|
|
 Articles in Journals • Abbasnia, A. and Guedes Soares, C. (2017), “Exact evaluation of hydrodynamic loads on ships using NURBS surfaces and acceleration potential”, Journal of Engineering Analysis With Boundary Elements, Vol. 85, pp. 1-12
• Abbasnia, A. e Guedes Soares, C. (2017), “Exact evaluation of hydrodynamic loads on ships using NURBS surfaces and acceleration potential”, Journal of Engineering Analysis With Boundary Elements, Vol. 85, pp. 1-12
• Bahmyari, E., Khedmati, M.R. and Guedes Soares, C. (2017) , “Stochastic Analysis of Moderately Thick Plates Using the Generalized Polynomial Chaos and Element Free Galerkin method”, Engineering Analysis With Boundary Elements, Vol. 79, pp. 23-37
• Bahmyari, E., Khedmati, M.R. and Guedes Soares, C. (2017) , “Stochastic Analysis of Coupled Heave-Roll Ship Motion Using the Domain Decomposition Chaotic Radial Basis Function”, Ocean Engineering, Vol. 140, pp. 322-333
• Beckert, J., Mendes, J.P., Alves, F. and Neuparth, N. (2017), “Systemic Approach Towards Understanding Exercise Tolerance: The Case for a Mathematical Model Application” (In Portuguese), Gazeta Medica, Vol. 2(4), pp. 71-77
• Bernardino, M., Rusu, L. and Guedes Soares, C. (2017), “Evaluation of the wave energy resources in the Cape Verde Islands”, Renewable Energy, 2017, Vol. 101, pp. 316-326
• Campos, R. and Guedes Soares C. (2017), “Assessment of Three Wind Reanalysis in the North Atlantic Ocean", Journal of Operational Oceanography, Vol. 10(1), pp. 30-44
• Castro-Santos, L., Martins, E. and Guedes Soares, C. (2017), “Economic comparison of technological alternatives to harness offshore wind and wave energies”, Energy, Vol. 140, pp. 1121-1130
• Fonseca, R.B., Goncalves, M. and Guedes Soares, C. (2017) , “Comparing the performance of spectra wave model for coastal areas”, Journal of Coastal Research, 2017, Vol. 33(2), pp. 331-346
• Garbatov, Y. and Guedes Soares, C. (2017), “Fatigue Reliability of Dented Pipeline based on Limited Experimental Data”, International Journal of Press Vessels Piping, Vol. 155, pp. 15-26
• Garbatov, Y., Tekgoz, M. and Guedes Soares, C. (2017), “Experimental and Numerical Strength Assessment of Stiffened Plates Subjected to Severe Non-uniform Corrosion Degradation and Compressive Load” , Ship and Offshore Structures, Vol. 12(4), pp. 46
• Gaspar, B., Teixeira, A.P. and Guedes Soares, C. (2017), “Adaptive surrogate model with active refinement combining Kriging and a trust region method”, Reliability Engineering and System Safety, Vol. 165, pp. 277–291
• Gaspar, J.F., Fontul, M., Henriques, E. and Silva, A. (2017), “Haptics of in-car radio buttons and its relationship with engineering parameters”, International Journal of Industrial Ergonomics, Vol. 59 pp. 29-45
• Gaspar, J.F., Kamarlouei, M., Sinha, A., Xu, H.T., Calvario, M., Francois-Xavier, Fa., Robles, E. e Guedes Soares, C. (2017), “Analysis of electrical drive speed control limitations of a power take-off system for wave energy converters” , Renewable Energy, Vol. 113, pp. 335-346
• Gonçalves, P., Sobral, J. and Ferreira, L.A. (2017), “Unmanned aerial vehicle safety assessment modelling through petri Nets”, Reliability Engineering and System Safety, Vol. 167, pp. 383-393
• Hashemzadeh, M., Garbatov, Y. and Guedes Soares, C. (2017), “Analytically based equations for distortion and residual stress estimations of thin butt-welded plates”, Engineering Structures, Vol. 137, pp. 115-124
• Ji, QL., Dong, S., Luo, X. and Guedes Soares, C. (2017), “Wave Transformation over Submerged Breakwaters by the Constrained Interpolation Profile Method”, Ocean Engineering, 2017, Vol. 136, pp. 294-303
• Lavrov, A., Rodrigues, J.M., Gadelho, J.F.M. and Guedes Soares, C. (2017), “Calculation of hydrodynamic coefficients of ship sections in roll motion using Navier-Stokes equations”, Ocean Engineering, Vol. 133, pp. 36-46
• Li, C.F., Ren, H.L., Zhu, Z.Y. and Guedes Soares, C. (2017), “Finite Element Analysis of the ultimate strength of aluminium-stiffended panels with fixed and floating transverse frames”, Journal of Offshore Mechanics and Arctic Engineering, Vol. 139, pp. 041401-1 - 041401-10
