Group of Marine Structures > Publications

Articles in Journals
 • Jones, N. and Guedes Soares, C. (1978), “Higher Modal Dynamic Plastic Behaviour of Beams Loaded Impulsively”, International Journal of Mechanical Science, Vol. 20, pp. 135 - 147

 • Guedes Soares, C. (1980), “Rigid-Plastic Methods of Analysis of Structures subjected to Intense Dynamic Loading” (In Portuguese), Técnica, Vol. 42, Issue 461, pp. 89-95

 • Guedes Soares, C. (1981), “A Mode Solution for the Finite Deflections of a Circular Plate Loaded Impulsively”, Engineering Transactions, Vol. 29, Issues 1, pp. 99 - 114

 • Guedes Soares, C. and Soreide, T.H. (1983), “Behaviour and Design of Stiffened Plates Under Predominantly Compressive Loads”, International Shipbuilding Progress, Vol. 30, Issue 341, pp. 13-27

 • Guedes Soares, C. and Soreide, T.H. (1983), “Plastic Analysis of Laterally Loaded Circular Tubes”, Journal of Structural Engineering, Vol. 109, Issue 2, pp. 451-467

 • Guedes Soares, C. (1988), “Design Equation for the Compressive Strength of Unstiffened Plate Elements with Initial Imperfections”, Journal of Constructional Steel Research, Vol. 9, pp. 287-310

 • Guedes Soares, C. (1988), “A Code Requirement for the Compressive Strength of Plate Elements”, Marine Structures, Vol. 1, pp. 71-80

 • Guedes Soares, C. and Roque, R. (1991), “Analysis of Rule Designed Fishing Vessels in Fibre Reinforced Plastics”, Bulletin Association Technique Maritime et Aeronautique, Issue 91, pp. 461-490

 • Guedes Soares, C. (1992), “Design Equation for Ship Plate Elements under Uniaxial Compression”, Journal Constructional Steel Research, Vol. 22, pp. 99-114

 • Rodrigues, C., Lima,F.S., Ventura, M. and Guedes Soares, C. (1995), “The CADESNAV/-PC System for support to Ships’ Design and Production”, Shipbuilding in the Past and Present, Naval Architecture and Marine Engineering in Portugal" (in Portuguese), Shipbuilding in the Past and Present, Naval Architecture and Marine Engineering in Portugal (in Portuguese), Vol. X, Guedes Soares, C. (Ed.), Lisbon, pp. 10.1-10.13

 • Carvalho, A. and Guedes Soares, C. (1996), “Dynamic Response of Rectangular Plates of Composite Materials Subjected to Impact Loads”, Composite Structures, Vol. 34, pp. 55-63

 • Gordo, J.M. and Guedes Soares, C. (1996), “Collapse Strength of Rectangular Plates under Transverse Compression”, Journal of Constructional Steel Research, Vol. 36, Issue 3, pp. 215-234

 • Guedes Soares, C. and Gordo, J.M. (1996), “Compressive Strength of Rectangular Plates under Biaxial Load and The Lateral Pressure”, Thin-Walled Structures, Vol. 24, pp. 231-259

 • Gordo, J.M., Guedes Soares, C. and Faulkner, D. (1996), “Approximate Assessment of the Ultimate Longitudinal Strength of the Hull Girder”, Journal of Ship Research, Vol. 4, Issue 1, pp. 60-69

 • Gordo, J.M. and Guedes Soares, C. (1996), “Approximate Method to Evaluate the Hull Girder Collapse Strength", Marine Structures, Vol. 9, Issues 3-4, pp. 449-470

 • Carvalho, A. and Guedes Soares, C. (1996), “Dynamic Response of Rectangular Plates of Composite Materials Subjected to Impact Loads”, Composite Structures, Vol. 34, pp. 55-63

 • Ventura, M., Rodrigues, C. and Guedes Soares, C. (1996), “Development of a System for Computer-Aided Design of Ship Hulls” (In Portuguese), Ingenieria Naval, Issue 732, pp.52-60

