Articles in Journals
 • Dinis, D., Teixeira, A.P. and Guedes Soares, C. (2020), “Probabilistic Approach for Characterising the Static Risk of Ships Using Bayesian Networks”, Reliability Engineering and System Safety, Vol. 203, pp. 107073 (20 pages)

 • Zhang, Yi., Wei, K., Shen, ZH., Bai, X., Lu, XZ. and Guedes Soares, C. (2020), “Economic Impact of Typhoon Induced Wind Disasters to Port Operations: A Case Study of Ports in China”, International Journal of Disaster Risk Reduction, Vol. 50:, pp. 101719 (14 pages)

 • Zhang, Yi., Wei, K., Shen, ZH., Bai, X., Lu, XZ. and Guedes Soares, C. (2020), “Economic Impact of Typhoon Induced Wind Disasters to Port Operations: A Case Study of Ports in China”, International Journal of Disaster Risk Reduction, Vol. 50:, pp. 101719 (14 pages)

 • Patriarca, R., Di Gravio, G., Woltjer, R., Costantino, F., Praetoriusc, G., Ferreira, P. and Hollnagel, E. (2020), “Framing the FRAM: A literature review on the functional resonance analysis method”, Safety Science, Vol. 129, pp. 104827

 • Kabir, S., Geok, T.K., Kumar, M., Yazdi, M. and Hossain, F. (2020), “A Method for Temporal Fault Tree Analysis Using Intuitionistic Fuzzy Set and Expert Elicitation”, IEEE Access, Vol. 8, pp. 980-996

 • Yazdi, M., Nedjatib, A., Zarei, E. and Abbassi, R. (2020), “A reliable risk analysis approach using an extension of best-worst method based on democratic-autocratic decision-making style”, Journal of Cleaner Production, Vol. 256, pp. 120418

 • Yang, Zh., Yang, Za. and Teixeira, A.P. (2020), “Comparative analysis of the impact of new inspection regime on port state control inspection”, Transport Policy, Vol. 92, pp. 65-80

 • Yang, Zh., Yang, Za. and Teixeira, A.P. (2020), “Comparative analysis of the impact of new inspection regime on port state control inspection”, Transport Policy, Vol. 92, pp. 65-80

 • Chujutalli, J.H., Estefen. S.F. and Guedes Soares, C. (2020), “Indentation Parameters Influence on the Ultimate Strength of Panels for Different Stiffeners”, Journal of Constructional Steel Research, Vol. 170, pp. 106097

 • Li, MZ., Guedes Soares, C. and Yan, RJ. (2020), “A novel shear deformation theory for static analysis of functionally graded plates”, Composite Structures, Vol. 250, pp. 112559 (12 pages)

 • Yeter, B., Garbatov, Y. and Guedes Soares, C. (2020), “Risk-based maintenance planning of offshore wind turbine farms”, Reliability Engineering and System Safety, Vol. 202, pp. 107062 (13 pages)

 • Kharghani, N. and Guedes Soares, C. (2020), “Analysis of composite laminates containing through-the-width and embedded delamination under bending using layerwise HSDT”, European Journal of Mechanics / A Solids, Vol. 82, pp. 104003 (Pages 19)

 • Garbatov, Y. (2020), “Special Issue: Carlos Guedes Soares Honoring Symposium”, Journal of Offshore Mechanics and Arctic Engineering, Vol. 142, pp. 030301

 • Jafaryeganeh, H. and Guedes Soares, C. (2020), “A technique of panels cutting for modification of hull geometry hydrodynamic models”, International Journal of Maritime Engineering, Vol. 162(Part A2), pp. A219-A230

 • Tadros, M., Ventura, M. and Guedes Soares, C. (2020), “A nonlinear optimization tool to simulate a marine propulsion system for ship conceptual design”, Ocean Engineering, Vol. 210, pp. 107417 (15 pages)

 • Wang, QJ., Dai, H-N., Wang, Q., Shukla, M.K., Zhang, W. and Guedes Soares, C. (2020), “On Connectivity of UAV-Assisted Data Acquisition for Underwater Internet of Things”, IEEE Xplore, Vol. 7(6), pp. 5371-5385

 • Xiang, G. and Guedes Soares, C. (2020), “Improved Dynamical Modelling of Freely Falling Underwater Cylinders Based on CFD”, Ocean Engineering, Vol. 211, pp. 107538 (11 pages)

 • Diaz, H.M. and Guedes Soares, C. (2020), “Review of the current status, technology and future trends of offshore wind farms”, Ocean Engineering, Vol. 209, pp. 107381

 • Vitali, N., Prpić-Oršić, J. and Guedes Soares, C. (2020), “Coupling voyage and weather data to estimate speed loss of container ships in realistic conditions”, Ocean Engineering, Vol. 210, pp. 106758

 • Diaz, H.M., Rodrigues, J.M. and Guedes Soares, C. (2020), “Preliminary assessment of a tidal test site on the Minho estuary”, Renewable Energy, Vol. 158, 642-655

 • Xu, S., Wang, S. and Guedes Soares, C. (2020), “Experimental investigation on hybrid mooring systems for wave energy converters”, Renewable Energy, Vol. 158, pp. 130-153

 • Garcia, S., Trueba, A., Boullosa-Falces, D., Islam, H. and Guedes Soares, C. (2020), “Predicting ship frictional resistance due to biofouling using Reynolds-averaged Navier-Stokes simulations”, Applied Ocean Research, Vol. 101, pp. 102203

 • Vettor, R. and Guedes Soares, C. (2020), “A Global View on Bimodal Wave Spectra and Crossing Seas from ERA-interim”, Ocean Engineering, Vol. 210, pp. 107439 (13 pages)

 • Vettor, R. and Guedes Soares, C. (2020), “A Global View on Bimodal Wave Spectra and Crossing Seas from ERA-interim”, Ocean Engineering, Vol. 210, pp. 107439 (13 pages)

 • Costa, T.C., Pereira, L.T., Marta-Almeida, M. and Guedes Soares, C. (2020), “Mapping of currents off the northwestern Iberian coast with the Regional Ocean Modelling System”, Journal of Operational Oceanography, Vol. 13(2), pp. 71-83

 • Lucas, C., Muraleedharan, G. and Guedes Soares, C. (2020), “Assessment of extreme waves in the North Atlantic Ocean by regional frequency analysis”, Applied Ocean Research, Vol. 100, pp. 102165

 • Uzunoglu, E. and Guedes Soares, C. (2020), “Hydrodynamic design of a free-float capable tension leg platform for a 10 MW wind turbine”, Ocean Engineering, Vol. 197, pp. 106888-1 - 106888-17.

 • Xu, H.T., Fossen, T.I. and Guedes Soares, C. (2020), “Uniformly semiglobally exponentially stability of vector field guidance law and autopilot for path-following”, European Journal of Control, Vol. 53, pp. 88-97

 • Ponce de Leon, S. and Osborne, A.R. (2020), “Role of Nonlinear Four-Wave Interactions Source Term on the Spectral Shape”, Journal of Marine Science and Engineering, Vol. 8, pp. 251-1 - 251-16

 • Campos, R.M., Alves, J.H.G.M., Penny, S.G. and Krasnopolsky, V. (2020), “Global assessments of the NCEP Ensemble Forecast System using altimeter data”, Ocean Dynamics, Vol. 70, pp. 405–419

 • Campos, R.M., Krasnopolsky, V., Alves, J.H.G.M. and Penny, S.G. (2020), “Improving NCEP’s global-scale wave ensemble averages using neural networks”, Ocean Modelling, Vol. 149, pp. 101617-1 - 101617-12

 • Xiang, G., Wang, S. and Guedes Soares, C. (2020), “Study on the Motion of a Freely Falling Horizontal Cylinder into Water using OpenFOAM”, Ocean Engineering, Vol. 196, pp. 106811-1 - 106811-13

 • Vettor, R., Szlapczynska, J., Szlapczynski, R., Tycholiz, W. and Guedes Soares, C. (2020), “Towards improving optimised ship weather routing”, Polish Maritime Research Journal, Vol. 27, pp. 60-69

 • Xu, S. and Guedes Soares, C. (2020), “Dynamics of an ultra-deepwater mooring line with embedded chain segment”, Marine Structures, Vol. 72, pp. 102747-1 - 102747-27

 • Tadros, M., Ventura, M. and Guedes Soares, C. (2020), “Data driven in-cylinder pressure diagram based optimization procedure”, Journal of Marine Science and Application, Vol. 8, pp. 294-1 - 294-17

 • Moreira, L. and Guedes Soares, C. (2020), “Neural Network Model for Estimation of Hull Bending Moment and Shear Force on Ships in Waves”, Ocean Engineering, Vol. 206, pp. 107347-1 - 107347-9

 • Datta, R. and Guedes Soares, C. (2020), “Analysis of the hydroelastic effect on a container vessel using coupled BEM-FEM method in the time domain”, Ships & Offshore Structures, Vol. 15(4), pp. 393-402

 • Jafaryeganeh, H., Ventura, M. and Guedes Soares, C. (2020), “Application of multi-criteria decision making methods for selection of ship internal layout design from a Pareto optimal set”, Ocean Engineering, Vol. 202, pp. 107151-1 - 107151-14

 • Wu, B., Tian, H.B., Yan, X.P. and Guedes Soares, C. (2020) , “A probabilistic consequence estimation model for collision accidents in the downstream of Yangtze River using Bayesian Networks”, Journal of Risk and Reliability, Vol. 234(2), pp. 422-436

 • Jiang, F.Y., Dong, S., Zhao, YL. and Guedes Soares, C. (2020), “Experimental and numerical study of submarine pipeline response to hooking loads”, Ocean Engineering, Vol. 207, pp. 107392-1 - 107392-16

 • Castro-Santos, L., Silva, D., Bento, A.R., Salvacao, N. and Guedes Soares, C. (2020), “Economic feasibility of floating offshore wind farms in Portugal”, Ocean Engineering, Vol. 207, pp. 107393-1 - 107393-7

