R. and Guedes Soares, C. (2013), “Free Vibration and Dynamic Response Analysis of Stiffened Parabolic Shells using the Equivalent Orthotropic Shell Parameters”, Latin American Journal of Solids and Structures, Vol. 10, pp. 747-766

 • Gadelho, J.F.M., Rodrigues, J.M., Lavrov, A. and Guedes Soares, C. (2018), “Heave and sway hydrodynamic coefficients of ship hull sections in deep and shallow water using Navier-Stokes equations”, Ocean Engineering, Vol. 154, pp. 262-276

 • Garbatov, Y., Sisci, F. and Ventura, M. (2018), “Risk-based framework for ship and structural design accounting for maintenance planning”, Ocean Engineering, Vol. 166, pp. 12–25

 • Gaspar, J.F., Calvário, M., Kamarlouei, M. and Guedes Soares, C. (2018), “Design tradeoffs of an oil-hydraulic Power Take-Off for Wave Energy Converters”, Renewable Energy, Vol. 129, pp. 245-259

 • Goncalves, M., Martinho, P. and Guedes Soares, C. (2018), “A 33-year hindcast on wave energy assessment in the western French coast”, Energy, Vol. 165, pp. 790-801

 • Gordo, J.M. (2018), “Dependence of ultimate bending moment of box girders on panel's slenderness” , International Journal of Engineering Innovation & Research, Vol. 7(4), pp. 216-219

 • Guia, J., Teixeira, A.P. and Guedes Soares, C. (2018), “Probabilistic modelling of the hull girder target safety level of tankers”, Marine Structures, Vol. 61, pp. 119-141

 • Hashemzadeh, M., Chen, B.Q. and Guedes Soares, C. (2018), “Evaluation of multi-pass welding induced residual stress using numerical and experimental approaches”, Ships & Offshore Structures, Vol. 13(8), pp. 847-856

 • Islam, H. and Guedes Soares, C. (2018), “Estimation of hydrodynamic derivatives of a container ship using PMM simulation in OpenFOAM”, Ocean Engineering, Vol. 164, pp. 414-425

 • Kabir, S., Yazdi, M., Aizpurua, J.I. and Papadopoulos, Y. (2018), “Uncertainty-Aware Dynamic Reliability Analysis Framework for Complex Systems”, IEEE Access – Multidisciplinary, vOL. 6, PP. 29499-29515

 • Karmakar, D. and Guedes Soares, C. (2018), “Wave motion control over submerged horizontal plates”, Journal of Offshore Mechanics and Arctic Engineering, Vol. 140, pp. 031101-1 - 031101-10

 • Kharghani, N. and Guedes Soares, C. (2018) , “Experimental, numerical and analytical study of bending of rectangular composite laminates”, European Journal of Mechanics A- Solids (EJMAS), Vol. 72, pp. 155-174

 • Kharghani, N. and Guedes Soares, C. (2018), “Experimental and numerical study of hybrid steel-FRP balcony overhang of ships under shear and bending”, Marine Structures, Vol. 60, pp. 15-33

 • Li, C.F., Fu, P., Ren, H.L., Xu, W.J. and Guedes Soares, C. (2018), “Ultimate bearing capacity assessment of hull girder with Asymmetric cross-section”, Journal of Offshore Mechanics and Arctic Engineering, Vol. 140, pp. 061103-1 - 061103-9

 • Li, C.F., Ren, H.L., Zhu, Z.Y. and Guedes Soares, C. (2018), “Numerical investigation on the buckling behaviour of aluminium integrally stiffened panels subjected to uniaxial compressive load”, Thin-Walled Structures, Vol. 127, pp. 221-234

 • Liu, B., Garbatov, Y., Zhu, L. and Guedes Soares, C. (2018), “Numerical assessment of the structural crashworthiness of corroded ship hulls in stranding”, Ocean Engineering, Vol. 170, pp. 276-285

 • Liu, B., Villavicencio, R. and Guedes Soares, C. (2018), “Experimental and numerical analysis of residual stresses and strains induced during cold bending of thick steel plates”, Marine Structures, Vol. 57, pp. 121-132

 • Liu, B., Wu, W.G. and Guedes Soares, C. (2018), “Ultimate strength analysis of a SWATH ship subjected to transverse loads”, Marine Structures, Vol. 57, pp. 105-120

 • Liu. K., Liu, B., Villavicencio, R., Wang, Z. and Guedes Soares, C. (2018), “Assessment of material strain rate effects on square steel plates under lateral dynamic impact loads”, Ships & Offshore Structures, Vol. 13(2), p. 217-225

 • Liu. K., Liu, B., Wang, Z., Wang, G. and Guedes Soares, C. (2018), “An experimental and numerical study on the behaviour of tubular components and T-joints subjected to transverse impact loading”, International Journal of Impact Engineering, Vol. 120, pp.16-30

 • Liu. Ka., Yan, R-J. and Guedes Soares, C. (2018), “An improved model updating technique based on modal data”, Ocean Engineering, Vol. 154, pp. 277-287

 • Liu. Ka., Yan, R-J. and Guedes Soares, C. (2018) , “Optimal sensor placement and assessment for modal identification”, Ocean Engineering, Vol. 165, pp. 209-220

 • Liu. Ka.,Yan, R-J. e Guedes Soares, C. (2018), “Damage identification in offshore jacket structures based on modal flexibility”, Ocean Engineering, Vol. 170, pp. 171-185

 • Mikulic, A., Parunov, J. and Guedes Soares, C. (2018), “Wave-induced vertical motions and bending moments in damaged ships” , Journal Marine Science and Application, Vol. 17, pp. 389-405

 • Mohapatra, S.C., Fonseca, R.B. and Guedes Soares, C. (2018), “Comparison of analytical and numerical simulations of long nonlinear internal solitary waves in shallow water”, Journal of Coastal Research, Vol. 34(4), pp. 928-938

 • Mohapatra, S.C., Sahoo, T. and Guedes Soares, C. (2018), “Surface gravity wave interaction with a submerged horizontal flexible porous plate”, Applied Ocean Research, Vol. 78, pp. 61-74

 • Mohapatra, S.C., Sahoo, T. and Guedes Soares, C. (2018), “Interaction between surface gravity wave and submerged horizontal flexible structures”, Journal of Hydrodynamics, Vol. 30(3), pp. 481-498

 • Moita, P.J., Madeira, J.F.A., Valido, A.J. and Barradas Cardoso, J. (2018), “Optimal multiobjective design of a vehicle restraint system using pre-acting control: A limiting performance analysis”, Multidiscipline Modeling in Materials and Structures, Vol. 14(4), pp. 756-768

 • Oliveira, A. and Gordo, J.M. (2018), “Lean tools applied to a shipbuilding panel line assembling process”, Brodogradnja, Vol. 69(4), pp. 53-64