• Liu, B. and Guedes Soares, C. (2017), “Influence of impact location on the plastic response and failure of rectangular cross-section tubes struck transversely by a hemispherical indenter”, Journal of Offshore Mechanics and Arctic Engineering, Vol. 139, pp. 021603-1-021603-12
• Liu, B., Villavicencio, R., Zhang, S. and Guedes Soares, C. (2017), “A simple criterion to evaluate the rupture of materials in ship collision simulations”, Marine Structures, Vol. 54, pp. 92-111
• Liu, B., Villavicencio, R., Zhang, S. and Guedes Soares, C. (2017), “Assessment of external dynamics and internal mechanics in ship collisions”, Ocean Engineering, Vol. 141, pp. 326-336
• Lucas, C., Muraleedharan, G. and Guedes Soares, C. (2017) , “Regional Frequency Analysis of Extreme Waves in a Coastal Area”, Coastal Engineering, Vol. 126, pp. 81-95
• Marta-Almeida, M., Cirano, M., Guedes Soares, C. and Lessa, G.C. (2017), “A numerical tidal stream energy assessment study for Baia de Todos os Santos, Brazil”, Renewable Energy, 2017, Vol. 107, pp. 271-287
• Pascoal, R., Perera, L.P. and Guedes Soares, C. (2017), “Estimation of Directional Sea Spectra from Ship Motions in Sea Trials”, Ocean Engineering, Vol. 132, pp. 126-137
• Perera, L.P. and Guedes Soares, C. (2017), “Weather Routing and Safe Ship Handling in the Future of Shipping”, Ocean Engineering, 2017, Vol. 130, pp. 684-695
• Rezanejad, K., Guedes Soares, C., López, I. and Carballo, R. (2017), “Experimental and numerical investigation of the hydrodynamic performance of an oscillating water column wave energy converter”, Renewable Energy, Vol. 106, pp. 1-16
• Robertson, A.N.,...,Uzunoglu, E., Guedes Soares, C.,...etal (2017), “OC5 Project Phase II: Validation of Global Loads of the DeepCwind Floating Semisubmersible Wind Turbine”, Energy Procedia, Vol. 137, pp. 38-57
• Rodrigues, J.M. and Guedes Soares, C. (2017), “Froude-Krylov forces from exact pressure integrations on adaptive panel meshes in a time domain partially nonlinear model for ship motions”, Ocean Engineering, . Vol. 139, pp. 169-183
• Rodrigues, J.M. and Guedes Soares, C. (2017), “Still water vertical loads during transient flooding of a tanker in full load condition with a probabilistic damage distribution”, Ocean Engineering, 2017, Vol. 129, pp. 480-494
• Saad-Eldeen, S., Garbatov, Y. and Guedes Soares, C. (2017), “Experimental compressive strength analyses of high tensile steel thin-walled stiffened panels with a large lightening opening”, Thin Walled Structures, Vol. 113, pp. 61-68
• Santos, J. and Sobral, J. (2017), “Optimisation of maintenance based on a dynamics simulation model (in Portuguese)”, Manutenção (APMI - Associacao Portuguesa De Manutencão Industrial), Vol. 133/134, pp. 8-10
• Santos, T.A. and Guedes Soares, C. (2017), “Development dynamics of the Portuguese range as a multi-port gateway system”, Journal of Transport Geography, Vol. 60, pp. 178-188
• Santos, T.A. and Guedes Soares, C. (2017), “Modeling transportation demand in short sea shipping”, Maritime Economics and Logistics, Vol. 19(4), pp. 695-722
• Santos, T.A. and Guedes Soares, C. (2017), “Methodology for ro-ro ship and fleet sizing with application to short sea shipping”, Maritime Policy and Management, Vol. 44(7), pp. 859-881
• Shi, X., Zhang. J. and Guedes Soares, C. (2017), “Experimental study on collapse of cracked stiffened plate with initial imperfections under compression”, Thin Walled Structures, 2017, Vol. 114, pp. 39-51
• Silva, S.A., Oliveira, M.J., Carvalho, H., Jacinto, C., Fialho, T. and Guedes Soares, C. (2017), “Organizational Practices for learning with work accidents throughout their information cycle”, Safety Science, Vol. 99, pp. 102-114
• Sobral, J. (2017), “Fire Safety Systems in Buildings-Problems and Concerns beyond the Project”, MOJ Civil Engineering, Vol. 2(5), pp. 00049
• Sobral, J. (2017), “The impact of innovation in maintenance programmes on medical equipment and devices” (In Portuguese), Tecnohospital (Revista de Engenharia e Gestão da Saúde), Vol. 80, pp. 14-17.