 • Xu, H.T., Hassani, V. and Guedes Soares, C. (2020), “Comparing generic and vectorial nonlinear manoeuvring models and parameter estimation using optimal truncated least square support vector machine”, Apllied Ocean Research, Vol. 97, pp. 1020

 • Guo, Y.C., Mohapatra, S.C. and Guedes Soares, C. (2020), “Review of developments in porous membranes and net-type structures for breakwaters and fish cages”, Ocean Engineering, Vol. 200, pp. 107027-1 - 107027-24

 • Ren.H.L., Xu, C., Zhou, XQ., Sutulo, S., Guedes Soares, C. and Li, C.F. (2020), “Analysis of numerical errors of the Hess Smith Panel Method with asymmetric meshes”, Journal of Offshore Mechanics and Arctic Engineering, Vol. 142, pp. 021901-1 - 021901-10

 • Xu, S. and Guedes Soares, C. (2020), “Experimental investigation on short-term fatigue damage of slack and hybrid mooring for wave energy converters”, Ocean Engineering, Vol. 195, pp. 106618-1 - 106618-16

 • Guo, Y.C., Mohapatra, S.C. and Guedes Soares, C. (2020), “Wave energy dissipation of a submerged horizontal flexible porous membrane under oblique wave interaction”, Applied Ocean Research, Vol. 94, pp. 101948-1 - 101948-16

 • Vijay, K.G., Karmakar, D. and Guedes Soares, C. (2020), “Long-term response analysis of TLP-type offshore floating wind turbine”, ISH Journal of Hydraulic Engineering, Vol. 26(1), pp. 31-43

 • Xu, H.T. and Guedes Soares, C. (2020), “Manoeuvring Modelling of a Containership in Shallow Water based on Optimal Truncated Nonlinear Kernel-based Least Square Support Vector Machine and Quantum-Inspired Evolutionary Algorithm”, Ocean Engineering, Vol. 195, pp. 106676-1 - 106676-15

 • Wang, Xin and Guedes Soares, C. (2020), “Direct Adaptive Neural Network Control for Ship Manoeuvring Modelling Group Model based Uncertain Nonlinear Systems in Non-affine Pure-feedback Form”, IEEE Access, Vol. 8, pp. 3272-3284

 • Weng, YP., Wang, Nn. and Guedes Soares, C. (2020), “Data-driven sideslip observer-based adaptive sliding-mode path-following control of underactuated marine vessels”, Ocean Engineering, Vol. 197, pp. 106910-1 - 106910-9

 • Praveen, K.M., Karmakar, D. and Guedes Soares, C. (2020), “Wave Interaction With Floating Elastic Plate Based on the Timoshenko–Mindlin Plate Theory”, Journal of Offshore Mechanics and Arctic Engineering, Vol. 142, pp. 011601-1 - 011601-15

 • Raed, K., Teixeira, A.P. and Guedes Soares, C. (2020), “Uncertainty assessment for the extreme hydrodynamic responses of a wind turbine semi-submersible platform using different environmental contour approaches”, Ocean Engineering, Vol. 195, pp. 106-719-1 - 106-719-15

 • Xiang, G. and Guedes Soares, C. (2020), “Incorporating irregular nonlinear waves in simulation of dropped cylindrical objects”, Journal of Engineering for the Maritime Environment, Vol. 234(1), pp. 272-283

 • Xu, S., Ji, C. and Guedes Soares, C. (2020), “Experimental study on effect of side-mooring lines on dynamics of a catenary moored semi-submersible system”, Journal of Engineering for the Maritime Environment (Part M), Vol. 234(1), pp. 127-142

 • Xiang, G., Wang, S. and Guedes Soares, C. (2020), “Study on the Motion of a Freely Falling Horizontal Cylinder into Water using OpenFOAM”, Ocean Engineering, Vol. 196, pp. 106811-1 - 106811-13

 • Xiang, G., Wang, S. and Guedes Soares, C. (2020), “Study on the Motion of a Freely Falling Horizontal Cylinder into Water using OpenFOAM”, Ocean Engineering, Vol. 196, pp. 106811-1 - 106811-13

 • Wang, Zi., Guedes Soares, C. and Zou, Z.J. (2020), “Optimal design of excitation signal for identification of nonlinear ship manoeuvring model”, Ocean Engineering, Vol. 196, pp. 106778-1 - 106778-10

 • Wang, Yi., Wu, W., Wang, S. and Guedes Soares, C. (2020), “Slam-induced loads of a three-dimensional bow with various pitch angles”, Journal of Offshore Mechanics and Arctic Engineering, Vol. 142, pp. 014502-1 - 014502-7

 • Xu, H.T., Hinostroza, M.A., Wang, Zi. and Guedes Soares, C. (2020), “Experimental investigation of shallow water effect on vessel steering model using system identification method”, Ocean Engineering, Vol. 199, pp. 106940-1 - 106940-16

 • Xu, H.T., Hassani, V. and Guedes Soares, C. (2020), “Truncated least square support vector machine for parameter estimation of a nonlinear manoeuvring model based on PMM tests”, Applied Ocean Research, Vol. 97, pp. 102076-1 - 102076-15

 • Gonçalves, M., Martinho, P. and Guedes Soares, C. (2020), “Wave energy assessment based on a 33-year hindcast for the Canary Islands”, Renewable Energy, Vol. 152, pp. 259-269

 • Yeter, B., Garbatov, Y. and Guedes Soares, C. (2020), “Strength assessment of jacket offshore wind turbine support structure accounting for rupture”, Journal of Offshore Mechanics and Arctic Engineering, Vol. 142, pp. 011902-1 - 011902-7

 • Kharghani, N. and Guedes Soares, C. (2020) , “Experimental, numerical and analytical study of buckling of rectangular composite laminates”, European Journal of Mechanics / A Solids, Vol. 79, pp. 103869-1 - 103869-15

 • Saad-Eldeen, S., Garbatov, Y. and Guedes Soares, C. (2020), “Experimental failure assessment of high tensile stiffened plates with openings”, Engineering Structures, Vol. 206, pp. 110121-1 - 110121-13

 • 3.1.294 Parunov, J., Corak, M., Guedes Soares, C., Jafaryeganeh, H., Kalske, S., Lee, Y.W., Liu, S., Papanikolaou, A., Prentice, D., Prpić-Oršić, J., Ruponen, P. and Vitali, N. (2020), “Benchmark study and uncertainty assessment of numerical predictions of global wave loads on damaged ships”, Ocean Engineering, Vol. 197, pp. 106876-1 - 106876-12

 • Doan, V.T., Liu, B., Garbatov, Y., Wu, WG. and Guedes Soares, C. (2020), “Strength assessment of aluminium and steel stiffened panels with openings on longitudinal girders”, Ocean Engineering, Vol. 200, pp. 107047-1 - 107047-16

 • Tekgoz, M., Almany, N. and Garbatov, Y. (2020), “Quasi-static direct strength assessment of offshore multipurpose support vessel in head sea”, Sustainable Development and Innovations in Marine Technologies, Georgiev, P. & Guedes Soares C. (Eds.), Taylor & Francis Group, London, pp. 415-422

 • Xu, S., Teixeira, A.P. and Guedes Soares, C. (2020), “Conditional Reliability Analysis of a Semi-Submersible Mooring Line with Random Hydrodynamic Coefficients”, Journal of Offshore Mechanics and Arctic Engineering, Vol. 142, pp. 011606-1 - 011606-9

 • Xu, S., Teixeira, A.P. and Guedes Soares, C. (2020), “Conditional Reliability Analysis of a Semi-Submersible Mooring Line with Random Hydrodynamic Coefficients”, Journal of Offshore Mechanics and Arctic Engineering, Vol. 142, pp. 011606-1 - 011606-9

 • Yu, Q., Liu, KH., Teixeira, A.P. and Guedes Soares, C. (2020), “Assessment of the influence of offshore wind farms on ship traffic flow based on AIS data”, Journal of Navigation, Vol. 73, pp. 131-148

 • Dong, Y., Teixeira, A.P. and Guedes Soares, C. (2020), , “Application of adaptive surrogate models in time-variant fatigue reliability assessment of welded joints with surface cracks”, Reliability Engineering and System Safety, Vol. 195, pp. 106730-1 - 106730-14

 • Yazdi, M. (2020), “A perceptual computing-based method to prioritizeintervention actions in the probabilistic risk assessment techniques”, Quality and Reliability Engineering International, Vol. 36, pp. 187-213

 • Zhao, Y.L., Dong, S., Jiang, F.Y. and Guedes Soares, C. (2020), “System reliability analysis of an offshore jacket platform”, Journal of Ocean University China, Vol. 19(1), pp. 47-59

 • Castro-Santos, L., Bento, A.R., Silva, D., Salvação, N. and Guedes Soares, C. (2020), “Economic feasibility of floating offshore wind farms in the north of Spain”, Journal of Marine Science and Engineering, Vol. 8(1), pp. 58-76

 • Rong, H., Teixeira, A.P. and Guedes Soares, C. (2020), “Data mining approach to shipping route characterization and anomaly detection based on AIS data”, Ocean Engineering, Vol. 198, pp. 106936-1 - 106936-12

 • Castro-Santos, L., Bento, A.R. and Guedes Soares, C. (2020), “The economic feasibility of floating offshore wave energy farms in the North of Spain”, Energies, Vol. 13, pp. 806-1 - 806-19

 • Yazdi, M., Kabir, S. and Walker, M. (2019), “Uncertainty handling in fault tree based risk assessment: State of theart and future perspectives”, Process Safety and Environmental Protection, Vol. 131, pp. 89-104

 • Kang, J.C., Sun, L.P. and Guedes Soares, C. (2019), "Fault Tree Analysis of Floating Offshore Wind Turbines", Renewable Energy, Vol. 133, pp. 1455-1467

 • Yeter, B., Garbatov, Y. and Guedes Soares, C. (2019), “Ultimate strength assessment of jacket offshore wind turbine support structures subjected to progressive bending loading”, Ships & Offshore Structures, Vol. 14(2), pp. 165-175