 • Patel, SD. and Guedes Soares, C. (2018), “Reliability assessment of glass epoxy composite plates due to low velocity impact”, Composite Structures, Vol. 200, pp. 659-668

 • Praveen, K.M., Karmakar, D. and Guedes Soares, C. (2018), “Hydroelastic analysis of articulated floating elastic plate based on Timoshenko-Mindlin plate theory”, Ships & Offshore Structures, Vol. 13, pp. 287-301

 • Raed, K. and Guedes Soares, C. (2018), “Variability effect of the drag and inertia coefficients on the Morison wave force acting on a fixed vertical cylinder in irregular waves”, Ocean Engineering, Vol. 159, pp. 66-75

 • Rajendran, S., Fonseca, N. and Guedes Soares, C. (2018), “Estimation of Short-and-Long Term Probability Distributions of Wave Induced Loads Acting on a Cruise Vessel in Extreme Seas”, Journal of Offshore Mechanics and Arctic Engineering, Vol. 140, pp. 021602-1

 • Rezanejad, K. and Guedes Soares, C. (2018), “Enhancing the primary efficiency of an oscillating water column wave energy converter based on a dual-mass system analogy”, Renewable Energy, Vol. 123, pp. 730-747

 • Ringsberg, J.W., Amdahl, J., Chen, B.Q., Cho, S.R., Ehlers, S., Hu, ZQ., Kõrgesaar, M., Liu, B., Nicklas, K., Parunov, J., Samuelides, M., Guedes Soares, C., Tabri, K., Quinton, B.W., Yamada, Y. and Zhang, SM. (2018), “MARSTRUCT benchmark study on collision simulations”, Marine Structures, Vol. 59, pp. 142-157

 • Rodrigues, J.M., Lavrov, A., Hinostroza, M.A. and Guedes Soares, C. (2018), “Experimental and numerical investigation of the partial flooding of a barge model”, Ocean Engineering, Vol. 169, pp. 586-603

 • Rodrigues, S.R.A., Santos, J.A. and Guedes Soares, C. (2018), “Numerical and experimental study of ship-generated waves”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor & Francis Group, London, UK, pp. 569-578

 • Rodriguez, G., Clarindo, G. and Guedes Soares, C. (2018), “Robust estimation and representation of climatic wave spectrum”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor & Francis Group, London, UK, pp. 705-714

 • Saad-Eldeen, S., Garbatov, Y. and Guedes Soares, C. (2018), “Structural capacity of plates and stiffened panels of different materials with opening”, Ocean Engineering, Vol. 167, pp. 45-54

 • Salvação, N. and Guedes Soares, C. (2018), “Wind resource assessment offshore the Atlantic Iberian coast with the WRF model”, Energy, Vol. 145, pp. 276-287

 • Santos, A.M.P., Salvador, R. and Guedes Soares, C. (2018), “A dynamic view of the socioeconomic significance of ports”, Maritime Economics and Logistics, Vol. 20, pp. 169-189

 • Santos, A.M.P., Salvador, R., Dias, J.C.Q. and Guedes Soares, C. (2018), “Assessment of port economic impacts on regional economy with a case study on the Port of Lisbon”, Maritime Policy and Management, Vol. 45(5), pp. 684-698

 • Santos, F.P., Teixeira, A.P. and Guedes Soares, C. (2018), “Maintenance planning of an offshore wind turbine using stochastic petri nets with predicates”, Journal of Offshore Mechanics and Arctic Engineering, Vol. 140, pp. 021904-1 - 021904-9

 • Shi, X.H., Zhang. J. and Guedes Soares, C. (2018), “Numerical assessment of experiments on the ultimate strength of stiffened panels with pitting corrosion under compression" , Thin-Walled Structures, Vol. 133, pp. 52-70

 • Silva, D., Martinho, P. and Guedes Soares, C. (2018), “Wave energy distribution along the Portuguese continental coast based on a thirty three years hindcast”, Renewable Energy, Vol. 127, pp. 1067-1075

 • Silva, D., Rusu, E. and Guedes Soares, C. (2018) , “The effect of a wave energy farm protecting an aquaculture installation”, Energies, Vol. 11(8), pp. 2109 (1/17)

 • Sutherland, L.S. (2018), “A review of impact testing on marine composite materials: Part IV – Scaling, strain rate and marine-type laminates”, Composite Structures, . Vol. 200, pp. 929-938

 • Sutherland, L.S. (2018), “A review of impact testing on marine composite materials: Part I – Marine impacts on marine composites”, Composite Structures, Vol. 188, pp. 197-208

 • Sutherland, L.S. (2018), “A review of impact testing on marine composite materials: Part II – Impact event and material parameters”, Composite Structures, Vol. 188, pp. 503-511

 • Sutherland, L.S. (2018), “A review of impact testing on marine composite materials: Part III – Damage tolerance and durability”, Composite Structures, Vol. 188, pp. 512-518

 • Tao, S., Dong, S., Wang, Z. and Guedes Soares, C. (2018), “Intensity division of the sea ice zones in China”, Cold Regions Science and Technology, Vol. 151, pp. 179-187

 • Tekgoz, M., Garbatov, Y. and Guedes Soares, C. (2018), “Strength assessment of a damaged container ship subjected to asymmetrical bending loadings”, Marine Structures, Vol. 58, pp. 172-198

 • Uzunoglu, E. and Guedes Soares, C. (2018), "On the model uncertainty of wave induced platform motions and mooring loads of a semisubmersible based wind turbine", Ocean Engineering, Vol. 148, pp. 277-285

 • Uzunoglu, E. and Guedes Soares, C. (2018), “Parametric modelling of marine structures for hydrodynamic calculations”, Ocean Engineering, Vol. 160, pp. 181-196

 • Varela, J.M., Rodriguez, G.R. and Guedes Soares, C. (2018), “Comparison study between the Fourier and the Hartley transforms for the real-time simulation of the sea surface elevation”, Applied Ocean Research, Vol. 74, pp. 227-236

 • Vettor, R., Prpić-Oršić, J. and Guedes Soares, C. (2018), “Impact of wind loads on long-term fuel consumption and emissions in trans-oceanic shipping”, Brodogradnja, Vol. 69(4), pp. 15-28

 • Wang, S. and Guedes Soares, C. (2018), “Simplified approach to dynamic responses of elastic wedges impacting with water”, Ocean Engineering, Vol. 150, pp. 81-93

 • Wang, Yi, Wu, W. and Guedes Soares, C. (2018), “Experimental and numerical studies of the wave-induced responses of a River-to-Sea ship”, Journal of Marine Science and Application, Vol. 17, pp. 380-388

 • Wnek, A.D., Sutulo, S. and Guedes Soares, C. (2018), “CFD analysis of ship-to-ship hydrodynamic interaction”, Journal Marine Science and Application, Vol. 17, pp. 21-37

 • Woloszyk, K., Kahsin, M. and Garbatov, Y. (2018), “Numerical assessment of ultimate strength of severe corroded stiffened plates”, Engineering Structures, Vol. 168, pp. 346-354