 • Carvalho, A. and Guedes Soares, C. (1996), “Dynamic Response of Rectangular Plates of Composite Materials Subjected to Impact Loads”, Composite Structures, Vol. 34, pp. 55-63

 • Gordo, J.M. and Guedes Soares, C. (1997), “Interaction Equation for the Collapse of Tankers and Containerships under Combined Bending Moments”, Journal of Ship Research, Vol. 41, Issue 3, pp. 230-240

 • Gordo, J.M. and Guedes Soares, C. (1997), “Design Methods for Stiffened Plates Under Predominantly Uniaxial Compression", Marine Structures, Vol. 10, pp. 465-497

 • Guedes Soares, C., Gordo, J.M. and Teixeira, A.P. (1998), “Elasto-Plastic Behaviour of Plates Subjected to Heat Loads”, Journal of Constructional Steel Research, Vol. 45, Issue 2, pp. 179-198

 • Sutherland, L.S. and Guedes Soares, C. (1999), “Impact of Tests of Woven Roving E-Glass/Polyester Laminates", Journal of Composites Science and Technology, Vol. 59, pp. 1553-1567

 • Sutherland, L.S. and Guedes Soares, C. (1999), “Effects of Laminate Thickness and Reinforcement Type on the Impact Behaviour of E-Glass / Polyester Laminates", Journal of Composites Science and Technology, Vol. 59, pp. 2243-2260

 • Sutherland, L.S. and Guedes Soares, C. (1999), “Impact of Tests of Woven Roving E-Glass/Polyester Laminates, Journal of Composites Science and Technology, Vol. 59, pp. 1553-1567

 • Sutherland, L.S. and Guedes Soares, C. (1999), “Effects of Laminate Thickness and Reinforcement Type on the Impact Behaviour of E-Glass / Polyester Laminates", Journal of Composites Science and Technology, Vol. 59, pp. 2243-2260

 • Guedes Soares, C., Gordo, J.M. and Teixeira, A.P. (2000), “Design Equations for Plates Subjected to Heat Loads and Lateral Pressure", Marine Structures, Vol. 13, Issue 1, pp. 1-23

 • Guedes Soares, C. and Teixeira, A.P. (2000), “Strength of Plates Subjected To Localised Heat Loads", Journal of Constructional Steel Research, Vol. 53, pp. 335-358

 • Guedes Soares, C. and Teixeira, A.P. (2001), “Strength of Compressed Rectangular Plates Subjected to Lateral Pressure", Journal of Constructional Steel Research, Vol. 57, pp. 491-516

 • Ventura, M. and Guedes Soares, C. (2001), “Application of NURBS curves and surfaces to hull form modelling” (In Portuguese), Ingenium, Vol. 28, Issue 2, pp. 73-79

 • Gordo, J.M. and Guedes Soares, C. (2002), “Bending Tests on a Thin Wall Box Girder” (In Portuguese), Mecânica Experimental, Issue 8, pp. 55-65

 • Sutherland, L.S. and Guedes Soares, C. (2002), “Impact Behaviour of Low Fibre-Fraction Glass / Polyester Laminates”, Mecânica Experimental, Issue 7, pp. 53-59

 • Garbatov, Y., Rudan, S. and Guedes Soares, C. (2002), “Fatigue Damage of Structural Joints Accounting for Nonlinear Corrosion”, Journal of Ship Research, Vol. 46, Issue 4, pp. 289-298

 • Barradas Cardoso, J., Sousa, L.G., Castro, J.A. and Valido, A.J. (2002), “Optimal Design of Thin-Walled Composite Beam Structures”, Structural and Multidisciplinary Optimization, Volume 24, pp. 205-211

 • Sutherland, L.S. and Guedes Soares, C. (2002), “Impact Behaviour of Low Fibre-Fraction Glass / Polyester Laminates”, Mecânica Experimental, Issue 7, pp. 53-59

 • Barradas Cardoso, J., Sousa, L.G., Castro, J.A. and Valido, A.J. (2002), “Optimal Design of Thin-Walled Composite Beam Structures”, Structural and Multidisciplinary Optimization, Volume 24, pp. 205-211

