|
|
Publications
Santos, J.A., Pinheiro, L.V., Abdelwahab, H.S., Pedro, F.G.L., Fortes, C.J.E.M., Hinostroza, M.A. and Guedes Soares, C. (2018), “Physical modelling of motions and forces on a moored ship at the Leixões Port”, 8º MCSul - Conferencia Sul em Modelagem Computacional e VIII SEMENGO - Seminario e Workshop em Engenharia Oceânica, 22-24 October, Cidade de Rio Grande, Rio Grande do Sul, Brasil.
This paper describes the physical model, experimental setup and tests performed at the Portuguese Civil Engineering Laboratory (LNEC), to study the motions and forces of a moored ship at the Leixões port, for different sea states in irregular waves. The tests were carried out at one of the wave tanks of LNEC, where the Leixões port layout was implemented at scale 1:80 with the detailed model similar to the prototype bathymetry and surrounding structures. The moored ship is a 3.43 m long scale model of the well-known “Esso Osaka” tanker and is moored to the pier A of the oil terminal at 0.135 m draft. Several types of measurements were recorded in this study. The free-surface elevation and wave direction were measured with a set of resistive wave gauges. The wave velocities at the entrance of the harbour were measured with an acoustic Doppler velocimeter. Motions of the moored ship were measured with the OptiTrack™motion capture system whereas forces on fenders and mooring lines were measured with load cells attached to a complex spring system developed at LNEC. Several tests were carried out for a number of incident sea states characterized by a JONSWAP spectrum, with different significant wave heights and peak periods. The measurement, analysis and results obtained for the incident wave conditions characterized by a significant wave height of6m and a peak wave period of 14s are presented and discussed in this paper.
If you did not manage to obtain a copy of this paper: Request a copy of this article
For information about all CENTEC publications you can download: Download the Complete List of CENTEC Publications
|