 • Wu, B., Zong, L.K., Yan, X.P. and Guedes Soares, C. (2018), “Incorporating evidential reasoning and TOPSIS into group decision-making under uncertainty for handling ships without command” , Ocean Engineering, Vol. 164, pp. 590-603

 • Xu, H.T. and Guedes Soares, C. (2018), “An Optimized Energy-Efficient Path Following Algorithm for Underactuated Marine Surface Ship Model”, International Journal of Maritime Engineering, Vol. 160(Part 4), pp. A-411 - A421

 • Xu, H.T., Hinostroza, M.A. and Guedes Soares, C. (2018), “Estimation of Hydrodynamic Coefficients of a Nonlinear Manoeuvring Mathematical Model with Free-Running Ship Model Tests, International Journal of Maritime Engineering (RINA Transactions Part A), Vol. 160(A3), pp. A-213 - A-225

 • Xu, S., Ji, C. and Guedes Soares, C. (2018), “Experimental study on taut and hybrid moorings damping and their relation with system dynamics”, Ocean Engineering, Vol. 154, pp. 322-340

 • Xu, S., Ji, C.Y. and Guedes Soares, C. (2018), “Experimental and numerical investigation of a semi-submersible moored by hybrid mooring systems”, Ocean Engineering, Vol. 163, pp. 641-678

 • Yang, B., Guedes Soares, C. e Wang, D-Y. (2018), “An Empirical Formulation for Predicting the Dynamic Ultimate Strength of Rectangular Plates under In-plane Compressive Loading”, International Journal of Mechanical Sciences, Vol. 141, pp. 213-222

 • Yang, B., Wang, D-Y. and Guedes Soares, C. (2018), “Dynamic ultimate strength of outer bottom stiffened plates under in-plane compression and lateral pressure”, Ocean Engineering, Vol. 157, pp. 44-53

 • Yazdi, M. (2018), “Risk assessment based on novel intuitionistic fuzzy-hybrid-modified TOPSIS approach”, Safety Science, Vol. 110, pp. 438-448

 • Yue, JX., Dong, Y. and Guedes Soares, C. (2018), “An Experimental-Finite Element Method Based on Beach Marks to Determine Fatigue Crack Growth Rate in Thick Plates with Varying Stress States”, Engineering Fracture Mechanics, Vol. 196, pp. 123-141

 • Zayed, A., Garbatov, Y. and Guedes Soares, C. (2018), “Corrosion degradation of ship hull steel plates accounting for local environmental conditions”, Ocean Engineering, Vol. 163, pp. 299–306

 • Zhang, J.F., Teixeira, A.P., Guedes Soares, C. and Yan, X. (2018), “Quantitative assessment of collision risk influence factors in the Tianjin port” , Safety Science, Vol. 110, pp. 363-371

 • Zhang, X., Duan, M.G. and Guedes Soares, C. (2018), “Lateral buckling critical force for submarine pipe-in-pipe pipelines”, Applied Ocean Research, Vol. 78, pp. 99 -109

 • Zhang, X., Guedes Soares, C., An, C. and Duan, M. G. (2018) , “An Unified formula for the critical force of lateral buckling of imperfect submarine pipelines”, Ocean Engineering , Vol. 166, pp. 324-335

 • Zhang, Y., Kim, C-W., Beer, M., Dai, H.L. and Guedes Soares, C. (2018), “Modeling multivariate ocean data using asymmetric copulas”, Coastal Engineering, Vol. 135, pp. 91-111



Articles in Books
 • Abdelmalek, M. and Guedes Soares, C. (2018), “Risk assessment of subsea oil and gas production systems at the concept selection phase”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor and Francis, London, UK, pp. 511-524

 • Abdelwahab, H.S. and Guedes Soares, C. (2018), “Motions and mooring loads of a tanker moored at open jetty in long crested irregular waves including second order effects”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor & Francis Group, London, UK, pp. 557-568

 • Atanasova, I., Damyanliev, T., Georgiev, P. and Garbatov, Y. (2018), “Analysis of SME ship repair yard capacity in building new ships”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor & Francis Group, London, UK, pp. 431-438

 • Belga, F., Sutulo, S. and Guedes Soares, C. (2018), “Comparative study of various strip-theory seakeeping codes in predicting heave and pitch motions of fast displacement ships in head seas”, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor & Francis Group, London, UK, pp. 599-610

 • Belga, F., Ventura, M. and Guedes Soares, C. (2018), “Seakeeping optimization of a catamaran to operate as fast crew supplier at the Alentejo basin”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor & Francis Group, London, UK, pp. 587-598

 • Bernardino, M. and Guedes Soares, C. (2018), “Evaluating marine climate change in the Portuguese coast during the 20th century”, Maritime Transportation and Harvesting of Sea Resources, Guedes Soares, C. & Teixeira A.P. (Eds.), Taylor & Francis Group, London, UK, pp. 1089-1095

 • Bharadwaj, U.R., Koch, T., Frank, D., Herrera, L., Randall, G., Volbeda, C., Garbatov, Y., Hirdaris, S., Tsouvalis, N., Carneros, A., Zhou, P. and Atanasova, I. (2018), “Ship Lifecycle Software Solutions (SHIPLYS) - an overview of the project, its first phase of development and challenges”, Maritime Transportation and Harvesting of Sea Resources, Guedes Soares, C. & Teixeira A.P. (Eds.), Taylor & Francis Group, London, UK, pp. 889-896

 • Bhardwaj, U., Teixeira, A.P. and Guedes Soares, C. (2018), “Availability assessment of a power plant working on Allam cycle”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor and Francis, London, UK, pp. 525-536

 • Bhardwaj, U., Teixeira, A.P. and Guedes Soares, C. (2018), “Analysis of accidental fluid release scenarios in FPSOs”, Maritime Transportation and Harvesting of Sea Resources, Guedes Soares, C. & Teixeira A.P. (Eds.), Taylor & Francis Group, London, UK, pp. 1121-1131

 • Botter, R.C., Santos, T.A. and Guedes Soares, C. (2018), “Characterizing container ship traffic along the Portuguese coast using Big Data”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor and Francis, London, UK, pp. 93-100

 • Calvário, M., Sutherland, L.S. and Guedes Soares, C. (2018), “A review of the applications composite materials in wave and tidal energy devices”, Maritime Transportation and Harvesting of Sea Resources, Guedes Soares, C. & Teixeira A.P. (Eds.), Taylor & Francis Group, London, UK, pp. 1111-1117

 • Calvário, M., Teixeira, A.P. and Guedes Soares, C. (2018), “Uncentainty propagation and sensitivity analysis of a laminated composite beam”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor & Francis Group, London, UK, pp. 395-402

 • Carreira, A.M.P. and Guedes Soares, C. (2018), “Liner service operational differentiation in container port terminals”, Maritime Transportation and Harvesting of Sea Resources, Guedes Soares, C. & Teixeira A.P. (Eds.), Taylor & Francis Group, London, UK, pp. 129-136