 • Barradas Cardoso, J. and Valido, A.J. (2003), “Geometrically Nonlinear Composite Beam Structures: Design Sensitivity Analysis”, Engineering Optimization, Vol. 35, pp. 531-555

 • Barradas Cardoso, J. and Valido, A.J. (2003), “Geometrically Nonlinear Composite Beam Structures: Optimal Design”, Engineering Optimization, Vol. 35, Issue 5, pp. 553-560

 • Sun, H.-H. and Guedes Soares, C. (2003), “An Experimental Study of Ultimate Torsional Strength of a Ship-Type Hull Girder with a Large Deck Opening”, Marine Structures, Vol. 16, pp. 51-67

 • Sutherland, L. and Guedes Soares, C. (2003), “The Effects of Test Parameters on the Impact Response of Glass Reinforced Plastic using an Experimental Design Approach”, Composites Science & Technologies, Vol. 63, pp. 1-18

 • Rudan, S., Garbatov, Y. and Guedes Soares, C. (2003), “Fatigue Damage Assessment of Side Shell Longitudinals Based on Spectral Approach”, Croatian Journal of Shipbuilding, Vol. 51, Issue 3, pp. 227-234

 • Guedes Soares, C., Garbatov, Y. and Von Selle, H. (2003), “Fatigue Damage Assessment of Ship Structures Based on the Long-Term Distribution of Local Stresses”, International Shipbuilding Progress, Vol. 50, Issues 1-2, pp. 35-55

 • Garbatov, Y., Rudan, S. and Guedes Soares, C. (2004), “Assessment of Geometry Correction Functions of Tanker Knuckle Details Based on Fatigue Tests and Finite-Element Analysis”, Journal of Offshore Mechanics and Arctic Engineering, Vol. 126, pp. 220-226

 • Sutherland, L. and Guedes Soares, C. (2004), “Effect of Laminate Thickness and of Matrix Resin on the Impact of Low Fibre-Volume, Woven Roving E-Glass Composites", Composites Science and Technology, Vol. 64, pp. 1691-1700

 • Gordo, J.M. and Guedes Soares, C. (2004), “Experimental Evaluation of the Ultimate Bending Moment of a Box Girder”, Marine Systems and Ocean Technology, Vol. 1, Issue 1, pp. 33-46

 • Sutherland, L.S. and Guedes Soares, C. (2004), “Transverse Impact of Circular Marine Composite Plates”, Mecânica Experimental, Vol. 10, pp. 83-93

 • Sutherland, L. and Guedes Soares, C. (2004), “Effect of Laminate Thickness and of Matrix Resin on the Impact of Low Fibre-Volume, Woven Roving E-Glass Composites”, Composites Science and Technology, Vol. 64, pp. 1691-1700

 • Garbatov, Y., Rudan, S. and Guedes Soares, C. (2004), “Assessment of Geometry Correction Functions of Tanker Knuckle Details Based on Fatigue Tests and Finite-Element Analysis”, Journal of Offshore Mechanics and Arctic Engineering, Vol. 126, pp. 220-226

 • Sutherland, L.S. and Guedes Soares, C. (2004), “Transverse Impact of Circular Marine Composite Plates” , Mecânica Experimental, Vol. 10, pp. 83-93

 • Sutherland, L.S., Santos, F.M. and Guedes Soares, C. (2005), “Indentation of composites of ship application” (In Portuguese), Mecânica Experimental, Issue 11, pp. 35-45

 • Sutherland, L.S. and Guedes Soares, C. (2005), “Impact on Low Fibre-Volume, Glass / Polyester Rectangular Plates” , Composite Structures, Vol. 68, pp. 13-22

 • Rodrigues Branco, J.N. and Guedes Soares, C. (2005), “Mapping of Shell Plates of Double Curvature into Plane Surfaces”, Journal of Ship Production, Vol. 21, Issue 4, pp. 248-257