• Sutherland, L.S., Amado, C. and Guedes Soares, C. (2017), “Statistical experimental design techniques to investigate the strength of adhesively bonded T-joints”, Composite Structures, Vol. 159, pp. 445-454
• Sutherland, L.S., Sá, M.F., Correia, J.R., Guedes Soares, C., Gomes, A. and Silvestre, N. (2017), “Impact response of pedestrian bridge multicellular GFRP deck panels”, Composite Structures, Vol. 171, pp 473-485
• Valadas Monteiro, P., Salvador, R. and Guedes Soares, C. (2017), “A micro-cluster approach applied to the case of the nautical tourism sector of the Algarve region (Portugal)”, Tourism in Marine Environments, Vol. 12(2), pp. 105-124
• Varela, J.M. and Guedes Soares, C. (2017), “Geometry and visual realism of ship models for digital ship bridge simulators”, Journal of Engineering for the Maritime Environment, 2017, Vol. 231(1), pp. 329-341
• Vettor, R. and Guedes Soares, C. (2017) , “Characterisation of the expected wave conditions in the main European coastal traffic routes”, Ocean Engineering, Vol. 140, pp. 244-257
• Wang, S. and Guedes Soares, C. (2017), “Review of ship slamming loads and responses”, Journal Marine Science and Application, Vol. 16, pp. 427-445
• Wang, S. and Guedes Soares, C. (2017), “Hydroelastic analysis of a rectangular plate subjected to slamming loads”, Journal of Marine Science and Application, Vol. 16, pp. 405-416
• Wu, B., Yan, X.P., Wang, Y. and Guedes Soares, C. (2017), “An evidential reasoning-based CREAM to human reliability analysis in maritime accident process”, Risk Analysis: An International Journal, Vol. 37(10), pp. 1936-1957
• Wu, B., Yan, X.P., Wang, Y., Zhang, D. and Guedes Soares, C. (2017), “Three-Stage Decision-Making Model under Restricted Conditions for Emergency Response to Ships Not under Control”, Risk Analysis: An International Journal, Vol. 37(12), pp. 2455-2474
• Xu, M.C., Song, Z.J., Pan, J. and Guedes Soares, C. (2017), “Study on the influence of the initial deflection and load combination on the collapse behaviour of continuous stiffened panels”, International Journal of Steel Structures, Vol. 17(4), pp. 1427-1442
• Xu, M.C., Song, Z.J., Pan, J. and Guedes Soares, C. (2017), “Ultimate strength assessment of continuous stiffened panels under combined longitudinal compressive load and lateral pressure”, Ocean Engineering, Vol. 139, pp. 39-53
• Yue, JX., Damg, ZF. and Guedes Soares, C. (2017), “Prediction of Fatigue Crack Propagation in Bulb Stiffeners by Experimental and Numerical Methods”, International Journal of Fatigue, 2017, Vol. 99, pp. 101-110
• Zhang, HD., Ducrozet, G., Klein, M. and Guedes Soares C. (2017), “An experimental and numerical study on breather solutions for surface waves in the intermediate water depth”, Ocean Engineering, Vol. 133, pp. 262-270
• Zhang, HD., Sanina, E., Babanin, A. and Guedes Soares, C. (2017), “On the analysis of 2D nonlinear gravity waves with a fully nonlinear numerical model”, Wave Motion, Vol. 70, pp. 152-165
• Zhang, J.F., Santos, T.A., Guedes Soares, C. and Yan, X.P. (2017), “Sequential ship traffic scheduling model for restricted two-way waterway transportation”, Journal of Engineering for the Maritime Environment (Part M), Vol. 231(1), pp. 86-97
• Zhang, J.F., Teixeira, A.P., Guedes Soares, C. and Yan, X.P. (2017), “Probabilistic modelling of the drifting trajectory of an object under the effect of wind and current for maritime search and rescue”, Ocean Engineering, Vol. 129, pp. 253-264