 • Costa, B., Jacinto, C., Teixeira, A.P. and Guedes Soares, C. (2018), “Causal analysis of accidents at work in a shipyard complemented with Bayesian Nets modeling”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor and Francis, London, UK, pp. 421-430

 • Damyanliev, T., Georgiev, P., Atanasova, I. and Garbatov, Y. (2018), “Conceptual design of multipurpose ship and fleet accounting for SME shipyard building limitations”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor & Francis Group, London, UK, pp. 317-326

 • Denev, Y., Georgiev, P. and Garbatov, Y. (2018), “Analysis of multipurpose ship performance accounting for SME shipyard building limitations”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor & Francis Group, London, UK, pp. 165-174

 • Duan, M.G., Chai, SH., Pasqualino, I.P., Sun, L.P., Myllerup, C., Mavrakos, S., Samanta, A., Kavanagh, K., Ozaki, M., Saevik, S., Teixeira, A.P., Min Low, Y., Seo, J.K., Schreier, S., Swart, P. and Song, H. (2018), “Committee V.8 - Report for Subsea Technology”, 20th International Ship and Offshore Structures Congress (ISSC 2018), Kaminski, M. & Rigo P. (Eds.), IOS Press Ebooks, pp. Vol 2 - 461-523 and Vol 3 - 277-286

 • Fu, T., Babanin, A., Bentamy, A., Campos, R.M., Dong, S., Gramstad, O., Kapsenberg, G., Mao, WG., Miyake, R., Murphy, A.J., Prasetyo, F., Qiu, W. and Sagrillo, L. (2018), “Committee I.1 – Environment”, 20th International Ship and Offshore Structures Congress (ISSC 2018), Kaminski, M. & Rigo P. (Eds.), IOS Press Ebooks. pp. Vol 1 - 1-99 and Vol 3 - 1-12.

 • Gadelho, J.F.M., Mohapatra, S.C. and Guedes Soares, C. (2018), “CFD analysis of a fixed flating box-type structure under regular waves”, Maritime Transportation and Harvesting of Sea Resources, Guedes Soares, C. & Teixeira A.P. (Eds.), Taylor & Francis Group, London, UK, pp. 513-520

 • Garbatov, Y. and Sisci, F. (2018), “Sensitivity analysis of risk-based conceptual ship design”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor and Francis, London, UK, pp. 499-510

 • Garbatov, Y., As, S.K., Branner, K., Choi, B.K., Den Besten, J.H., Dong, P., Lillemae, I., Lindstrom, P., Lourenço de Souza, M., Parmentier, G., Quemener, Y., Rizzo, C.M., Rorup, J., Vhanmane, S., Villavicencio, R., Wang, F. and Yue, J. (2018), “Committee III.2 - Fatigue and Fracture”, 20th International Ship and Offshore Structures Congress (ISSC 2018), Kaminski, M. & Rigo P. (Eds.), IOS Press Ebooks, pp. Vol 1 - 441-547 and Vol 3 - 85-108

 • Garbatov, Y., Dong, Y., Rorup, J., Vhanmane, S. and Villavicencio, R. (2018), “Fatigue reliability of butt-welded joints based on spectral fatigue damage assessment”, Maritime Transportation and Harvesting of Sea Resources, Guedes Soares, C. & Teixeira A.P. (Eds.), Taylor & Francis Group, London, UK, pp. 611-616

 • Garbatov, Y., Ventura, M., Georgiev, P., Damyanliev, T. and Atanasova, I. (2018), “Investment cost estimate accounting for shipbuilding constraints”, Maritime Transportation and Harvesting of Sea Resources, Guedes Soares, C. & Teixeira A.P. (Eds.), Taylor & Francis Group, London, UK, pp. 913-920

 • Garbatov, Y., Ventura, M., Guedes Soares, C., Georgiev, P., Koch, T. and Atanasova, I. (2018), “Framework for conceptual ship design accounting for risk-based life cycle assessment”, Maritime Transportation and Harvesting of Sea Resources, Guedes Soares, C. & Teixeira A.P. (Eds.), Taylor & Francis Group, London, UK, pp. 921-930

 • Gordo, J.M. and Leal, M.A. (2018), “A tool for analysis of costs on the manufacturing of the hull”, Maritime Transportation and Harvesting of Sea Resources, Guedes Soares, C. & Teixeira A.P. (Eds.), Taylor & Francis Group, London, UK, pp. 743-748

 • Guo, Y., Mohapatra, S.C. and Guedes Soares, C. (2018), “Wave interaction with a rectangular long floating structure over flat bottom”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor & Francis Group, London, UK, pp. 647-656

 • Hallak, T.S. and Simos, A.N. (2018), “Influences of a bow turret system on an FPSO's pitch RAO”, Maritime Transportation and Harvesting of Sea Resources, Guedes Soares, C. & Teixeira A.P. (Eds.), Taylor & Francis Group, London, UK, pp. 465-471

 • Hallak, T.S., Ventura, M. and Guedes Soares, C. (2018), “Parametric equations for the design of a logistic support platform”, Maritime Transportation and Harvesting of Sea Resources, Guedes Soares, C. & Teixeira A.P. (Eds.), Taylor & Francis Group, London, UK, pp. 49-56

 • Hashemzadeh, M., Garbatov, Y. and Guedes Soares, C. (2018), “Assessment of distortion and residual stresses in butt welded plates made of different steels”, Maritime Transportation and Harvesting of Sea Resources, Guedes Soares, C. & Teixeira A.P. (Eds.), Taylor & Francis Group, London, UK, pp. 617-623

 • Hassan, M.A.A.A. and Guedes Soares, C. (2018), “Multibody dynamics of floaters during installation of a spar floating wind turbine”, Maritime Transportation and Harvesting of Sea Resources, Guedes Soares, C. & Teixeira A.P. (Eds.), Taylor & Francis Group, London, UK, pp. 371-380

 • Haugen, S., Ventikos, N.P., Teixeira, A.P. and Montewka, J. (2018), “Trends and needs for research in maritime risk”, Maritime Transportation and Harvesting of Sea Resources, Guedes Soares, C. & Teixeira A.P. (Eds.), Taylor & Francis Group, London, UK, pp. 313-321

 • Hinostroza, M.A. and Guedes Soares, C. (2018), “Collision avoidance, guidance and control system for Autonomous Surface Vehicles in complex navigation conditions”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, pp. Taylor & Francis Group, London, UK, pp. 121-132

 • Hinostroza, M.A., Xu, H.T. and Guedes Soares, C. (2018), “Experimental and numerical simulations of zig-zag manoeuvres of a self-running ship model”, Maritime Transportation and Harvesting of Sea Resources, Guedes Soares, C. & Teixeira A.P. (Eds.), Taylor & Francis Group, London, UK, pp. 563-570