 • Sutherland, L.S., Santos, F.M. and Guedes Soares, C. (2005), “Indentation of composites of ship application" (In Portuguese), Mecânica Experimental, Issue 11, pp. 35-45

 • Sutherland, L.S. and Guedes Soares, C. (2005), “Impact on Low Fibre-Volume, Glass / Polyester Rectangular Plates”, Composite Structures, Vol. 68, pp. 13-22

 • Sutherland, L.S. and Guedes Soares, C. (2005), “Contact Indentation of Marine Composites”, Composite Structures, Vol. 70, pp. 287-294

 • Vitória, J. and Guedes Soares, C. (2005), “A Method for Automatic Nesting of Ship Plates”, Journal of Ship Production, Vol. 21, Issue 1, pp. 14-27

 • Sadovský, Z., Teixeira, A.P. and Guedes Soares, C.(2005), “Degradation of the Compressive Strength of Rectangular Plates due to Initial Deflection”, Twin-Walled Structures, Vol. 43, pp. 65-82

 • Sutherland, L.S. and Guedes Soares, C. (2005), “Impact Characterisation of Low Fibre-Volume Glass Reinforced Polyester Circular Laminated Plates”, International Journal of Impact Engineering, Vol. 31, pp. 1-23

 • Sutherland, L.S. and Guedes Soares, C. (2006), “Impact Behaviour of Typical Marine Composite Laminates”, Composites Part B: Engineering, Vol. 37, pp. 89-100

 • Sutherland, L.S., Rodrigues, B. and Guedes Soares, C. (2006) , “Design and commissioning of a portico with hydraulic actuator for structural testing” (In Portuguese), Mecânica Experimental, Vol. 12, pp. 1-9

 • Dimas, D.M. and Guedes Soares, C. (2006), “Experimental and numerical study of clamped beams under transverse impact in the mid-section" (in Portuguese), Mecânica Experimental, Vol. 12, pp. 11-22

 • Kamenov-Toshkov, L., Ivanov, L.D. and Garbatov, Y. (2006), “Wave-Induced Design Bending Moment Assessment for any given Ship's Operational Life", Ship and Offshore Structures, Vol. 1, Issue 3, pp. 221-227

 • Sadovský, Z., Teixeira, A.P. and Guedes Soares, C. (2006), “Degradation of the Compression Strength of Square Plates Due to Initial Deflection”, Journal of Constructional Steel Research, Vol. 62, pp. 369-377

 • Dimas, D.M. and Guedes Soares, C. (2006), “Experimental and numerical study of clamped beams subjected to impact in the mid-span” (In Portuguese), Mecânica Experimental, Vol. 12, pp. 11-22

 • Dimas, D.M. and Guedes Soares, C. (2006), “Experimental and numerical study of clamped beams under transverse impact in the mid-section" (in Portuguese), Mecânica Experimental, Vol. 12, pp. 11-22

 • Dimas, D.M. and Guedes Soares, C. (2006), “Experimental and numerical study of clamped beams subjected to impact in the mid-span” (In Portuguese), Mecânica Experimental, Vol. 12, pp. 11-22

 • Ventura, M. and Guedes Soares, C. (2007), “Application of STEP Technology to Ship Repair Data Management”, Journal of Ship Production, Vol. 23, Issue 4, pp. 231-237

 • Rizzo, C.M., Paik, J.K., Brennan, F., Carlsen, C.A., Daley, C., Garbatov, Y., Ivanov, L., Simonsen, B. C., Yamamoto, N. and Zhuang, H.Z. (2007), “Current practices and recent advances in condition assessment of aged ships”, Ship & Offshore Structure, Vol. 2, Issue 3, pp. 261-271

 • Sutherland, L.S. and Guedes Soares, C. (2007), “Scaling of Impact on Low Fibre-Volume Glass-Polyester Laminates”, Composites Part A, Vol. 38, pp. 307-317