 • Yazdi, M. (2019), “Footprint of knowledge acquisition improvement in failure diagnosis analysis”, Quality and Reliability Engineering International, Vol. 35, pp. 405–422

 • Yazdi, M. (2019), “Acquiring and Sharing Tacit Knowledge in Failure Diagnosis Analysis Using Intuitionistic and Pythagorean Assessments”, Journal of Failure Analysis and Prevention, Vol. 19, pp. 369–386

 • Yazdi, M. (2019), “Improving failure mode and effect analysis (FMEA) with consideration of uncertainty handling as an interactive approach”, International Journal on Interactive Design and Manufacturing, Vol. 13(2), pp. 441–458

 • Yazdi, M. (2019), “Introducing a heuristic approach to enhance the reliability of system safety assessment”, Quality and Reliability Engineering International, Vol. 35, pp. 2612–2638

 • Garbatov, Y., Almany, N. and Tekgoz, M. (2019), “Operational behaviour of an offshore multipurpose support vessel in the Eastern Mediterranean Sea”, International Journal of Maritime Engineering, Vol. 161(Part A3), pp. A-303 - A-311

 • Mendes, J.P. and Aleluia, M. (2019), “Aging Effects in Public Policy Making”, System Dynamics Review, Vol. 35(3), pp. 232-254

 • Gaspar, J.F., Fontul, M., Henriques, E. and Silva, A. (2019), “Push button design requirements and relations to button architecture elements”, International Journal of Industrial Ergonomics, Vol. 70, pp. 92-106.

 • Chen, B.Q. and Guedes Soares, C. (2019), “Numerical investigation on weld-induced imperfections in aluminium ship plates”, Journal of Offshore Mechanics and Arctic Engineering, Vol. 141(6), pp. 061605-1 - 061605-7

 • Garbatov, Y. and Guedes Soares, C. (2019), “Spatial corrosion wastage modelling of steel plates exposed to marine environments”, Journal of Offshore Mechanics and Arctic Engineering, Vol. 141(3), pp. 031602-1 - 031602-6

 • Jiang, F.Y., Dong, S., Zhao, Y.L., Xie, Z. and Guedes Soares, C. (2019), “Investigation on the deformation response of submarine pipelines subjected to impact loads by dropped objects”, Ocean Engineering, Vol. 194, pp. 106638-1 - 106638-18

 • Jafaryeganeh, H., Ventura, M. and Guedes Soares, C. (2019), “Multi-objective optimization of internal compartment layout of oil tankers”, Journal of Ship Production and Design, Vol. 35(4), pp. 374-385

 • Jafaryeganeh, H., Ventura, M. and Guedes Soares, C. (2019) , “Multi-objective optimization of internal compartment layout of oil tankers”, Journal of Ship Production and Design, Vol. 35(4), pp. 374-385.

 • Santos, J.A., Pinheiro, L.V., Abdelwahab, H.S., Fortes, C.J.E.M., Pedro, F.G.L., Capitão, R.P., Hinostroza, M.A. and Guedes Soares, C. (2019), “Physical modelling of motions and forces on a moored ship at the Leixões port”, Defect and Diffusion Forum, Vol. 396, pp. 60-69.

 • Xu, H.T., Rong, H. and Guedes Soares, C. (2019), “Use of AIS data for guidance and control of path-following autonomous vessels”, Ocean Engineering, Vol. 194, pp. 106635-1 - 106635-19

 • Xu, H.T., Rong, H. and Guedes Soares, C. (2019), “Use of AIS data for guidance and control of path-following autonomous vessels”, Ocean Engineering, Vol. 194, pp. 106635-1 - 106635-19

 • Dinis, D., Barbosa-Povoa, A. and Teixeira, A.P. (2019), “A supporting framework for maintenance capacity planning and scheduling: Development and application in the aircraft MRO industry”, International Journal of Production Economics, Vol. 218, pp. 1-15

 • Dinis, D., Barbosa-Povoa, A. and Teixeira, A.P. (2019), “Valuing data in aircraft maintenance through big data analytics: A probabilistic approach for capacity planning using Bayesian networks”, Computers and Industrial Engineering, Vol. 128, pp. 920-936

 • Silveira, P.A.M., Teixeira, A.P. and Guedes Soares, C. (2019), “AIS based shipping routes using the Dijkstra algorithm”, International Journal on Marine Navigation and Safety of Sea Transportation (TRANSNAV), Vol. 13(3), pp. 565-571

 • Woloszyk, K. and Garbatov, Y. (2019), “Structural Reliability Assessment of Corroded Tanker Ship Based on Experimentally Estimated Ultimate Strength”, Polish Maritime Research, Vol. 26(2), pp. 47-54

 • Garrido, M., Teixeira, R., Correia, J.R. and Sutherland, L.S. (2019), “Quasi-static indentation and impact in glass-fibre reinforced polymer sandwich panels for civil and ocean engineering applications”, Sandwich Structures and Materials, Vol. 0(0), pp. 1-28

 • Islam, H. and Guedes Soares, C. (2019), "Uncertainty analysis in ship resistance prediction using OpenFOAM", Ocean Engineering, Vol. 191, pp. 105805-1 - 105805-16



Articles in Books
 • Santos, T.A. and Guedes Soares, C. (2020), “Short sea shippking in the age of information and communications technology”, Short Sea Shipping in the Age of Sustainable Development and Information Technology, Santos, T.A. & Guedes Soares C. (Eds.), Routledge, Taylor and Francis Group, London, UK , pp. 277-296

 • Santos, T.A., Escabelado, J., Botter, R.C. and Guedes Soares, C. (2020), “Simulating Ro-Ro operations in the context of supply chains”, Short Sea Shipping in the Age of Sustainable Development and Information Technology, Santos, T.A. & Guedes Soares C. (Eds.), Routledge, Taylor and Francis Group, London, UK , pp. 116-140

 • Santos, T.A., Ramalho, M.M. and Guedes Soares, C. (2020), “Sustainbility in short sea shipping-based intermodal transport chains”, 5.2.1 Short Sea Shipping in the Age of Sustainable Development and Information Technology, Santos, T.A. & Guedes Soares C. (Eds.), Routledge, Taylor and Francis Group, London, UK , pp. 89-115.

 • Santos, T.A. and Guedes Soares, C. (2020), “Ro-Ro ship and fleet sizing in intermodal transportation”, Short Sea Shipping in the Age of Sustainable Development and Information Technology, Santos, T.A. & Guedes Soares C. (Eds.), Routledge, Taylor and Francis Group, London, UK , pp. 61-88

 • Ventura, M., Santos, T.A. and Guedes Soares, C. (2020), “Ro-Ro ships and dedicated short sea shipping terminals”, Short Sea Shipping in the Age of Sustainable Development and Information Technology, Santos, T.A. & Guedes Soares C. (Eds.), Routledge, Taylor and Francis Group, London, UK , pp. 22-57

 • Santos, T.A. and Guedes Soares, C. (2020), “Assessment of transportation demand on alternative short-sea shipping services considering external costs”, Maritime Supply Chains, Vanelslander, T. & Sys, C. (Eds.), Elsevier, pp. 13-45

 • Hinostroza, M.A., Xu, H.T. and Guedes Soares, C. (2020), “Manoeuvring test for a self-running ship model in various water depth conditions”, Sustainable Development and Innovations in Marine Technologies, Georgiev, P. & Guedes Soares C. (Eds.), Taylor and Francis Group, London, pp. 187-196

 • Hinostroza, M.A. and Guedes Soares, C. (2020), “Uncertainty analysis of parametric wave spectrum estimation from ship motions”, Sustainable Development and Innovations in Marine Technologies, Georgiev, P. & Guedes Soares C. (Eds.), Taylor and Francis Group, London, pp. 70-78

 • Krata, P., Vettor, R. and Guedes Soares, C. (2020), “Bayesian approach to ship speed prediction based on operational data”, Developments in the Collision and Grounding of Ships and Offshore Structures, C. Guedes Soares (Ed.), Taylor and Francis Group, London, pp. 384-390

 • Silva, N., Wang, S. and Guedes Soares, C. (2020), “ALE and Finite Element Investigation of Water Impact on Composite Panels”, Developments in the Collision and Grounding of Ships and Offshore Structures, C. Guedes Soares (Ed.), Taylor and Francis Group, London, pp. 227-236

 • Tadros, M., Ventura, M. and Guedes Soares, C. (2020), “Optimum design of a container ship’s propeller from Wageningen B-series at the minimum BSFC”, Sustainable Development and Innovations in Marine Technologies, Georgiev, P. & Guedes Soares C. (Eds.), Taylor and Francis Group, London, pp. 269-274

 • Tadros, M., Ventura, M. and Guedes Soares, C. (2020), “Simulation of the performance of marine genset based on double-Wiebe function”, Sustainable Development and Innovations in Marine Technologies, Georgiev, P. & Guedes Soares C. (Eds.), Taylor and Francis Group, London, pp. 292-299

 • Tadros, M., Ventura, M., Guedes Soares, C. and Lampreia, S. (2020), “Predicting the performance of a sequentially turbocharged marine diesel engine using ANFIS”, Sustainable Development and Innovations in Marine Technologies, Georgiev, P. & Guedes Soares C. (Eds.), Taylor and Francis Group, London, pp. 300-305

 • Woloszyk, K. and Garbatov, Y. (2020), “FE analysis of support-specimen interaction of compressive experimental test”, Sustainable Development and Innovations in Marine Technologies, Georgiev, P. & Guedes Soares C. (Eds.), Taylor & Francis Group, London, pp. 423-428

 • Woloszyk, K. and Garbatov, Y. (2020), “Uncertainty assessment of ultimate strength of corroded stiffened plates subjected to maintenance”, Sustainable Development and Innovations in Marine Technologies, Georgiev, P. & Guedes Soares C. (Eds.), Taylor and Francis Group, London, pp. 429-436