 • Hinostroza, M.A., Xu, H.T. and Guedes Soares, C. (2018), “Path-planning and path-following control system for autonomous surface vessel”, Maritime Transportation and Harvesting of Sea Resources, Guedes Soares, C. & Teixeira A.P. (Eds.), Taylor & Francis Group, London, UK, pp. 991-998

 • Islam, H. and Akimoto, H. (2018), “Simulation dependency on degrees of freedom in RaNS solvers for predicting ship resistance”, Maritime Transportation and Harvesting of Sea Resources, Guedes Soares, C. & Teixeira A.P. (Eds.), Taylor & Francis Group, London, UK, pp. 521-526

 • Islam, H. and Guedes Soares, C. (2018), “A CFD study of a ship moving with constant drift angle in calm water and waves”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor & Francis Group, London, UK, pp. 185-194

 • Islam, H. and Guedes Soares, C. (2018) , “Prediction of ship resistance in head waves using OpenFOAM”, Maritime Transportation and Harvesting of Sea Resources, Guedes Soares, C. & Teixeira A.P. (Eds.), Taylor & Francis Group, London, UK, pp. 527-533

 • Islam, H., Mohapatra, S.C. and Guedes Soares, C. (2018), “Comparisons of CFD, experimental and analytical simulations of a heaving box-type floating structure” , Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor & Francis Group, London, UK, pp. 633-640

 • Jafaryeganeh, H. and Guedes Soares, C. (2018), “Comparison of two approaches for prediction of wave induced loads in damaged ships”, Maritime Transportation and Harvesting of Sea Resources, Guedes Soares, C. & Teixeira A.P. (Eds.), Taylor & Francis Group, London, UK, pp. 473-481

 • Jafaryeganeh, H., Ventura, M. and Guedes Soares, C. (2018), “Parametric modelling of tanker internal compartment layout for survivability improvement within the framework of regulations”, Maritime Transportation and Harvesting of Sea Resources, Guedes Soares, C. & Teixeira A.P. (Eds.), Taylor & Francis Group, London, UK, pp. 23-30

 • Kamarlouei, M., Gaspar, J.F. and Guedes Soares, C. (2018), “Evaluating a novel control strategy to improve the performance of hydraulic power take-offs in wave energy converters”, Maritime Transportation and Harvesting of Sea Resources, Guedes Soares, C. & Teixeira A.P. (Eds.), Taylor & Francis Group, London, UK, pp. 1185-1192

 • Kharghani, N. and Guedes Soares, C. (2018), “Experimental study of the residual strength of damaged hybrid steel-FRP balcony overhangs of ships”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor & Francis Group, London, UK, pp. 403-412

 • Lazakis, I., Bronsart, R., Caparace, J-D., Chen, Y., Georgiev, P., Ilnitskiy, I., Moro, L., Prebeg, P., Mendonça Santos, J., Sekulski, Z., Sicchiero, M., Sielski, R., Tang, W., Toyoda, M. and Varela, J. (2018), “Committee IV.2 - Design Methods”, 20th International Ship and Offshore Structures Congress (ISSC 2018), Kaminski, M. & Rigo P. (Eds.), IOS Press Ebooks, pp. Vol 1 - 609-708 and Vol 3 - 131-158

 • Mathias, N.A.S., Santos, T.A. and Guedes Soares, C. (2018), “Analysis of a new container terminal using a simulation approach”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor and Francis, London, UK, pp. 43-52

 • McSullea, G.T.P., Rodrigues, J.M. and Guedes Soares, C. (2018), “Wake of a catamaran navigating in restricted waters”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor & Francis Group, London, UK, pp. 175-184

 • Muraleedharan, G., Lucas, C. and Guedes Soares, C. (2018), “Peak period statistics associated with significant wave heights by conditional mean functions of the distributions”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor & Francis Group, London, UK, pp. 693-698

 • Nascimento, F., Sutherland, L.S. and Garbatov, Y. (2018), “Experimental and numerical structural analysis of a windsurf fin”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor & Francis Group, London, UK, pp. 387-394

 • Oliveira, A. and Gordo, J. M. (2018), “Implementation of new production processes in panel's line”, Maritime Transportation and Harvesting of Sea Resources, Guedes Soares, C. & Teixeira A.P. (Eds.), Taylor & Francis Group, London, UK, pp. 763-773

 • Oliveira, A. and Gordo, J.M. (2018), “Model to forecast times and costs of cutting, assembling and welding stages of construction of ship blocks”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor & Francis Group, London, UK, pp. 413-420

 • Oliveira, A. and Gordo, J.M. (2018), “Cutting processes in shipbuilding - a case study”, Maritime Transportation and Harvesting of Sea Resources, Guedes Soares, C. & Teixeira A.P. (Eds.), Taylor & Francis Group, London, UK, pp. 757-762

 • Pedro, F.G.L., Santos, J.A., Pinheiro, L.V., Fortes, C.J.E.M. and Hinostroza, M.A. (2018), “Characterization of ship motions induced by wake waves”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor & Francis Group, London, UK, pp. 547-556

 • Rodrigues, S.R.A., Santos, J.A. e Guedes Soares, C. (2018), “Numerical and experimental study of ship-generated waves”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor & Francis Group, London, UK, pp. 569-578

 • Rong, H., Teixeira, A.P. and Guedes Soares, C. (2018), “A model for predicting ship destination routes based on AIS data”, Maritime Transportation and Harvesting of Sea Resources, Guedes Soares, C. & Teixeira A.P. (Eds.), Taylor & Francis Group, London, UK, pp. 257-264

 • Rörup, J., Garbatov, Y., Dong, Y., Uzunoglu, E., Parmentier, G., Andoniu, A., Quemener, Y., Chen, K-C., Vhanmane, S., Negi, A., Parihar, Y., Villavicencio, R., Parsoya, V., Peng, L. and Yue, J. (2018), “Round robin study on spectral fatigue assessment of butt-welded joints”, Maritime Transportation and Harvesting of Sea Resources, Guedes Soares, C. & Teixeira A.P. (Eds.), Taylor & Francis Group, London, UK, pp. 663-670

 • Rusu, L., Bernardino, M. and Guedes Soares, C. (2018), “Analysis of extreme storms in the Black Sea”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor & Francis Group, London, UK, pp. 699-704

 • Rusu, L., Goncalves, M. and Guedes Soares, C. (2018), “Prediction of storm conditions using wind data from the ECMWF and NCEP reanalysis”, Maritime Transportation and Harvesting of Sea Resources, Guedes Soares, C. & Teixeira A.P. (Eds.), Taylor & Francis Group, London, UK, pp. 1111-1117

 • Saad-Eldeen, S., Garbatov, Y. and Guedes Soares, C. (2018), “Failure assessment of wash plates with different degree of openings”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor & Francis Group, London, UK, pp. 377-386