 • Chen, N.-Z. and Guedes Soares, C. (2007), “Progressive Failure Analysis for Prediction of Post-buckling Compressive Strength of Laminated Composite Plates and Stiffened Panels”, Journal of Reinforced Plastics and Composites, Vol. 26, pp. 1021-1042

 • Chen, N.-Z. and Guedes Soares, C. (2007), “Longitudinal Strength Analysis of Ship Hulls of Composite Materials under Sagging Moments”, Composite Structures, Vol. 77, Issues 1, pp. 36-44

 • Luís, R.M., Witkowska, M. and Guedes Soares, C. (2008), “Ultimate Strength of Transverse Plate Assemblies under Uniaxial Loads”, Journal of Offshore Mechanics and Arctic Engineering, Vol. 130, pp. 021011-1 / 021011-7

 • Gordo, J.M. and Guedes Soares, C. (2008), “Compressive Tests on Short Continuous Panels”, Marine Structures, Vol. 21, pp. 113–137

 • Chakarov, K., Garbatov, Y. and Guedes Soares, C. (2008), “Fatigue Analysis of a Ship Deck Structure Accounting for Imperfections”, International Journal of Fatigue, Vol. 30, pp. 1881-1897

 • Guedes Soares, C., Luís, R.M., Nikolov, P., Dowes, J., Taczala, M., Modiga, M., Quesnel, T., Toderan, C. and Samuelides, M. (2008), “Benchmark study on the use of simplified structural codes to predict the ultimate strength of a damaged ship hull”, International Shipbuilding Progress, Vol. 55, pp. 87-107

 • Guedes Soares, C., Luís, R. M., Teixeira, A. P., Quesnel, T., Nikolov, P. I., Steen, E., Khan, I. A., Toderan, C., Olaru, V. D., Bollero, A. and Taczala, M. (2008), "Parametric Study on the Collapse Strength of Rectangular Plates with Localized Imperfections under In-plane Compression", International Shipbuilding Progress, Vol. 55, pp. 63-85

 • Chakarov, K., Garbatov, Y. and Guedes Soares, C. (2008), “Hot Spot Stress and Stress Concentration Factors due to Different Fabrication Imperfections in Deck Structures”, International Shipbuilding Progress, Vol. 55, pp. 47-62

 • Chen, N.-Z. and Guedes Soares, C. (2008), “Spectral Stochastic Finite Element Analysis for Laminated Composite Plates”, Computer Methods in Applied Mechanics and Engineering, Vol. 197, pp. 4830-4839

 • Chen, N.-Z. and Guedes Soares, C. (2008), “Ultimate Longitudinal Strength of Ship Hulls in Composite Materials”, Journal of Ship Research, Vol. 52, Issue 3, pp. 184-193

 • Fricke, W., Bollero, A., Chirica, I., Garbatov, Y., Jancart, F., Kahl, A., Remes, H., Rizzo, C. M., von Selle, H., Urban, A., and Wei, L. (2008), "Round Robin Study on Structural Hot-Spot and Effective Notch Stress Analysis", Ships and Offshore Structures, Vol. 3, Issue 4, pp. 335-345

 • Gordo, J.M. and Guedes Soares, C. (2008), “Experimental Evaluation of the Behaviour of a Mild Steel Box Girder under Bending Moment”, Ships and Offshore Structures, Vol. 3, Issue 4, pp. 347-358

 • Barreiros, A. and Barradas Cardoso, J. (2008), "A new approach to solve stochastic programming problems with recourse", Engineering Optimization, Vol. 40, Issue 5, pp. 475-488

 • Cardoso, J.B., Moita, P.P. and Valido, A.J. (2008), "Design and Control of Non-Linear Mechanical Systems for Minimum Time", Shock and Vibration Journal, Vol. 15, Issues 3-4, pp. 315-324

 • Moita, P.P., Cardoso, J.B. e Valido, A.J. (2008), "A Space-Time Finite Element Model for Design and Control Optimization of Non-Linear Dynamic Response", Shock and Vibration Journal, Vol. 15, Issues 3-4, pp. 307-314