• Zhang. J., Shi, X. and Guedes Soares, C. (2017), “Experimental analysis of residual ultimate strength of stiffened panels with pitting corrosion under compression”, Engineering Structures, Vol. 152, pp. 70-86
|
Articles in Books • Alizadeh, F. and Guedes Soares, C. (2017), “Numerical analysis of mixed-mode fracture toughness of glass/vinylester composite laminates”, Progress in the Analysis and Design of Marine Structures, Guedes Soares, C. & Garbatov Y. (Eds.), Taylor & Francis Group, London, UK, pp. 329-335
• Alizadeh, F., Garbatov, Y. and Guedes Soares, C. (2017), “Numerical investigation of pre-damaged composite plates subjected to compressive uniaxial load”, Progress in the Analysis and Design of Marine Structures, Guedes Soares, C. & Garbatov Y. (Eds.), Taylor & Francis Group, London, UK, pp. 841-848
• Alizadeh, F., Garbatov, Y. and Guedes Soares, C. (2017), “Numerical investigation of pre-damaged composite plates subjected to compressive uniaxial load”, Progress in the Analysis and Design of Marine Structures, Guedes Soares, C. & Garbatov Y. (Eds.), Taylor & Francis Group, London, UK, pp. 841-848
• Barbosa, A.A., Teixeira, A.P. and Guedes Soares, C. (2017), “Strength analysis of corroded pipelines subjected to internal pressure and bending moment”, Progress in the Analysis and Design of Marine Structures, Guedes Soares, C. & Garbatov Y. (Eds.), Taylor & Francis Group, London, UK, pp. 803-811
• Bharadwaj, U.R., Koch, T., Frank, D., Herrera, L., Randall, G., Volbeda, C., Garbatov, Y., Hirdaris, S., Tsouvalis, N., Carneros, A., Zhou, P. and Atanasova, I. (2017), “Ship Lifecycle Software Solutions (SHIPLYS) - an overview of the project, its first phase of development and challenges”, Maritime Transportation and Harvesting of Sea Resources, Guedes Soares, C. & Teixeira A.P. (Eds.), Taylor & Francis Group, London, UK, pp. 889-896
• Bhardwaj, U., Teixeira, A.P. and Guedes Soares, C. (2017), “Analysis of FPSO accident and incident data”, Progress in the Analysis and Design of Marine Structures, Guedes Soares, C. & Garbatov Y. (Eds.), Taylor & Francis Group, London, UK, pp. 773-782
• Chen, B.Q. and Guedes Soares, C. (2017), “Numerical investigation on a side-shell structure subjected to collision impact load”, Progress in the Analysis and Design of Marine Structures, Guedes Soares, C. & Garbatov Y. (Eds.), Taylor & Francis Group, London, UK, pp. 423-429
• Damyanliev, T., Georgiev, P. and Garbatov, Y. (2017), “Conceptual ship design framework for designing new commercial ships”, Progress in the Analysis and Design of Marine Structures, Guedes Soares, C. & Garbatov Y. (Eds.), Taylor & Francis Group, London, UK, pp. 183-191
• Dong, Y. and Guedes Soares, C. (2017), “Uncertainty analyses of local strain and fatigue crack initiation life of welded joints under plane strain condition”, Progress in the Analysis and Design of Marine Structures, Guedes Soares, C. & Garbatov Y. (Eds.), Taylor & Francis Group, London, UK, pp. 349-359
• Dong, Y., Garbatov, Y., and Guedes Soares, C. (2017), “Fatigue strength assessment of an annealed butt welded joint accounting for material inhomogeneity”, Progress in the Analysis and Design of Marine Structures, Guedes Soares, C. & Garbatov Y. (Eds.), Taylor & Francis Group, London, UK, pp. 337-347
• Farajkhah, V. and Guedes Soares, C. (2017), “Finite element study on the ultimate strength of aluminum plates joined by friction stir welding”, Progress in the Analysis and Design of Marine Structures, Guedes Soares, C. & Garbatov Y. (Eds.), Taylor & Francis Group, London, UK, pp. 609-615