 • Hashemzadeh, M., Garbatov, Y. and Guedes Soares, C. (2020), “Numerical Stress-Strain Analysis of Butt-Welded Plates during the Welding Process”, Developments in the Collision and Grounding of Ships and Offshore Structures, C. Guedes Soares (Ed.), Taylor and Francis Group, London, pp. 157-162

 • Liu, B., Wang, G., Chen, L., Liao, XT. and Guedes Soares, C. (2020), “Numerical analysis of ship collisions accounting for bow and side deformation interaction”, Developments in the Collision and Grounding of Ships and Offshore Structures, C. Guedes Soares (Ed.), Taylor and Francis Group, London, pp. 57-64

 • Tekgoz, M., Garbatov, Y. and Guedes Soares, C. (2020), “Ultimate strength assessment of square plate subjected to uni-axial dynamic load”, Developments in the Collision and Grounding of Ships and Offshore Structures, C. Guedes Soares (Ed.), Taylor & Francis Group, London, pp. 189-196

 • Liu, B., Dong, A., Chen, L., Liu, K. and Guedes Soares, C. (2020), “Analysis of the resistance to penetration of aluminium-alloy plates”, Developments in the Collision and Grounding of Ships and Offshore Structures, C. Guedes Soares (Ed.), Taylor and Francis Group, London, pp. 27-33

 • Liu, B., Dong, A., Chen, L., Liu, K. and Guedes Soares, C. (2020), “Analysis of the resistance to penetration of aluminium-alloy plates”, Developments in the Collision and Grounding of Ships and Offshore Structures, C. Guedes Soares (Ed.), Taylor and Francis Group, London, pp. 27-33

 • Liu, B., Dong, A., Chen, L., Liu, K. and Guedes Soares, C. (2020), “Analysis of the resistance to penetration of aluminium-alloy plates”, Developments in the Collision and Grounding of Ships and Offshore Structures, C. Guedes Soares (Ed.), Taylor and Francis Group, London, pp. 27-33

 • Xu, He and Guedes Soares, C. (2020), “Experimental study on the dynamic response of a beam under repeated impacts”, Developments in the Collision and Grounding of Ships and Offshore Structures, C. Guedes Soares (Ed.), Taylor and Francis Group, London, pp. 131-138

 • Xu, He and Guedes Soares, C. (2020), “Experimental study on the dynamic response of a beam under repeated impacts”, Developments in the Collision and Grounding of Ships and Offshore Structures, C. Guedes Soares (Ed.), Taylor and Francis Group, London, pp. 131-138

 • Xu, He, Guedes Soares, C. and Zhu, L. (2020), “Scaling the saturated impulse behaviour of strain-rate sensitive square plates”, Developments in the Collision and Grounding of Ships and Offshore Structures, C. Guedes Soares (Ed.), Taylor and Francis Group, London, pp. 171-178

 • Chen, B.Q. and Guedes Soares, C. (2020), “Numerical investigation on the influence of stiffeners on the crushing resistance of web girders in ship grounding”, Developments in the Collision and Grounding of Ships and Offshore Structures, C. Guedes Soares (Ed.), Taylor and Francis Group, London, pp. 49-56

 • Tekgoz, M., Garbatov, Y. and Guedes Soares, C. (2020), “Average stress-strain behaviour of stiffened plates of a box girder in the progressive collapse analysis”, Developments in the Collision and Grounding of Ships and Offshore Structures, C. Guedes Soares (Ed.), Taylor and Francis Group, London, pp. 144-150

 • Georgiev, P., Garbatov, Y., Kirilov, L. and Denev, Y. (2020), “Multi attribute design decision solution of MPV accounting for shipyard building constraints”, Sustainable Development and Innovations in Marine Technologies, Georgiev, P. & Guedes Soares C. (Eds.), Taylor & Francis Group, London, pp. 354-361

 • Rong, H., Teixeira, A.P. and Guedes Soares, C. (2020), “Collision probability assessment based on uncertainty prediction of ship trajectories”, Developments in the Collision and Grounding of Ships and Offshore Structures, C. Guedes Soares (Ed.), Taylor & Francis Group, London, pp. 283-290

 • Yuan, X.L., Zhang, D., Zhang, J.F., Zhang, M.Y. and Guedes Soares, C. (2020), “A novel collision risk awareness framework for ships in real-time operating conditions”, Developments in the Collision and Grounding of Ships and Offshore Structures, C. Guedes Soares (Ed.), Taylor & Francis Group, London, pp. 337-343

 • Rothbarth, G.V.W. and Pinto, R.A.Q. (2019), “Fibreglass repair behaviour as a function of the scarf angle”, Trends in Analysis and Design of Marine Structures, Parunov, J. & Guedes Soares C. (Eds.), Taylor & Francis, London, UK, pp. 385-390

 • Kharghani, N. and Guedes Soares, C. (2019), “Flexural Behaviour Prediction of a Conventional Composite-to-Steel Butt-Joint of Ships Using Layerwise HSDT”, Trends in Analysis and Design of Marine Structures, Parunov, J. & Guedes Soares C. (Eds.), Taylor & Francis, London, UK, pp. 369-375

 • Lin, Z., Zhu, L., Liu, JH. and Guedes Soares, C. (2019), “Progressive collapse analyses of a stiffened box-girder under pure bending”, Trends in Analysis and Design of Marine Structures, Parunov, J. & Guedes Soares C. (Eds.), Taylor & Francis, London, UK, pp. 158-164

 • Lin, Z., Zhu, L., Liu, JH. and Guedes Soares, C. (2019), “Progressive collapse analyses of a stiffened box-girder under pure bending”, Trends in Analysis and Design of Marine Structures, Parunov, J. & Guedes Soares C. (Eds.), Taylor & Francis, London, UK, pp. 158-164

 • Almany, N., Tekgoz, M. and Garbatov, Y. (2019), “Design of an offshore multipurpose support vessel”, Advances in Renewable Energies Offshore, Guedes Soares, C., (Ed.), Taylor & Francis, London, UK, pp. 905-914

 • Almany, N., Tekgoz, M. and Garbatov, Y. (2019), “Design of an offshore multipurpose support vessel”, Advances in Renewable Energies Offshore, Guedes Soares, C., (Ed.), Taylor & Francis, London, UK, pp. 905-914

 • Raed, K., Teixeira, A.P. and Guedes Soares, C. (2019), “Assessment of long-term extreme response of a floating support structure using the environmental contour method”, Advances in Renewable Energies Offshore, Guedes Soares, C., (Ed.), Taylor & Francis, London, UK, pp. 685-692

 • Sobral, J., Kang, J.C. and Guedes Soares, C. (2019) , “Weighting the influencing factors on offshore wind farms availability”, Advances in Renewable Energies Offshore, Guedes Soares, C., (Ed.), Taylor & Francis, London, UK, pp. 761-769

 • Kang, J.C., Guedes Soares, C., Sun, L.P., Lu, Y. and Sobral, J. (2019) , “An opportunistic condition-based maintenance policy for offshore wind farm”, Advances in Renewable Energies Offshore, Guedes Soares, C., (Ed.), Taylor & Francis, London, UK

 • Almany, N., Tekgoz, M. and Garbatov, Y. (2019), “Design of an offshore multipurpose support vessel” , Advances in Renewable Energies Offshore, Guedes Soares, C., (Ed.), Taylor & Francis, London, UK, pp. 905-914

 • Almany, N., Tekgoz, M. and Garbatov, Y. (2019), “Design of an offshore multipurpose support vessel”, Advances in Renewable Energies Offshore, Guedes Soares, C., (Ed.), Taylor & Francis, London, UK, pp. 905-914

 • Raed, K., Teixeira, A.P. and Guedes Soares, C. (2019), “Assessment of long-term extreme response of a floating support structure using the environmental contour method”, Advances in Renewable Energies Offshore, Guedes Soares, C., (Ed.), Taylor & Francis, London, UK, pp. 685-692

 • Xiang, G., Xu, S., Wang, S. and Guedes Soares, C. (2019), “Comparative study on two different mooring systems for a buoy”, Advances in Renewable Energies Offshore, Guedes Soares, C., (Ed.), Taylor & Francis, London, UK, pp. 829-835

 • Wang, S., Xu, S., Xiang, G. and Guedes Soares, C. (2019), “An overview of synthetic mooring cables in marine application”, Advances in Renewable Energies Offshore, Guedes Soares, C., (Ed.), Taylor & Francis, London, UK, pp. 853-863

 • Rezanejad, K. and Guedes Soares, C. (2019), “Application of a stepped sea bottom condition to improve hydrodynamic performance of OWC devices”, Advances in Renewable Energies Offshore, Guedes Soares, C., (Ed.), Taylor & Francis, London, UK, pp. 521-530

 • Rajan, S.N., Karmakar, D. and Guedes Soares, C. (2019), “Influence of damping on the Oscillating Water Column WEC integrated with breakwater”, Advances in Renewable Energies Offshore, Guedes Soares, C., (Ed.), Taylor & Francis, London, UK, pp. 579-587

 • Mohapatra, S.C., Islam, H. and Guedes Soares, C. (2019), “Wave diffraction by a floating fixed truncated vertical cylinder based on Boussinesq equations”, Advances in Renewable Energies Offshore, Guedes Soares, C., (Ed.), Taylor & Francis, London, UK, pp. 281-289

 • Lang, X., Yang, S.H., Ringsberg, J.W., Johnson, E., Guedes Soares, C. and Rahm, M. (2019), “Comparison between full-scale measurements and numerical simulations of mooring forces in a floating point-absorbing WEC system” , Advances in Renewable Energies Offshore, Guedes Soares, C., (Ed.), Taylor & Francis, London, UK, pp. 865-873

 • Kamarlouei, M. and Guedes Soares, C. (2019), “Hydrodynamics of a new two body wave energy converter in the frequency domain”, Advances in Renewable Energies Offshore, Guedes Soares, C., (Ed.), Taylor & Francis, London, UK, pp. 315-321