 • Gordo, J.M. and Guedes Soares, C. (2008), “Compressive Tests on Short Continuous Panels”, Marine Structures, Vol. 21, pp. 113–137

 • Chen, N.-Z. and Guedes Soares, C. (2008), “Spectral Stochastic Finite Element Analysis for Laminated Composite Plates”, Computer Methods in Applied Mechanics and Engineering, Vol. 197, pp. 4830-4839

 • Chen, N.-Z. and Guedes Soares, C. (2008), “Ultimate Longitudinal Strength of Ship Hulls in Composite Materials”, Journal of Ship Research, Vol. 52, Issue 3, pp. 184-193

 • Gordo, J.M. and Guedes Soares, C. (2008), “Experimental Evaluation of the Behaviour of a Mild Steel Box Girder under Bending Moment”, Ships and Offshore Structures, Vol. 3, Issue 4, pp. 347-358

 • Gordo, J.M. and Guedes Soares, C. (2008), “Experimental Evaluation of the Behaviour of a Mild Steel Box Girder under Bending Moment”, Ships and Offshore Structures, Vol. 3, Issue 4, pp. 347-358

 • Guedes Soares, C., Luís, R.M., Teixeira, A.P., Quesnel, T., Nikolov, P.I., Steen, E., Khan, I.A., Toderan, C., Olaru, V.D., Bollero, A. and Taczala, M. (2008), “Parametric Study on the Collapse Strength of Rectangular Plates with Localized Imperfections under Inplane Compression”, International Shipbuilding Progress, Vol. 55, pp. 63-85

 • Gordo, J.M. and Guedes Soares, C. (2009), “Tests on Ultimate Strength Hull Box Girders Made of High Tensile Steel”, Marine Structures, Vol. 22, N.º 4, pp. 770-790

 • Gordo, J.M. and Guedes Soares, C. (2009), "Tests on Ultimate Strength Hull Box Girders Made of High Tensile Steel", Marine Structures, Vol. 22, Issue 4, pp. 770-790

 • Oktem, A.S. and Chaudhuri, R.A. (2009), “Higher-order theory based boundary-discontinuous Fourier analysis of simply supported thick cross-ply doubly curved panels”, Composite Structures, Vol. 89, pp. 448-458

 • Barradas Cardoso, J.E., Benedito, N.M.B. and Valido, A.J. (2009), “Finite element analysis of thin-walled composite laminated beams with geometrically nonlinear behaviour including warping deformation”, Thin-Walled Structures, Vol. 47, Issue 11, pp. 1363-1372

 • Jiang, X. and Guedes Soares, C. (2009), “Nonlinear FEM analysis of pitted mild steel square plates subjected to In-plane compression”, Journal of Ship Mechanics, Vol. 13, Issue 3, pp. 399-405

 • Garbatov, Y., Rudan, S. and Guedes Soares, C. (2010), “Fatigue Assessment of Welded Trapezoidal Joints of Very Fast Ferry Subjected to Combined Load”, Engineering Structures, Vol. 32, pp. 800-807

 • Garbatov, Y., Rudan, S. and Guedes Soares, C. (2010), “Fatigue Assessment of Welded Trapezoidal Joints of Very Fast Ferry Subjected to Combined Load”, Engineering Structures, Vol. 32, pp. 800-807

 • Barradas Cardoso, J., Moita, P.P. and Valido, A.J. (2010), “Multicriteria Oprimization of Injury Prevention Systems to Impact” , Shock and Vibration, Volume 17, pp. 641-649

 • Moita, P.P., Barradas Cardoso, J.B. and Barreiros, A. (2011), “Optimal Design and Control of Mechanical Systems with Uncertain Input”, Proceeding of the International Conference on Structural Engineering Dynamics (ICEDyn 2011), 20-22 June, Tavira, Portugal

 • Gaspar, B., Garbatov, Y. and Guedes Soares, C. (2011), ), “Effect of weld shape imperfections on the structural hot-spot stress distribution”, Ships and Offshore Structures, Vol. 6, Nº. 1-2, pp.145-160