• Garbatov, Y. and Georgiev, P. (2017), “Optimal design of stiffened plate subjected to combined stochastic loads”, Progress in the Analysis and Design of Marine Structures, Guedes Soares, C. & Garbatov Y. (Eds.), Taylor & Francis Group, London, UK, pp. 243-252
• Gordo, J. M. (2017), “Compressive strength of double-bottom under alternate hold loading condition”, Progress in the Analysis and Design of Marine Structures, Guedes Soares, C. & Garbatov Y. (Eds.), Taylor & Francis Group, London, UK, pp. 253-261
• Hashemzadeh, M., Garbatov, Y. and Guedes Soares, C. (2017), “Distortion and residual stress analysis of thin butt welded plates accounting for manufacturing imperfections”, Progress in the Analysis and Design of Marine Structures, Guedes Soares, C. & Garbatov Y. (Eds.), Taylor & Francis Group, London, UK, pp. 623-630
• Hinostroza, M.A., Xu, H.T. and Guedes Soares, C. (2017), “Experimental and numerical simulations of zig-zag manoeuvres of a self-running ship model”, Maritime Transportation and Harvesting of Sea Resources, Guedes Soares, C. & Teixeira A.P. (Eds.), Taylor & Francis Group, London, UK, pp. 563-570
• Kharghani, N., Garbatov, Y. and Guedes Soares, C. (2017), “Hotspot stress analysis of a composite T-joint accounting for geometric and surface roughness effects”, Progress in the Analysis and Design of Marine Structures, Guedes Soares, C. & Garbatov Y. (Eds.), Taylor & Francis Group, London, UK, pp. 849-858
• Li, S. S. and Guedes Soares, C. (2017), “A procedure to generate design load-time histories for fatigue strength assessment of offshore structures”, Progress in the Analysis and Design of Marine Structures, Guedes Soares, C. & Garbatov Y. (Eds.), Taylor & Francis Group, London, UK, pp. 13-20
• Lillemae-Avi, I., Remes, H., Dong, Y., Garbatov, Y., Quemener, Y., Eggert, L., Sheng, Q. and Yue, J. (2017), “Benchmark study on considering welding-induced distortion in structural stress analysis of thin-plate structures”, Progress in the Analysis and Design of Marine Structures, Guedes Soares, C. & Garbatov Y. (Eds.), Taylor & Francis Group, London, UK, pp. 387-394
• Patel, SD. and Guedes Soares, C. (2017), “Probability of failure of composite beams under high velocity impact”, Progress in the Analysis and Design of Marine Structures, Guedes Soares, C. & Garbatov Y. (Eds.), Taylor & Francis Group, London, UK, pp. 487-495
• Rajendran, S. and Guedes Soares, C. (2017), “Vertical wave loads acting on a cruise ship in head, oblique and following regular waves”, Progress in the Analysis and Design of Marine Structures, Guedes Soares, C. & Garbatov Y. (Eds.), Taylor & Francis Gro
• Rodrigues, J.M. and Guedes Soares, C. (2017), “Still water vertical bending moment in a flooding damaged ship”, Progress in the Analysis and Design of Marine Structures, Guedes Soares, C. & Garbatov Y. (Eds.), Taylor & Francis Group, London, UK, pp. 35-42
• Saad-Eldeen, S., Garbatov, Y. and Guedes Soares, C. (2017), “FE model calibration and validation of a tested plate with an opening under compressive load”, PProgress in the Analysis and Design of Marine Structures, Guedes Soares, C. & Garbatov Y. (Eds.), Taylor & Francis Group, London, UK, pp. 305-312
• Saad-Eldeen, S., Garbatov, Y. and Guedes Soares, C. (2017), “Strength enhancement of cracked swash bulkheads of jack-up spud-can”, Progress in the Analysis and Design of Marine Structures, Guedes Soares, C. & Garbatov Y. (Eds.), Taylor & Francis Group, London, UK, pp. 763-769