 • Kamarlouei, M., Gaspar, J.F., Guedes Soares, C., Cruz, B.F. and Mendes, M.J.G.C. (2019), “A review of fault tolerant design in wave energy converters”, Advances in Renewable Energies Offshore, Guedes Soares, C., (Ed.), Taylor & Francis, London, UK, pp. 369-378

 • Kamarlouei, M., Gaspar, J.F., Calvário, M., Hallak, T.S., Guedes Soares, C., Mendes, M.J.G.C. and Thiebaut, F. (2019), “Prototyping and wave tank testing of a floating platform with point absorbers”, Advances in Renewable Energies Offshore, Guedes Soares, C., (Ed.), Taylor & Francis, London, UK, pp. 421-428

 • Hassan, M.A.A.A. and Guedes Soares, C. (2019), “Analysis of vessel shielding effects during installation of spar floating wind turbine”, Advances in Renewable Energies Offshore, Guedes Soares, C., (Ed.), Taylor & Francis, London, UK, pp. 693-702

 • Gaspar, J.F., Hallak, T.S. and Guedes Soares, C. (2019), “Semi-submersible platform concept for a concentric array of Wave Energy Converters”, Advances in Renewable Energies Offshore, Guedes Soares, C., (Ed.), Taylor & Francis, London, UK, pp. 307-314

 • Diaz, H.M., Sannasiraj, S.A. and Guedes Soares, C. (2019), “Experimental study of behaviour and efficiency on a backward bent duct buoy”, Advances in Renewable Energies Offshore, Guedes Soares, C., (Ed.), Taylor & Francis, London, UK, pp. 409-419

 • Diaz, H.M., Fonseca, R.B. and Guedes Soares, C. (2019), “Site selection process for floating offshore wind farms in Madeira Islands”, Advances in Renewable Energies Offshore, Guedes Soares, C., (Ed.), Taylor & Francis, London, UK, pp. 729-737

 • Berenjkoob, M.N., Ghiasi, M. and Guedes Soares, C. (2019), “Hydrodynamic analysis of different geometries of a wave energy absorber buoy”, Advances in Renewable Energies Offshore, Guedes Soares, C., (Ed.), Taylor & Francis, London, UK, pp. 273-280

 • Abbasnia, A. and Guedes Soares, C. (2019), “Hydrodynamic analysis of a land-based oscillating water column device using fully nonlinear numerical wave flume”, Advances in Renewable Energies Offshore, Guedes Soares, C., (Ed.), Taylor & Francis, London, UK, pp. 465-473

 • Salvação, N., Guedes Soares, C. and Bentamy, A. (2019), “Estimating the offshore wind energy along the Portuguese coast using WRF and satellite data”, Advances in Renewable Energies Offshore, Guedes Soares, C. (Ed.), Taylor & Francis Group, London, UK, pp. 703-710

 • Fonseca, R.B., Gonçalves, M. and Guedes Soares, C. (2019), “Wave height error estimation with the triple collocation method for the Canary Islands”, Advances in Renewable Energies Offshore, Guedes Soares, C. (Ed.), Taylor & Francis Group, London, UK, pp. 105-109

 • Damyanliev, T., Georgiev, P., Atanasova, I. and Garbatov, Y. (2018), “Conceptual design of multipurpose ship and fleet accounting for SME shipyard building limitations”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor & Francis Group, London, UK, pp. 317-326

 • Sisci, F. and Ventura, M. (2018), “Tool for initial hull structure dimensioning at ship concept”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor & Francis Group, London, UK, pp. 309-316

 • Sisci, F. and Ventura, M. (2018), “Tool for initial hull structure dimensioning at ship concept”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor & Francis Group, London, UK, pp. 309-316

 • Tadros, M., Ventura, M. and Guedes Soares, C. (2018), “Optimization scheme for the selection of the propeller in ship concept design”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor & Francis Group, London, UK, pp. 233-240

 • Denev, Y., Georgiev, P. and Garbatov, Y. (2018) , “Analysis of multipurpose ship performance accounting for SME shipyard building limitations”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor & Francis Group, London, UK, pp. 165-174

 • Denev, Y., Georgiev, P. and Garbatov, Y. (2018), “Analysis of multipurpose ship performance accounting for SME shipyard building limitations”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor & Francis Group, London, UK, pp. 165-174

 • Yeter, B., Garbatov, Y. and Guedes Soares, C. (2018), “Probabilistic life-cycle assessment for offshore wind turbines”, Maritime Transportation and Harvesting of Sea Resources, Guedes Soares, C. & Teixeira A.P. (Eds.), Taylor & Francis Group, London, UK, pp. 1229-1237

 • Oliveira, A. and Gordo, J.M. (2018), “Cutting processes in shipbuilding - a case study”, Maritime Transportation and Harvesting of Sea Resources, Guedes Soares, C. & Teixeira A.P. (Eds.), Taylor & Francis Group, London, UK, pp. 757-762

 • Jafaryeganeh, H., Ventura, M. and Guedes Soares, C. (2018), “Parametric modelling of tanker internal compartment layout for survivability improvement within the framework of regulations”, Maritime Transportation and Harvesting of Sea Resources, Guedes Soares, C. & Teixeira A.P. (Eds.), Taylor & Francis Group, London, UK, pp. 23-30

 • Bharadwaj, U.R., Koch, T., Frank, D., Herrera, L., Randall, G., Volbeda, C., Garbatov, Y., Hirdaris, S., Tsouvalis, N., Carneros, A., Zhou, P. and Atanasova, I. (2018), “Ship Lifecycle Software Solutions (SHIPLYS) - an overview of the project, its first phase of development and challenges”, Maritime Transportation and Harvesting of Sea Resources, Guedes Soares, C. & Teixeira A.P. (Eds.), Taylor & Francis Group, London, UK, pp. 889-896

 • Yazdi, M. and Zarei, E. (2018), “Uncertainty Handling in the Safety Risk Analysis: An Integrated Approach Based on Fuzzy Fault Tree Analysis”, J Fail. Anal. and Preven., Vo. 18, pp. 392–404

 • Mathias, N.A.S., Santos, T.A. and Guedes Soares, C. (2018), “Analysis of a new container terminal using a simulation approach”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor and Francis, London, UK, pp. 43-52

 • Simões, A., Salvador, R. and Guedes Soares, C. (2018), “Evaluation of the Portuguese ocean economy using the satellite account for the sea”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor and Francis, London, UK, pp. 63-68

 • Santos, T.A., Guedes Soares, C. and Botter, R.C. (2018), “Charaterizing the operation of a roll-on roll-off short sea service”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor and Francis, London, UK, pp. 77-88

 • Botter, R.C., Santos, T.A. and Guedes Soares, C. (2018), “Characterizing container ship traffic along the Portuguese coast using Big Data”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor and Francis, London, UK, pp. 93-100

 • Santos, T.A. and Guedes Soares, C. (2018), “Methodology for estimating technical characteristics of container ships from AIS data”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor and Francis, London, UK, pp. 101-110

 • Bhardwaj, U., Teixeira, A.P. and Guedes Soares, C. (2018), “Availability assessment of a power plant working on Allam cycle”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor and Francis, London, UK, pp. 525-536

 • Abdelmalek, M. and Guedes Soares, C. (2018), “Risk assessment of subsea oil and gas production systems at the concept selection phase”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor and Francis, London, UK, pp. 511-524

 • Garbatov, Y. and Sisci, F. (2018), “Sensitivity analysis of risk-based conceptual ship design”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor and Francis, London, UK, pp. 499-510

 • Costa, B., Jacinto, C., Teixeira, A.P. and Guedes Soares, C. (2018), “Causal analysis of accidents at work in a shipyard complemented with Bayesian Nets modeling”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor and Francis, London, UK, pp. 421-430

 • Costa, B., Jacinto, C., Teixeira, A.P. and Guedes Soares, C. (2018), “Causal analysis of accidents at work in a shipyard complemented with Bayesian Nets modeling”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor and Francis, London, UK, pp. 421-430

 • Zeng, Y., Zhang, J.F., Teixeira, A.P. and Guedes Soares, C. (2018), “Role assignment and conflict identification for the encounter ships under COLREGs”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor and Francis, London, UK, pp. 137-146

 • Atanasova, I., Damyanliev, T., Georgiev, P. and Garbatov, Y. (2018), “Analysis of SME ship repair yard capacity in building new ships”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor & Francis Group, London, UK, pp. 431-438

 • Oliveira, A. and Gordo, J.M. (2018), “Model to forecast times and costs of cutting, assembling and welding stages of construction of ship blocks”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor & Francis Group, London, UK, pp. 413-420

 • Kharghani, N. and Guedes Soares, C. (2018), “Experimental study of the residual strength of damaged hybrid steel-FRP balcony overhangs of ships”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor & Francis Group, London, UK, pp. 403-412

 • Calvário, M., Teixeira, A.P. and Guedes Soares, C. (2018), “Uncentainty propagation and sensitivity analysis of a laminated composite beam”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor & Francis Group, London, UK, pp. 395-402

 • Calvário, M., Teixeira, A.P. and Guedes Soares, C. (2018), “Uncentainty propagation and sensitivity analysis of a laminated composite beam”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor & Francis Group, London, UK, pp. 395-402

 • Nascimento, F., Sutherland, L.S. and Garbatov, Y. (2018), “Experimental and numerical structural analysis of a windsurf fin”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor & Francis Group, London, UK, pp. 387-394

 • Nascimento, F., Sutherland, L.S. and Garbatov, Y. (2018), “Experimental and numerical structural analysis of a windsurf fin”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor & Francis Group, London, UK, pp. 387-394

 • Saad-Eldeen, S., Garbatov, Y. and Guedes Soares, C. (2018), “Failure assessment of wash plates with different degree of openings”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor & Francis Group, London, UK, pp. 377-386

 • Yeter, B., Garbatov, Y. and Guedes Soares, C. (2018), “Failure assessment of transition piece of jacket offshore wind turbine”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor & Francis Group, London, UK, pp. 359-368