 • Saad-Eldeen, S., Garbatov, Y. and Guedes Soares, C. (2011), “Corrosion Dependent Ultimate Strength Assessment of Aged Box Girders Based on Experimental Results”, Transactions of the Society of Naval Architects and Marine Engineers, Vol. 119, pp. 591-602

 • Saad-Eldeen, S., Garbatov, Y. e Guedes Soares, C. (2011), “Corrosion-Dependent Ultimate Strength Assessment of Aged Box Girders Based on Experimental Results”, Journal of Ship Research, Vol. 55, Issue 4, pp. 289-300

 • Saad-Eldeen, S., Garbatov, Y. and Guedes Soares, C. (2011), “Compressive Strength Assessment of a Moderately Corroded Box Girder”, Marine Systems & Ocean Technology, Vol. 6(1), pp. 27-37

 • Saad-Eldeen, S., Garbatov, Y. and Guedes Soares, C. (2011), “Corrosion Dependent Ultimate Strength Assessment of Aged Box Girders Based on Experimental Results”, Transactions of the Society of Naval Architects and Marine Engineers, Vol. 119, pp. 591-602

 • Chen, B.Q., Garbatov, Y. and Guedes Soares, C. (2011), “Measurement of weld induced deformations in three-dimensional structures based on photogrammetry technique”, Journal of Ship Production and Design, Vol. 27, Nº. 2, pp. 51-62

 • Barradas Cardoso, J. and Valido, A.J. (2011), “Cross-Section Optimal Design of Composite Laminated Thin-Walled Beams”, Computers and Structures, Vol. 89 (11-12), pp. 1069-1076

 • Mantari, J.L., Oktem, A.S. and Guedes Soares, C. (2011), “Static and dynamic analysis of laminated composite and sandwich plates and shells by using a new higher-order shear deformation theory”, Composite Structures, Vol. 94(1), pp. 37-49

 • Villavicencio, R. and Guedes Soares, C. (2011), “Numerical modelling of the boundary conditions on beams stuck transversely by a mass”, ”, International Journal of Impact Engineering, Vol. 38(5), pp. 384-396

 • Gordo, J.M. and Guedes Soares, C., (2011), “Compressive Tests on Stiffened Panels of Intermediate Slenderness”, Thin-Walled Structures, Vol 49, Issue 6, pp. 782-794

 • Oktem, A.S. and Guedes Soares, C. (2011), “Boundary Discontinuous Fourier Solution for Plates and Doubly Curved Panels Using a Higher Order Theory”, Composites: Part B: Engineering, Vol 42, Issue 4, pp. 842-850

 • Varela, J.M., Ventura, M. and Guedes Soares, C. (2011), “Product Data Model of Hull Structures and Digital Prototyping System for Basic Structural Design”, Ships and Offshore Structures, Vol. 6, Issue 1-2, pp. 3-14

 • Gaspar, B., Garbatov, Y. and Guedes Soares, C. (2011), “Effect of weld shape imperfections on the structural hot-spot stress distribution”, Ships and Offshore Structures, Vol. 6, Nº. 1-2, pp.145-160

 • Saad-Eldeen, S., Garbatov, Y. and Guedes Soares, C. (2011), “Experimental Assessment of the Ultimate Strength of a Box Girder Subjected to Severe Corrosion”, Marine Structures, Vol. 24, Issue 4, pp. 338-357

 • Chen, B.Q., Garbatov, Y. and Guedes Soares, C. (2011), “Measurement of weld induced deformations in three-dimensional structures based on photogrammetry technique”, Journal of Ship Production and Design, Vol 27, No. 2, pp. 51-62

 • Chen, N.-Z., Wang, G. and Guedes Soares, C. (2011), “Palmgren-Miner’s Rule and Fracture Mechanics-Based Inspection Planning”, Engineering Fracture Mechanics, Vol. 78, Issue 18, pp. 3166-3182