 • Saad-Eldeen, S., Garbatov, Y. and Guedes Soares, C. (2018), “Ultimate bending capacity of multi-bay tubular reinforced structures”, Maritime Transportation and Harvesting of Sea Resources, Guedes Soares, C. & Teixeira A.P. (Eds.), Taylor & Francis Group, London, UK, pp. 671-678

 • Santos, A.M.P., Silva, L.M.R., Santos, T.A. and Guedes Soares, C. (2018), “A simulation approach applied to the optimization of offshore crew transportation problems”, Maritime Transportation and Harvesting of Sea Resources, Guedes Soares, C. & Teixeira A.P. (Eds.), Taylor & Francis Group, London, UK, pp. 1133-1140

 • Santos, T.A. and Guedes Soares, C. (2018), “Methodology for estimating technical characteristics of container ships from AIS data”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor and Francis, London, UK, pp. 101-110

 • Santos, T.A. and Guedes Soares, C. (2018), “Methodology for the identification of the potential hinterland of container terminals”, Maritime Transportation and Harvesting of Sea Resources, Guedes Soares, C. & Teixeira A.P. (Eds.), Taylor & Francis Group, London, UK, pp. 157-166

 • Santos, T.A. and Guedes Soares, C. (2018), “Economic feasibility of an autonomous container ship”, Maritime Transportation and Harvesting of Sea Resources, Guedes Soares, C. & Teixeira A.P. (Eds.), Taylor & Francis Group, London, UK, pp. 861-870

 • Santos, T.A., Guedes Soares, C. and Botter, R.C. (2018), “Charaterizing the operation of a roll-on roll-off short sea service”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor and Francis, London, UK, pp. 77-88

 • Silva, L.M.R. and Guedes Soares, C. (2018), “Helicopter fleet size and mixed vehicle routing problem for crew exchange on an offshore oil and gas field”, Maritime Transportation and Harvesting of Sea Resources, Guedes Soares, C. & Teixeira A.P. (Eds.), Taylor & Francis Group, London, UK, pp. 1157-1164

 • Simões, A., Salvador, R. and Guedes Soares, C. (2018), “Evaluation of the Portuguese ocean economy using the satellite account for the sea”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor and Francis, London, UK, pp. 63-68

 • Sisci, F. and Ventura, M. (2018), “Tool for initial hull structure dimensioning at ship concept”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor & Francis Group, London, UK, pp. 309-316

 • Stoev, L., Georgiev, P. and Garbatov, Y. (2018), “Offshore sulfide power plant for the Black Sea”, Maritime Transportation and Harvesting of Sea Resources, Guedes Soares, C. & Teixeira A.P. (Eds.), Taylor & Francis Group, London, UK, pp. 31-36

 • Sutulo, S. and Guedes Soares, C. (2018), “Comparative simulation of definitive manoeuvres of the KVLCC2 benchmark ship using different empiric mathematical models”, Maritime Transportation and Harvesting of Sea Resources, Guedes Soares, C. & Teixeira A.P. (Eds.), Taylor & Francis Group, Lon

 • Tadros, M., Ventura, M. and Guedes Soares, C. (2018), “Optimization scheme for the selection of the propeller in ship concept design”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor & Francis Group, London, UK, pp. 233-240

 • Tadros, M., Ventura, M. and Guedes Soares, C. (2018), “Surrogate models of the performance and exhaust emissions of marine diesel engines for ship conceptual design", Maritime Transportation and Harvesting of Sea Resources, Guedes Soares, C. & Teixeira A.P. (Eds.), Taylor & Francis Group, London, UK, pp. 105-112

 • Tadros, M., Ventura, M. and Guedes Soares, C. (2018), “Surrogate models of the performance and exhaust emissions of marine diesel engines for ship conceptual design”, Maritime Transportation and Harvesting of Sea Resources, Guedes Soares, C. & Teixeira A.P. (Eds.), Taylor & Francis Group, London, UK, pp. 105-112.

 • Tadros, M., Ventura, M. and Guedes Soares, C. (2018), “Optimization scheme for the selection of the propeller in ship concept design”, Progress in Maritime Technology and Engineering, Guedes Soares, C. & Santos T.A., (Eds.), Taylor & Francis Group, London, UK, pp. 233-240.

 • Taveira-Pinto, F., Rosa-Santos, P., Rodriguez, C.A., López, M., Ramos, V., Xu, S., Rezanejad, K., Wang, S. and Guedes Soares, C. (2018), “Optimization of wave energy converters in the OPWEC Project”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor & Francis Group, London, UK, pp. 657-666

 • Tekgoz, M., Garbatov, Y. and Guedes Soares, C. (2018), “Residual strength assessment of a grounded container ship subjected to asymmetrical bending loads”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor & Francis Group, London, UK, pp. 337-344

 • Truelock, D., Czaban, Z., Luo, H., Wang, X., Holtmann, M., Begovic, E., Yasuda, A., Ventura, M., Nicholls-Ee, R., Oterkus, E. and Sensharma, P. (2018), “Committee V.5 - Special Craft”, 20th International Ship and Offshore Structures Congress (ISSC 2018), Kaminski, M. & Rigo P. (Eds.), IOS Press Ebooks, pp. Vol 2 - 279-345 and Vol 3 - 231-245

 • Vettor, R., Tadros, M., Ventura, M., and Guedes Soares, C. (2018), “Influence of main engine control strategies on fuel consumption and emissions”, Progress in Maritime Technology and Engineering, Guedes Soares, C. & Santos T.A., (Eds.), Taylor & Francis Group, London, UK, pp. 157-164

 • Vettor, R., Tadros, M., Ventura, M., and Guedes Soares, C. (2018), “Influence of main engine control strategies on fuel consumption and emissions”, Progress in Maritime Technology and Engineering, Guedes Soares, C. & Santos T.A., (Eds.), Taylor & Francis Group, London, UK, pp. 157-164.

 • Xu, H.T., Hinostroza, M.A. and Guedes Soares, C. (2018), “A hybrid controller design for ship autopilot based on free-running model test”, Maritime Transportation and Harvesting of Sea Resources, Guedes Soares, C. & Teixeira A.P. (Eds.), Taylor & Francis Group, London, UK, pp. 1051-1059

 • Xu, S., Wang, S., Hallak, T.S., Rezanejad, K., Hinostroza, M.A., Guedes Soares, C., Rodriguez, C.A., Rosa-Santos, P. and Taveira-Pinto, F. (2018) , “Experimental study of two mooring systems for wave energy converters”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor & Francis Group, London, UK, pp. 667-686

 • Yazdi, M. and Zarei, E. (2018), “Uncertainty Handling in the Safety Risk Analysis: An Integrated Approach Based on Fuzzy Fault Tree Analysis”, J Fail. Anal. and Preven., Vo. 18, pp. 392–404

 • Yeter, B., Garbatov, Y. and Guedes Soares, C. (2018), “Failure assessment of transition piece of jacket offshore wind turbine”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor & Francis Group, London, UK, pp. 359-368