 • Tekgoz, M., Garbatov, Y. and Guedes Soares, C. (2018), “Residual strength assessment of a grounded container ship subjected to asymmetrical bending loads”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor & Francis Group, London, UK, pp. 337-344

 • Islam, H. and Guedes Soares, C. (2018) , “Prediction of ship resistance in head waves using OpenFOAM”, Maritime Transportation and Harvesting of Sea Resources, Guedes Soares, C. & Teixeira A.P. (Eds.), Taylor & Francis Group, London, UK, pp. 527-533

 • Xu, S., Wang, S., Hallak, T.S., Rezanejad, K., Hinostroza, M.A., Guedes Soares, C., Rodriguez, C.A., Rosa-Santos, P. and Taveira-Pinto, F. (2018) , “Experimental study of two mooring systems for wave energy converters”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor & Francis Group, London, UK, pp. 667-686

 • Taveira-Pinto, F., Rosa-Santos, P., Rodriguez, C.A., López, M., Ramos, V., Xu, S., Rezanejad, K., Wang, S. and Guedes Soares, C. (2018), “Optimization of wave energy converters in the OPWEC Project”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor & Francis Group, London, UK, pp. 657-666

 • Guo, Y., Mohapatra, S.C. and Guedes Soares, C. (2018), “Wave interaction with a rectangular long floating structure over flat bottom”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor & Francis Group, London, UK, pp. 647-656

 • Islam, H., Mohapatra, S.C. and Guedes Soares, C. (2018), “Comparisons of CFD, experimental and analytical simulations of a heaving box-type floating structure” , Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor & Francis Group, London, UK, pp. 633-640

 • Belga, F., Sutulo, S. and Guedes Soares, C. (2018), “Comparative study of various strip-theory seakeeping codes in predicting heave and pitch motions of fast displacement ships in head seas”, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor & Francis Group, London, UK, pp. 599-610

 • Belga, F., Ventura, M. and Guedes Soares, C. (2018), “Seakeeping optimization of a catamaran to operate as fast crew supplier at the Alentejo basin”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor & Francis Group, London, UK, pp. 587-598

 • Rodrigues, S.R.A., Santos, J.A. e Guedes Soares, C. (2018), “Numerical and experimental study of ship-generated waves”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor & Francis Group, London, UK, pp. 569-578

 • Abdelwahab, H.S. and Guedes Soares, C. (2018), “Motions and mooring loads of a tanker moored at open jetty in long crested irregular waves including second order effects”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor & Francis Group, London, UK, pp. 557-568

 • Pedro, F.G.L., Santos, J.A., Pinheiro, L.V., Fortes, C.J.E.M. and Hinostroza, M.A. (2018), “Characterization of ship motions induced by wake waves”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor & Francis Group, London, UK, pp. 547-556



Articles in Conferences
 • Santos, T.A. Martins, P. and Guedes Soares, C. (2019), “Short sea shipping and the promotion of multimodality in the European Atlantic Area”, Proceedings of the 27th Annual Conference of the International Association of Maritime Economists, 25-28 June, Athens, Greece

 • Santos, T.A., Martins, P. and Guedes Soares, C. (2019) , “The impact of container terminal relocation in hinterland delimitations”, Proceedings of the 27th Annual Conference of the International Association of Maritime Economists, 25-28 June, Athens, Greece

 • Sobral, J., Badolato, A. and Roque, A. (2019), “Optimization of the lubrication programme through the automatized control by resorting to techology 4.0 (in Portuguese)”, 15º. Congressos Nacional de Manutenção, 21-22 November, Braga, Portugal

 • Carvalho, A-J. and Sobral, J. (2019), “Influence on the operation and maintenace of the operational availability of industrial equipment (in Portuguese)”, 15º. Congressos Nacional de Manutenção, 21-22 November, Braga, Portugal

 • Carvalho, A-J. and Sobral, J. (2019) , “Influence on the operation and maintenace of the operational availability of industrial equipment (in Portuguese)”, 15º. Congressos Nacional de Manutenção, 21-22 November, Braga, Portugal

 • Assis, R., Sobral, J. and Ribeiro, J. (2019), “Substitution of the group of components of rapid wear and subject to alternative policies of maintenance correction, systematic and predictive prevention (in Portuguese)”, 15º. Congressos Nacional de Manutenção, 21-22 November, Braga, Portugal

 • Assis, R. and Sobral, J. (2019), “Analysis of the economic viability of maintaining an expensive spare as repairable and non-repairable alternative (in Portuguese)”, 15º. Congressos Nacional de Manutenção, 21-22 November, Braga, Portugal

 • Sobral, J., Gaspar, D. and Almeida, N. (2019), “Maintenance of technical installations in buildings based on asset life cycle analysis”, International Conference on Automation Innovation in Construction (CIAC 2019), 7-8 November, Leiria, Portugal

 • Oliveira, V., Sobral, J. and Margarida Ribeiro, M. (2019), “Development of a Tool for Selection and Acquisition of Medical Devices based on the Analytic Hierarchy Process”, 2019 IEEE 6th Portuguese Meeting on Bioengineering (ENBENG), 22-23 February, Lisbon, Portugal.

 • Águas, B. and Sobral, J. (2019), “Development of a Risk Management Tool for Healthcare Providers”, 2019 IEEE 6th Portuguese Meeting on Bioengineering (ENBENG), 22-23 February, Lisbon, Portugal

 • Yazdi, M. and Darvishmotevali, M. (2019), “Fuzzy-Based Failure Diagnostic Analysis in a Chemical Process Industry”, 13th International Conference on Theory and Application of Fuzzy Systems and Soft Computing (ICAFS), 26-27 August, Warsaw, Poland, pp. 724-731

 • Wu, B., Zhang, J., Yip, T.L., Yan, X.P. and Guedes Soares, C. (2019), “Fuzzy-logic based ship-bridge collision alert model form ship behaviour perspective”, 5th International Conference on Transportation Information and Safety (ICTIS 2019), 14-17 July, Liverpool, UK

 • Wang, Zi., Guedes Soares, C. and Zou, Z.J. (2019), “Investigation of Training Data Selection in the Black-box Modeling of Ship Maneuvering Motion”, 11th International Workshop on Ship and Marine Hydrodynamics (IWSH 2019), 22-25 September, Hamburg, Germany

 • Bhardwaj, U., Teixeira, A. P. and Guedes Soares, C. (2019), “Reliability prediction of a subsea separator”, 4th Workshop and Symposium on Safety and Integrity Management of Operations in Harsh Environments: Risk, Reliability and Resilience (CRISE4), 15-17 July, St. John's, Newfoundland, Canada, p. 1-9

 • Li, H. e Guedes Soares, C. (2019), “Reliability analysis of floating offshore wind turbines support structures based on Hierarchical Bayesian Network)”, Proceedings of the 29th European Safety and Reliability Conference (ESREL 2019), 22-26 September, Hannover, Germany, pp. 2489-2495

 • Sobral, J. and Guedes Soares, C. (2019), “Offshore wind farms maintenance strategy using the analytic network process (ANP)”, Proceedings of the 29th European Safety and Reliability Conference (ESREL 2019), 22-26 September, Hannover, Germany, pp. 615-622.

 • Rong, H., Teixeira, A.P. and Guedes Soares, C. (2019), “Risk of ship near collision scenarios off the coast of Portugal”, 29th European Safety and Reliability Conference (ESREL 2019), 22-26 September, Hannover, Germany, pp. 3660-3666.

 • Chichi, D. and Garbatov, Y. (2019), “Retrofitting Analysis of Tanker Ship Hull Structure Subjected to Corrosion”, Brodogradnja, Vol. 70(2), pp. 87-109

 • Calvário, M., Gaspar, J.F., Kamarlouei, M. and Guedes Soares, C. (2019), “Optimal power take-off parameters for a bottom-hinged plate wave energy converter”, Proceedings of the 13th European Wave and Tidal Energy Conference (EWTEC 2019), 1-6 September, Napoli, Italy.

 • Kamarlouei, M., Gaspar, J.F., Calvario, M., Hallak, T.S., Mendes, M.J.G.C., Thiebaut, F. and Guedes Soares, C. (2019), “On the experimental study of a concentric wave energy array adapted to an offshore floating platform”, Proceedings of the 13th European Wave and Tidal Energy Conference (EWTEC 2019), 1-6 September, Napoli, Italy.

 • Francisco, M.B.R.M., Mendes, M.J.G.C. and Calado, J.M.F. (2019), “An Electro-pneumatic Prototype to Support the Teaching of Industry 4.0 Concepts”, 5th Experiment@ International Conference (Exp.at'19), 12-14 June, Funchal, Madeira, Portugal, pp. 428-433.

 • Garbatov, Y. and Huang, Y.C. (2019), “Multiobjective reliability-based design of ship structures subjected to fatigue damage and compressive collapse”, Proceedings of the ASME 2019 38th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2019), 9-14 June, Glasgow, Scotland, UK

 • Xu, H.T., Hinostroza, M.A. and Guedes Soares, C. (2019), “Time-Vayring vector field guidance law for path following and obstacle avoidance for underactuated autonomous vehicles”, Proceedings of the ASME 2019 38th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2019), 9-14 June, Glasgow, Scotland, UK

 • Rezanejad, K., Gadelho, J.F.M., Lopes, I., Carballo, R. and Guedes Soares, C. (2019), “Improving the hydrodynamic performance of OWC wave energy converter by attaching a step”, Proceedings of the ASME 2019 38th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2019), 9-14 June, Glasgow, Scotland, UK.