• Shi, X.H., Wang, PX. and Guedes Soares, C. (2017), “Dynamic response of ship side structure to the collision with ice sheets”, Progress in the Analysis and Design of Marine Structures, Guedes Soares, C. & Garbatov Y. (Eds.), Taylor & Francis Group, London, UK, pp. 713-720
• Wang, S. and Guedes Soares, C. (2017) , “Hydroelastic effects on slamming loads and dynamic response of flexible panels”, Progress in the Analysis and Design of Marine Structures, Guedes Soares, C. & Garbatov Y. (Eds.), Taylor & Francis Group, London, UK, pp. 59-67
• Yeter, B., Garbatov, Y. and Guedes Soares, C. (2017), “System reliability of a jacket offshore wind turbine subjected to fatigue”, Progress in the Analysis and Design of Marine Structures, Guedes Soares, C. & Garbatov Y. (Eds.), Taylor & Francis Group, London, UK, pp. 939-950
• Yin, QL., Guedes Soares, C. and Dong, S. (2017), “Characteristics of p-y curves for monopile offshore wind turbines on clay soil”, Progress in the Analysis and Design of Marine Structures, Guedes Soares, C. & Garbatov Y. (Eds.), Taylor & Francis Group, London, UK, pp. 905-912
• Zhang, X., AN, C., Duan, MG. and Guedes Soares, C. (2017), “Lateral buckling and post-buckling response based on a modified nonlinear pipe-soil interaction model”, Progress in the Analysis and Design of Marine Structures, Guedes Soares, C. & Garbatov Y. (Eds.), Taylor & Francis Group, London, UK, pp. 827-837
|
Articles in Conferences • 5.3.139a Wu, B., Wang, Y., Zong, L.K., Guedes Soares, C. and Yan, X.P. (2017), “Modelling the collision risk in the Yangtze River using Bayesian networks”, “Modelling the collision risk in the Yangtze River using Bayesian networks”, 4th International Conference on Transportation Information and Safety (ICTIS 2017), 8-10 August, Banff, Alberta, Canada, pp. 503-509
• Calvário, M., Gaspar, J.F., Kamarlouei, M. and Guedes Soares, C. (2017), “Optimization of Mechanical Design and Control Parameters of an Oil-Hydraulic Power Take-off System”, 12th European Wave and Tidal Energy Conference (EWTEC 2017), 27 August - 1 September, Cork, Ireland
• Corak, M., Parunov, J. and Guedes Soares, C. (2017), “Structural Reliability Assessment of an oil tanker accidentally grounded in the Adriatic Sea” , Proceedings of the ASME 2016 36th International Conference on Ocean, Offshore and Arctic Engineering (OMAE17), 25-30 June, Trondheim, Norway
• Diaz, H.M., Rodrigues, J.M. and Guedes Soares, C. (2017), “Evaluation of an offshore floating wind power project on the Galician coast”, Proceedings of the ASME 2016 36th International Conference on Ocean, Offshore and Arctic Engineering (OMAE17), 25-30 June, Trondheim, Norway
• Garbatov, Y. and Guedes Soares, C. (2017), “Spatial corrosion wastage modelling of steel plates subjected to marine environments”, Proceedings of the ASME 2016 36th International Conference on Ocean, Offshore and Arctic Engineering (OMAE17), 25-30 June, Trondheim, Norway
• Gonçalves, P., Sobral, J. and Ferreira, L. (2017), “Airworthiness Process Applied to the Portuguese Remotely Piloted Aircraft Systems”, Applied Vehicles Technology (AVT) Specialists’ Meeting AVT-273/RSM-048, May 2017, Vilnius, Lithuania
• Li, C.F., Fu, P., Ren, H.L., Xu, W.J. and Guedes Soares, C. (2017), “Ultimate bearing capacity assessment of hull girder with Asymmetric cross-section”, Proceedings of the ASME 2016 36th International Conference on Ocean, Offshore and Arctic Engineering (OMAE17), 25-30 June, Trondheim, Norway
• Osborne, A.R. and Ponce de Leon, S. (2017), “Properties of rogue waves and the shape of the ocean wave power spectrum”, Proceedings of the ASME 2016 36th International Conference on Ocean, Offshore and Arctic Engineering (OMAE17), 25-30 June, Trondheim, Norway