 • Yeter, B., Garbatov, Y. and Guedes Soares, C. (2018), “Probabilistic life-cycle assessment for offshore wind turbines”, Maritime Transportation and Harvesting of Sea Resources, Guedes Soares, C. & Teixeira A.P. (Eds.), Taylor & Francis Group, London, UK, pp. 1229-1237

 • Yue, JX., Dong, Y. and Guedes Soares, C. (2018), “An Experimental-Finite Element Method Based on Beach Marks to Determine Fatigue Crack Growth Rate in Thick Plates with Varying Stress States, Engineering Fracture Mechanics, Vol. 196, pp. 123-141

 • Zeng, Y., Zhang, J.F., Teixeira, A.P. and Guedes Soares, C. (2018), “Role assignment and conflict identification for the encounter ships under COLREGs”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor and Francis, London, UK, pp. 137-146



Articles in Conferences
 • Beites, N., Dias, M., Mendes, M.J.G.C., Carreira, F., Campos, F. and Calado, J.M.F. (2018), “A gantry robot automatic positioning system using computational vision”, Proceedings of the 1st Iberic Conference on Theoretical and Experimental Mechanics and Materials, 4-7 November, Porto, Portugal, pp. 1031-1042

 • Bernardino, M., Goncalves, M., Lucas, C. and Guedes Soares, C. (2018), “Numerical forecast of the weather in Portugal: the state-of-the-art and new challenges (in Portuguese)", IPMA Workshop, 26-27 November, Lisbon, Portugal.

 • Chen, B.Q. and Guedes Soares, C. (2018), “Numerical investigation on weld induced imperfections in aluminium ship plates”, Proceedings of the ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2018), 17-22 June, Madrid, Spain

 • Chen, B.Q., Hashemzadeh, M., Garbatov, Y. and Guedes Soares, C. (2018), “Recent developments in experimental and numerical assessments of welding-induced residual stresses”, Proceedings of the ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2018), 17-22 June, Madrid, Spain

 • Datta, R., Rodrigues, J.M. and Guedes Soares, C. (2018), “Prediction of motions and wave induced loads on a container ship using non linear 3D time domain panel method”, 4th International Conference in Ocean Engineering (ICOE 2018), 18-21 February, Normandy, Northern France

 • Dong, Y., Garbatov, Y. and Guedes Soares, C. (2018), “Strain-based fatigue reliability analysis of a load-carrying fillet welded cruciform joint”, Arctic Engineering (OMAE 2018), 17-22 June, Madrid, Spain

 • Dong, Y., Garbatov, Y. and Guedes Soares, C. (2018), “Fatigue reliability assessment of fillet welded cruciform joints based on the fatigue notch factor and the local strain approach”, Proceedings of the ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2018), 17-22 June, Madrid, Spain

 • Dong, Y., Garbatov, Y. and Guedes Soares, C. (2018), “Strain-based fatigue reliability analysis of a load-carrying fillet welded cruciform joint”, Proceedings of the ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2018), 17-22 June, Madrid, Spain

 • Ferreira, P. and Bellini, E. (2018), “Managing interdependencies in critical infrastructures - a cornerstone for system resilience”, 28th European Safety and Reliability Conference (ESREL 2018), 17-21 June, Trondheim, Norway

 • Garbatov, Y. and Guedes Soares, C. (2018), “Corrosion margins for redundant ship structures”, Proceedings of the ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2018), 17-22 June, Madrid, Spain

 • Gordo, J. M. and Guedes Soares, C. (2018), “Pure bending test on a box girder with low panel's slenderness”, Arctic Engineering (OMAE 2018), 17-22 June, Madrid, Spain

 • Hallak, T. S., Ventura, M., and Guedes Soares, C. (2018), “An optimization method for the concept design of semi-submersible offshore accommodation units”, Proceedings of the ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2018), 17-22 June, Madrid, Spain

 • Hallak, T.S., Gaspar, J.F., Kamarlouei, M., Calvário, M., Mendes, M.J.G.C., Thiebaut, F. and Guedes Soares, C. (2018), “Numerical and Experimental analysis of a hybrid wind-wave offshore floating platform's hull”, Proceedings of the ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2018), 17-22 June, Madrid, Spain

 • Hinostroza, M.A., Guedes Soares, C. and Xu, H.T. (2018), “Motion planning, guidance and control system for autonomous surface vessel”, Proceedings of the ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2018), 17-22 June, Madrid, Spain

 • Kumawat, A.K., Karmakar, D. and Guedes Soares, C. (2018), “Numerical investigation of semi-submersible floating wind turbine combined with flap-type WECs”, 4th International Conference in Ocean Engineering (ICOE 2018), 18-21 February, Normandy, Northern France

 • Kumawat, A.K., Karmakar, D. and Guedes Soares, C. (2018), “Wave energy conversion by multiple bottom-hinged surging WEC”, 4th International Conference in Ocean Engineering (ICOE 2018), 18-21 February, Normandy, Northern France

 • Liu, B., Chen, L., Liao, XT., Zhu, L. and Guedes Soares, C. (2018), “Finite element analysis of a container ship struck by rigid and deformable bows”, Proceedings of the ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2018), 17-22 June, Madrid, Spain

 • Liu, B., Villavicencio, R., Liu, K., Zhu, L. and Guedes Soares, C. (2018), “Response of an aluminum stiffened plate under extreme slamming loadings”, Proceedings of the ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2018), 17-22 June, Madrid, Spain

 • Mendes, M.J.G.C., Neto, I.M.M.S. and Calado, J.M.F. (2018), “Fault Diagnosis System Via Internet Applied to a Gantry Robot - A Proposal for Industry 4.0”, 18th IEEE International Conference on Autonomous Robot Systems and Competitions (ICARSC), 25-27 April, Torres Vedras, Portugal

 • Mikulic, A., Parunov, J. and Guedes Soares, C. (2018), “Global wave loads in damaged ship”, 23rd Symposium on the Theory and Practice of Shipbuilding (SORTA 2018), 27-29 September, Split, Croatia.