 • Rezanejad, K. and Guedes Soares, C. (2019), “Hydrodynamic investigation of a novel concept of OWC type wave energy converter device”, Proceedings of the ASME 2019 38th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2019), 9-14 June, Glasgow, Scotland, UK

 • Ren, H.L., Xu, C., Zhou, XQ., Sutulo, S. and Guedes Soares, C. (2019), “A numerical method for calculation of ship-ship hydrodynamics interaction in shallow water accounging for sinkage and trim”, Proceedings of the ASME 2019 38th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2019), 9-14 June, Glasgow, Scotland, UK

 • Vettor, R. and Guedes Soares, C. (2019), “Comparison of VOS and ERA-Interim wave data”, Proceedings of the ASME 2019 38th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2019), 9-14 June, Glasgow, Scotland, UK

 • Campos, R. and Guedes Soares, C. (2019), “Global assessments of surface winds and waves from an ensemble forecast system suring staeliite data”, Proceedings of the ASME 2019 38th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2019), 9-14 June, Glasgow, Scotland, UK

 • Campos, R. and Guedes Soares, C. (2019), “Global assessments of surface winds and waves from an ensemble forecast system suring staeliite data”, Proceedings of the ASME 2019 38th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2019), 9-14 June, Glasgow, Scotland, UK

 • Save, L., Brandlat, M., Haynes, W., Bellini, E., Ferreira, P., Lauteritz, J.P. and Gonzalez, J.J. (2019), “The Development of Resilience Management Guidelines to Protect Critical Infrastructures in Europe”, Proceedings of the 20th Congress of the International Ergonomics Association (IEA 2018), 26-30 August, Florence, Italy

 • Liu, B., Zhu, L. and Guedes Soares, C. (2019), “Numerical assessment of the crashworthiness of ship double-hull structures in grounding”, Third International Conference on Safety and Reliability of Ships, Offshore & Subsea Structures (SAROSS 2018), 23-24 May, Wuhan, China

 • Liu, B., Zhu, L. and Guedes Soares, C. (2019), “Numerical assessment of the crashworthiness of ship double-hull structures in grounding”, Third International Conference on Safety and Reliability of Ships, Offshore & Subsea Structures (SAROSS 2018), 23-24 May, Wuhan, China

 • Sacramento, M., Almeida, C. and Moreira, M. (2019), “IFOHAM and determining periodic solutions of non-linear differential equations” (In Portuguese), 4th International Conference on Differential & Difference Equations Applications (ICDDEA 2019), 1-5 July, Lisbon, Portugal.

 • Almeida, C., Sacramento, M. and Moreira, M. (2019), “Determine the amplitude and oscillating frequency and asymptotic resoultion of the Van der Pol equation resoting to the IFOHAM method” (In Portuguese), 4th International Conference on Differential & Difference Equations Applications (ICDDEA 2019), 1-5 July, Lisbon, Portugal

 • Sutulo, S. and Guedes Soares, C. (2018), “Prediction of manoeuvring characteristics of the KVLCC2 ship with a hybrid system-based code”, Workshop on Verification and Validation of Ship Manoeuvring Simulation Methods (SIMMAN 2014), 7-10 Dec 2014

 • Sutulo, S. and Guedes Soares, C. (2018) , “Comparative testing of an identification method based on the genetic and ABC algorithms”, Proceedings of The International Marine Simulator Forum (MARSIM 2018), 12-16 August, Halifax, Canada

 • Datta, R., Rodrigues, J.M. and Guedes Soares, C. (2018), “Prediction of motions and wave induced loads on a container ship using non linear 3D time domain panel method”, 4th International Conference in Ocean Engineering (ICOE 2018), 18-21 February, Normandy, Northern France

 • Rajendran, S. and Guedes Soares, C. (2018), “Marine Vehicles and Floating Systems: Effect of slamming and green water on short term distribution of vertical bending moment of a containership in abnormal waves”, 4th International Conference in Ocean Engineering (ICOE 2018), 18-21 February, Normandy, Northern France

 • Santos, A.M.P., Guedes Soares, C., Campos, A., Silva, A.D., Garrido, S. and Drago, T. (2018) , “Autonomous Observing Systems in Fishing Vessels for the Support of Marine Ecosystem Management”, Forum on Fisheries Science in the Mediterranean and the Black Sea (FAO 2018), 10-14 December, Rome, Italy

 • Kumawat, A.K., Karmakar, D. and Guedes Soares, C. (2018), “Wave energy conversion by multiple bottom-hinged surging WEC”, 4th International Conference in Ocean Engineering (ICOE 2018), 18-21 February, Normandy, Northern France

 • Kumawat, A.K., Karmakar, D. and Guedes Soares, C. (2018), “Numerical investigation of semi-submersible floating wind turbine combined with flap-type WECs”, 4th International Conference in Ocean Engineering (ICOE 2018), 18-21 February, Normandy, Northern France

 • Zhang, J., Liu, Q., Shi, X. and Guedes Soares, C. (2018), “Experimental study on the wave loads on monopile and jacket type support of offshore wind turbines” , Proceedings of the ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2018), 17-22 June, Madrid, Spain

 • Yeter, B., Garbatov, Y., Guedes Soares, C., Punuai, W. and Azad, M.D.S. (2018), “Response of monopile offshore wind turbine structure subjected to seismic loads and degradation”, Proceedings of the 7th Asia Conference on Earthquake Engineering, 22-25 November, Bangkok, Thailand

 • Yeter, B., Garbatov, Y., Guedes Soares, C., Punuai, W. and Azad, M.D.S. (2018), “Response of monopile offshore wind turbine structure subjected to seismic loads and degradation”, Proceedings of the 7th Asia Conference on Earthquake Engineering, 22-25 November, Bangkok, Thailand

 • Ferreira, P. and Bellini, E. (2018), “Managing interdependencies in critical infrastructures - a cornerstone for system resilience”, 28th European Safety and Reliability Conference (ESREL 2018), 17-21 June, Trondheim, Norway

 • Beites, N., Dias, M., Mendes, M.J.G.C., Carreira, F., Campos, F. and Calado, J.M.F. (2018), “A gantry robot automatic positioning system using computational vision”, Proceedings of the 1st Iberic Conference on Theoretical and Experimental Mechanics and Materials, 4-7 November, Porto, Portugal, pp. 1031-1042

 • Liu, B., Villavicencio, R., Liu, K., Zhu, L. and Guedes Soares, C. (2018), “Response of an aluminum stiffened plate under extreme slamming loadings”, Proceedings of the ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2018), 17-22 June, Madrid, Spain

 • Roque, A. and Sobral, J. (2018), “Predictive Maintenance using Ultrasound Technology as Condition Monitoring”, Maintenance Performance Measurement and Management 2018, 21-23 June, Coimbra, Portugal

 • Roque, A. and Sobral, J. (2018), “Motion amplification technology as a tool to support maintenance decisions”, Maintenance Performance Measurement and Management 2018, 21-23 June, Coimbra, Portugal

 • Mendes, M.J.G.C., Neto, I.M.M.S. and Calado, J.M.F. (2018), “Fault Diagnosis System Via Internet Applied to a Gantry Robot - A Proposal for Industry 4.0”, 18th IEEE International Conference on Autonomous Robot Systems and Competitions (ICARSC), 25-27 April, Torres Vedras, Portugal

 • Xu, S., Guedes Soares, C. and Teixeira, A. P. (2018), “Reliablity analysis of short term mooring tension of a semi-submersible system”, Proceedings of the ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2018), 17-22 June, Madrid, Spain

 • Teixeira, A.P. and Guedes Soares, C. (2018), “Risk of maritime traffic in coastal waters”, Proceedings of the ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2018), 17-22 June, Madrid, Spain

 • Teixeira, A.P. and Guedes Soares, C. (2018), “Adaptive methods for reliability analysis of marine structures”, Proceedings of the ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2018), 17-22 June, Madrid, Spain

 • Garbatov, Y. and Guedes Soares, C. (2018), “Corrosion margins for redundant ship structures”, Proceedings of the ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2018), 17-22 June, Madrid, Spain

 • Dong, Y., Garbatov, Y. and Guedes Soares, C. (2018), “Strain-based fatigue reliability analysis of a load-carrying fillet welded cruciform joint”, Proceedings of the ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2018), 17-22 June, Madrid, Spain

 • Dong, Y., Garbatov, Y. and Guedes Soares, C. (2018), “Strain-based fatigue reliability analysis of a load-carrying fillet welded cruciform joint”, Arctic Engineering (OMAE 2018), 17-22 June, Madrid, Spain

 • Dong, Y., Garbatov, Y. and Guedes Soares, C. (2018), “Fatigue reliability assessment of fillet welded cruciform joints based on the fatigue notch factor and the local strain approach”, Proceedings of the ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2018), 17-22 June, Madrid, Spain

 • Dong, Y., Garbatov, Y. and Guedes Soares, C. (2018), “Fatigue reliability assessment of fillet welded cruciform joints based on the fatigue notch factor and the local strain approach”, Proceedings of the ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2018), 17-22 June, Madrid, Spain

 • Zhang, J., Liu, Q., Shi, X. and Guedes Soares, C. (2018), “Experimental study on the wave loads on monopile and jacket type support of offshore wind turbines”, Arctic Engineering (OMAE 2018), 17-22 June, Madrid, Spain

 • Zhang, J., Liu, Q., Shi, X. and Guedes Soares, C. (2018), “Experimental study on the wave loads on monopile and jacket type support of offshore wind turbines”, Proceedings of the ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2018), 17-22 June, Madrid, Spain

 • Yeter, B., Garbatov, Y. and Guedes Soares, C. (2018), “Strength assessment of jacket offshore wind turbine support structure accounting for rupture”, Proceedings of the ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2018), 17-22 June, Madrid, Spain

 • Yeter, B., Garbatov, Y. and Guedes Soares, C. (2018), “Risk-based assessment of fixed offshore wind turbine support structures”, Proceedings of the ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2018), 17-22 June, Madrid, Spain

 • Liu, B., Villavicencio, R., Liu, K., Zhu, L. and Guedes Soares, C. (2018), “Response of an aluminum stiffened plate under extreme slamming loadings”, Proceedings of the ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2018), 17-22 June, Madrid, Spain

 • Liu, B., Chen, L., Liao, XT., Zhu, L. and Guedes Soares, C. (2018), “Finite element analysis of a container ship struck by rigid and deformable bows”, Proceedings of the ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2018), 17-22 June, Madrid, Spain