• Palencia, O.G., Teixeira, A.P. and Guedes Soares, C. (2017), “Modelling of deterioration processes in ship structures through Dynamic Bayesian Networks”, 12th International Conference on Structural Safety & Reliability (ICOSSAR 2017), 6-10 August, TU Wien, Vienna, Austria, pp. 1936-1946
• Palencia, O.G., Teixeira, A.P. and Guedes Soares, C. (2017) , “Safety of pipelines subjected to deterioration processes modelled through Dynamic Bayesian Networks”, Proceedings of the ASME 2016 36th International Conference on Ocean, Offshore and Arctic Engineering (OMAE17), 25-30 June, Trondheim, Norway
• Patel, SD. and Guedes Soares, C. (2017), “System Probability of Failure and Sensitivity Analyses of Composite Plates under Low Velocity Impact”, Composite Structures, Vol. 180, pp. 1022-1031
• Pedro, F., Hinostroza, M.A., Ramos, A., Pinheiro, L., Santos, J.A. and Fortes, C.J.E.M. (2017), “Experimental characterization of ship motions induced by passing ships”, International Short Course Conference on Applied Coastal Research (SCACR2017), 3-6 October, Santander, Spain
• Pedro, F., Pinheiro, L., Ramos, A., Hinostroza, M.A., Santos, J.A. and Fortes, C.J.E.M. (2017), “Experimental characterization of the motions of a moored vessel subjected to ocean and ship waves” (In Portuguese), Simpósio de Hidráulica e Recursos Hídricos dos Países de Língua Portuguesa (13º Silusba), 13-15 September, Porto, Portugal
• Pedro, F.G.L., Pinheiro, L.V., Santos, J.A., Fortes, C.J.E.M. and Hinostroza, M.A. (2017), “Physical and numerical modelling of the hydrodynamic interaction between two ships”, 9as Jornadas Portuguesas de Engenharia Costeira e Portugal, 23-24 November, Lisboa, Portugal
• Rajendran, S. and Guedes Soares, C. (2017), “Numerical investigation of parametric rolling of a container ship in regular and irregular waves”, Proceedings of the ASME 2016 36th International Conference on Ocean, Offshore and Arctic Engineering (OMAE17), 25-30 June, Trondheim, Norway
• Rodrigues, J.M. and Guedes Soares, C. (2017), “Ship vertical loads from using an adaptive mesh pressure integration technique for Froude-Krylov forces calculation”, Proceedings of the ASME 2016 36th International Conference on Ocean, Offshore and Arctic Engineering (OMAE17), 25-30 June, Trondheim, Norway
• Sobral, J. and Guedes Soares, C. (2017), “Physical safety barriers behaviour based on RAM analysis using DEMATEL method”, 27th European Safety and Reliability Conference (ESREL 2017), 18-22 June, Portoroz, Slovenia
• Sobral, J., Teixeira, D., Morais, H. and Neves, M. (2017), “Methodology to Assess Medical Processes based on a Failure Modes and Effects Analysis (FMEA)”, 5th ENBENG Portuguese Bioengineering Meeting, February 2017, Coimbra, Portugal
• Teixeira, A.P., Palencia, O.G. and Guedes Soares, C. (2017), “Reliability analysis of corroded pipelines under external pressure”, Proceedings of the ASME 2016 36th International Conference on Ocean, Offshore and Arctic Engineering (OMAE17), 25-30 June, Trondheim, Norway
• Yeter, B., Garbatov, Y. and Guedes Soares, C. (2017), “Risk-based multi-objective optimisation of a monopile offshore wind turbine support structure”, Proceedings of the ASME 2016 36th International Conference on Ocean, Offshore and Arctic Engineering (OMAE17), 25-30 June, Trondheim, Norway
|
For information about all CENTEC publications you can download: Download the Complete List of CENTEC Publications
|