 • Pedro, F.G.L., Santos, J.A., Pinheiro, L.V., Fortes, C.J.E.M. and Hinostroza, M.A. (2018), “Analysis of the influence of the variability of depth on the interaction between two ships”, 14º Congresso da Agua (AGUA 2018), 7-9 March, Évora, Portugal

 • Pedro, F.G.L., Santos, J.A., Pinheiro, L.V., Fortes, C.J.E.M. and Hinostroza, M.A. (2018), “Numerical and Experimental Studies on Ship Motions Induced by Passing Ships”, Proceedings of the ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2018), 25-30 June, Madrid, Spain

 • Ponce de Leon, S., Bettencourt, J., van Vledder, G., Doohan, P., Higgins, C., Guedes Soares, C. and Dias, F. (2018), “Performance of WAVEWATCH-III and SWAN models in the North Sea”, Proceedings of the ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2018), 17-22 June, Madrid, Spain

 • Ponce de Leon, S., Osborne, A.R. and Guedes Soares, C. (2018), “On the importance of the exact nonlinear interactions in the spectral characterization of rogue waves”, Proceedings of the ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2018), 17-22 June, Madrid, Spain

 • Rajendran, S. and Guedes Soares, C. (2018), “Marine Vehicles and Floating Systems: Effect of slamming and green water on short term distribution of vertical bending moment of a containership in abnormal waves”, 4th International Conference in Ocean Engineering (ICOE 2018), 18-21 February, Normandy, Northern France

 • Rajendran, S. and Guedes Soares, C. (2018), “Short term statistics of hydroelastic loads of a containership in head and oblique seas”, Proceedings of the ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2018), 17-22 June, Madrid, Spain

 • Ren. H., Xu, C., Zhou, XQ., Sutulo, S., Guedes Soares, C. and Li, C.F. (2018), “Analysis of numerical errors of the Hess Smith Panel Method with asymmetric meshes”, Proceedings of the ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2018), 17-22 June, Madrid, Spain

 • Rodriguez, G., Guedes Soares, C. and Nieto Borge, J.C. (2018), “Exploring distribuitonal properties of the maximum wave height in a sea state”, Proceedings of the ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2018), 17-22 June, Madrid, Spain

 • Roque, A. and Sobral, J. (2018), “Motion amplification technology as a tool to support maintenance decisions”, Maintenance Performance Measurement and Management 2018, 21-23 June, Coimbra, Portugal

 • Roque, A. and Sobral, J. (2018), “Predictive Maintenance using Ultrasound Technology as Condition Monitoring”, Maintenance Performance Measurement and Management 2018, 21-23 June, Coimbra, Portugal

 • Santoro, A., Arena, F. and Guedes Soares, C. (2018), “On the sequence of large waves from field data”, Proceedings of the ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2018), 17-22 June, Madrid, Spain

 • Santos, A.M.P., Guedes Soares, C., Campos, A., Silva, A.D., Garrido, S. and Drago, T. (2018) , “Autonomous Observing Systems in Fishing Vessels for the Support of Marine Ecosystem Management”, Forum on Fisheries Science in the Mediterranean and the Black Sea (FAO 2018), 10-14 December, Rome, Italy

 • Santos, J.A., Pinheiro, L.V., Abdelwahab, H.S., Pedro, F.G.L., Fortes, C.J.E.M., Hinostroza, M.A. and Guedes Soares, C. (2018), “Physical modelling of motions and forces on a moored ship at the Leixões Port”, 8º MCSul - Conferencia Sul em Modelagem Computacional e VIII SEMENGO - Seminario e Workshop em Engenharia Oceânica, 22-24 October, Cidade de Rio Grande, Rio Grande do Sul, Brasil.

 • Sobral, J. and Guedes Soares, C. (2018), “Identification of Outliers in Failure Data”, 3rd International Conference on Maintenance Engineering (IncoME 2018), 6-7 September, Coimbra, Portugal, pp. 247-261.

 • Sobral, J. and Rodrigues, S. (2018), “Reliability of composite materials based on accelerated life tests”, 3rd International Conference on Maintenance Engineering (IncoME 2018), 6-7 September, Coimbra, Portugal, pp. 236-246.

 • Sutulo, S. and Guedes Soares, C. (2018) , “Comparative testing of an identification method based on the genetic and ABC algorithms”, Proceedings of The International Marine Simulator Forum (MARSIM 2018), 12-16 August, Halifax, Canada

 • Sutulo, S. and Guedes Soares, C. (2018), “Prediction of manoeuvring characteristics of the KVLCC2 ship with a hybrid system-based code”, Workshop on Verification and Validation of Ship Manoeuvring Simulation Methods (SIMMAN 2014), 7-10 Dec 2014

 • Teixeira, A.P. and Guedes Soares, C. (2018), “Adaptive methods for reliability analysis of marine structures”, Proceedings of the ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2018), 17-22 June, Madrid, Spain

 • Teixeira, A.P. and Guedes Soares, C. (2018), “Risk of maritime traffic in coastal waters”, Proceedings of the ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2018), 17-22 June, Madrid, Spain

 • Wang, S. and Guedes Soares, C. (2018), “A numerical investigation on water slamming of stiffened panels”, Proceedings of the ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2018), 17-22 June, Madrid, Spain

 • Wang, S., Rajendran, S. and Guedes Soares, C. (2018), “Investigation of bottom slamming on ships in irregular waves”, Proceedings of the ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2018), 17-22 June, Madrid, Spain

 • Xu, H.T., Hassani, V. and Guedes Soares, C. (2018), “Parameters estimation of nonlinear manoeuvring model for marine surface ship based on PMM tests”, Proceedings of the ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2018), 17-22 June, Madrid, Spain

 • Xu, H.T., Hassani, V., Hinostroza, M.A. and Guedes Soares, C. (2018), “Real-time parameter estimation of nonlinear vessel steering model using support vector machine”, Proceedings of the ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2018), 17-22 June, Madrid, Spain

 • Xu, S., Guedes Soares, C. and Teixeira, A. P. (2018), “Reliablity analysis of short term mooring tension of a semi-submersible system”, Proceedings of the ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2018), 17-22 June, Madrid, Spain

 • Xu, S., Ji, C.-Y. and Guedes Soares, C. (2018), “Analysis of catenary mooring systems based on truncated mooring experiments”, Proceedings of the ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2018), 17-22 June, Madrid, Spain

 • Yeter, B., Garbatov, Y. and Guedes Soares, C. (2018), “Risk-based assessment of fixed offshore wind turbine support structures”, Proceedings of the ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2018), 17-22 June, Madrid, Spain

 • Yeter, B., Garbatov, Y. and Guedes Soares, C. (2018), “Strength assessment of jacket offshore wind turbine support structure accounting for rupture”, Proceedings of the ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2018), 17-22 June, Madrid, Spain

 • Yeter, B., Garbatov, Y., Guedes Soares, C., Punuai, W. and Azad, M.D.S. (2018), “Response of monopile offshore wind turbine structure subjected to seismic loads and degradation”, Proceedings of the 7th Asia Conference on Earthquake Engineering, 22-25 November, Bangkok, Thailand

 • Zhang, J., Liu, Q., Shi, X. and Guedes Soares, C. (2018), “Experimental study on the wave loads on monopile and jacket type support of offshore wind turbines”, Arctic Engineering (OMAE 2018), 17-22 June, Madrid, Spain

 • Zhang, J., Liu, Q., Shi, X. and Guedes Soares, C. (2018), “Experimental study on the wave loads on monopile and jacket type support of offshore wind turbines”, Proceedings of the ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2018), 17-22 June, Madrid, Spain



For information about all CENTEC publications you can download: Download the Complete List of CENTEC Publications