 • Gordo, J. M. and Guedes Soares, C. (2018), “Pure bending test on a box girder with low panel's slenderness”, Arctic Engineering (OMAE 2018), 17-22 June, Madrid, Spain

 • Chen, B.Q., Hashemzadeh, M., Garbatov, Y. and Guedes Soares, C. (2018), “Recent developments in experimental and numerical assessments of welding-induced residual stresses”, Proceedings of the ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2018), 17-22 June, Madrid, Spain

 • Chen, B.Q. and Guedes Soares, C. (2018), “Numerical investigation on weld induced imperfections in aluminium ship plates”, Proceedings of the ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2018), 17-22 June, Madrid, Spain

 • Xu, S., Ji, C.-Y. and Guedes Soares, C. (2018), “Analysis of catenary mooring systems based on truncated mooring experiments”, Proceedings of the ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2018), 17-22 June, Madrid, Spain

 • Xu, H.T., Hassani, V., Hinostroza, M.A. and Guedes Soares, C. (2018), “Real-time parameter estimation of nonlinear vessel steering model using support vector machine”, Proceedings of the ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2018), 17-22 June, Madrid, Spain

 • Xu, H.T., Hassani, V. and Guedes Soares, C. (2018), “Parameters estimation of nonlinear manoeuvring model for marine surface ship based on PMM tests”, Proceedings of the ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2018), 17-22 June, Madrid, Spain

 • Wang, S., Rajendran, S. and Guedes Soares, C. (2018), “Investigation of bottom slamming on ships in irregular waves”, Proceedings of the ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2018), 17-22 June, Madrid, Spain

 • Wang, S. and Guedes Soares, C. (2018), “A numerical investigation on water slamming of stiffened panels”, Proceedings of the ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2018), 17-22 June, Madrid, Spain

 • Ren. H., Xu, C., Zhou, XQ., Sutulo, S., Guedes Soares, C. and Li, C.F. (2018), “Analysis of numerical errors of the Hess Smith Panel Method with asymmetric meshes”, Proceedings of the ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2018), 17-22 June, Madrid, Spain

 • Rajendran, S. and Guedes Soares, C. (2018), “Short term statistics of hydroelastic loads of a containership in head and oblique seas”, Proceedings of the ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2018), 17-22 June, Madrid, Spain

 • Hinostroza, M.A., Guedes Soares, C. and Xu, H.T. (2018), “Motion planning, guidance and control system for autonomous surface vessel”, Proceedings of the ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2018), 17-22 June, Madrid, Spain

 • Hallak, T. S., Ventura, M., and Guedes Soares, C. (2018), “An optimization method for the concept design of semi-submersible offshore accommodation units”, Proceedings of the ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2018), 17-22 June, Madrid, Spain

 • Hallak, T.S., Gaspar, J.F., Kamarlouei, M., Calvário, M., Mendes, M.J.G.C., Thiebaut, F. and Guedes Soares, C. (2018), “Numerical and Experimental analysis of a hybrid wind-wave offshore floating platform's hull”, Proceedings of the ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2018), 17-22 June, Madrid, Spain

 • Santoro, A., Arena, F. and Guedes Soares, C. (2018), “On the sequence of large waves from field data”, Proceedings of the ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2018), 17-22 June, Madrid, Spain

 • Rodriguez, G., Guedes Soares, C. and Nieto Borge, J.C. (2018), “Exploring distribuitonal properties of the maximum wave height in a sea state”, Proceedings of the ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2018), 17-22 June, Madrid, Spain

 • Ponce de Leon, S., Osborne, A.R. and Guedes Soares, C. (2018), “On the importance of the exact nonlinear interactions in the spectral characterization of rogue waves”, Proceedings of the ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2018), 17-22 June, Madrid, Spain

 • Ponce de Leon, S., Bettencourt, J., van Vledder, G., Doohan, P., Higgins, C., Guedes Soares, C. and Dias, F. (2018), “Performance of WAVEWATCH-III and SWAN models in the North Sea”, Proceedings of the ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2018), 17-22 June, Madrid, Spain

 • Palencia, O.G., Teixeira, A.P. and Guedes Soares, C. (2017), “Modelling of deterioration processes in ship structures through Dynamic Bayesian Networks”, 12th International Conference on Structural Safety & Reliability (ICOSSAR 2017), 6-10 August, TU Wien, Vienna, Austria, pp. 1936-1946

 • Sobral, J., Teixeira, D., Morais, H. and Neves, M. (2017), “Methodology to Assess Medical Processes based on a Failure Modes and Effects Analysis (FMEA)”, 5th ENBENG Portuguese Bioengineering Meeting, February 2017, Coimbra, Portugal

 • Gonçalves, P., Sobral, J. and Ferreira, L. (2017), “Airworthiness Process Applied to the Portuguese Remotely Piloted Aircraft Systems”, Applied Vehicles Technology (AVT) Specialists’ Meeting AVT-273/RSM-048, May 2017, Vilnius, Lithuania

 • Calvário, M., Gaspar, J.F., Kamarlouei, M. and Guedes Soares, C. (2017), “Optimization of Mechanical Design and Control Parameters of an Oil-Hydraulic Power Take-off System”, 12th European Wave and Tidal Energy Conference (EWTEC 2017), 27 August - 1 September, Cork, Ireland

 • Pedro, F., Hinostroza, M.A., Ramos, A., Pinheiro, L., Santos, J.A. and Fortes, C.J.E.M. (2017), “Experimental characterization of ship motions induced by passing ships”, International Short Course Conference on Applied Coastal Research (SCACR2017), 3-6 October, Santander, Spain

 • Pedro, F., Pinheiro, L., Ramos, A., Hinostroza, M.A., Santos, J.A. and Fortes, C.J.E.M. (2017), “Experimental characterization of the motions of a moored vessel subjected to ocean and ship waves” (In Portuguese), Simpósio de Hidráulica e Recursos Hídricos dos Países de Língua Portuguesa (13º Silusba), 13-15 September, Porto, Portugal

 • Osborne, A.R. and Ponce de Leon, S. (2017), “Properties of rogue waves and the shape of the ocean wave power spectrum”, Proceedings of the ASME 2016 36th International Conference on Ocean, Offshore and Arctic Engineering (OMAE17), 25-30 June, Trondheim, Norway

 • Rodrigues, J.M. and Guedes Soares, C. (2017), “Ship vertical loads from using an adaptive mesh pressure integration technique for Froude-Krylov forces calculation”, Proceedings of the ASME 2016 36th International Conference on Ocean, Offshore and Arctic Engineering (OMAE17), 25-30 June, Trondheim, Norway

 • Rajendran, S. and Guedes Soares, C. (2017), “Numerical investigation of parametric rolling of a container ship in regular and irregular waves”, Proceedings of the ASME 2016 36th International Conference on Ocean, Offshore and Arctic Engineering (OMAE17), 25-30 June, Trondheim, Norway

 • Diaz, H.M., Rodrigues, J.M. and Guedes Soares, C. (2017), “Evaluation of an offshore floating wind power project on the Galician coast”, Proceedings of the ASME 2016 36th International Conference on Ocean, Offshore and Arctic Engineering (OMAE17), 25-30 June, Trondheim, Norway

 • Yeter, B., Garbatov, Y. and Guedes Soares, C. (2017), “Risk-based multi-objective optimisation of a monopile offshore wind turbine support structure”, Proceedings of the ASME 2016 36th International Conference on Ocean, Offshore and Arctic Engineering (OMAE17), 25-30 June, Trondheim, Norway

 • Li, C.F., Fu, P., Ren, H.L., Xu, W.J. and Guedes Soares, C. (2017), “Ultimate bearing capacity assessment of hull girder with Asymmetric cross-section”, Proceedings of the ASME 2016 36th International Conference on Ocean, Offshore and Arctic Engineering (OMAE17), 25-30 June, Trondheim, Norway

 • Garbatov, Y. and Guedes Soares, C. (2017), “Spatial corrosion wastage modelling of steel plates subjected to marine environments”, Proceedings of the ASME 2016 36th International Conference on Ocean, Offshore and Arctic Engineering (OMAE17), 25-30 June, Trondheim, Norway

 • Teixeira, A.P., Palencia, O.G. and Guedes Soares, C. (2017), “Reliability analysis of corroded pipelines under external pressure”, Proceedings of the ASME 2016 36th International Conference on Ocean, Offshore and Arctic Engineering (OMAE17), 25-30 June, Trondheim, Norway

 • Palencia, O.G., Teixeira, A.P. and Guedes Soares, C. (2017) , “Safety of pipelines subjected to deterioration processes modelled through Dynamic Bayesian Networks”, Proceedings of the ASME 2016 36th International Conference on Ocean, Offshore and Arctic Engineering (OMAE17), 25-30 June, Trondheim, Norway

 • Corak, M., Parunov, J. and Guedes Soares, C. (2017), “Structural Reliability Assessment of an oil tanker accidentally grounded in the Adriatic Sea” , Proceedings of the ASME 2016 36th International Conference on Ocean, Offshore and Arctic Engineering (OMAE17), 25-30 June, Trondheim, Norway

 • Sobral, J. and Guedes Soares, C. (2017), “Physical safety barriers behaviour based on RAM analysis using DEMATEL method”, 27th European Safety and Reliability Conference (ESREL 2017), 18-22 June, Portoroz, Slovenia

 • Patel, SD. and Guedes Soares, C. (2017), “System Probability of Failure and Sensitivity Analyses of Composite Plates under Low Velocity Impact”, Composite Structures, Vol. 180, pp. 1022-1031

 • Beckert, J., Ferreira, D., Minhalma, R., Mendes, J.P. and Alves, F. (2016), “Mathematical Modelling Exercise: from the Laboratory to the Field” (In Portuguese), XIV Jornadas da Sociedade Portuguesa de Medicina Desportiva, 30 April, Lisbon, Portugal



For information about all CENTEC publications you can download: Download the Complete List of CENTEC Publications