 • Saad-Eldeen, S., Garbatov, Y. and Guedes Soares, C. (2011), “Corrosion-Dependent Ultimate Strength Assessment of Aged Box Girders Based on Experimental Results”, Journal of Ship Research, Vol. 55, Issue 4, pp. 289-300

 • Saad-Eldeen, S., Garbatov, Y. and Guedes Soares, C. (2011), “Compressive Strength Assessment of a Moderately Corroded Box Girder”, Marine Systems & Ocean Technology, Vol. 6(1), pp. 27 -37

 • Jiang, X. and Guedes Soares, C. (2012), “Ultimate capacity of rectangular plates with partial depth pits under uniaxial loads”, Marine Structures, Vol. 26, pp. 27-41

 • Oktem, A.S. and Guedes Soares, C. (2012), “Higher-Order Theory Based Fourier Analysis of Cross-Ply Plates and Doubly Curved Panels”, Journal of Composite Materials, Vol. 46(21), pp. 2675-2694

 • Mantari, J.L., Oktem, A.S. and Guedes Soares, C. (2012), “Bending and free vibration analysis of isotropic and multilayered plates and shells by using a new accurate higher-order shear deformation theory”, Composites: Part B, Vol. 43, pp. 3348-3360

 • Villavicencio, R., Sutherland, L.S. and Guedes Soares, C. (2012), “Numerical simulation of transversely impacted, clamped circular aluminium plates”, Ships and Offshore Structures, Vol. 7(1), pp. 31-45

 • Xu, M.C. and Guedes Soares, C. (2012), “Numerical assessment of experiments on the ultimate strength of stiffened panels”, Engineering Structures, Vol. 45, pp. 460-471

 • Garbatov, Y. and Guedes Soares, C. (2012), “Uncertainty Assessment of Fatigue Damage of Welded Ship Structural Joints”, Engineering Structures, Vol. 44, pp. 322-333

 • Sutherland, L. S. and Guedes Soares, C. (2012), “The use of quasi-static testing to obtain the low-velocity impact resistance of Marine GRP laminates”, Composites Part B, Vol. 43, pp. 1459-1467

 • Mantari, J.L., Oktem, A.S. and Guedes Soares, C. (2012), “A new higher order shear deformation theory for sandwich and composite laminated plates”, Composites Part: B, Vol. 43, Issue 3, pp. 1489-1499

 • Villavicencio, R. and Guedes Soares, C. (2012), “Numerical modelling of laterally impacted plates reinforced by free and end connected stiffeners”, Engineering Structures, Vol. 44, pp. 46-62

 • Jiang, X. and Guedes Soares, C. (2012), “A closed form formula to predict the ultimate capacity of pitted mild steel plate under biaxial compression”, Thin Walled Structures, Vol. 59, pp. 27-34

 • Nguyen, K.T., Garbatov, Y. and Guedes Soares, C. (2012), “Fatigue Damage Assessment of Corroded Oil Tanker Details Based on Global and Local Stress Approaches”, International Journal of Fatigue, Vol. 43, pp. 197-206

 • Mantari, J.L. and Guedes Soares, C. (2012), “Analysis of isotropic and multilayered plates and shells by using a generalized higher-order shear deformation theory”, Composite Structures, Vol. 94, pp. 2640-2656

 • Mantari, J.L. and Guedes Soares, C. (2012), “Generalized hybrid quasi-3D shear deformation theory for the static analysis of advanced composite plates”, Composite Structures, Vol. 94, pp. 2561-2575

 • Mantari, J.L., Oktem, A.S. and Guedes Soares, C. (2012), “A new trigonometric shear deformation theory for isotropic, laminated composite and sandwich plates”, International Journal of Solids and Structures, Vol. 49, pp. 43-53

 • Mantari, J.L., Oktem, A.S. and Guedes Soares, C. (2012), “A new trigonometric layerwise shear deformation theory for the finite element analysis of laminated composite and sandwich plates”, Computers and Structures, Vol. 94-95, pp. 45-53

 • Oktem, A.S., Mantari, J.L. and Guedes Soares, C. (2012), “Static response of functionally graded plates and doubly-curved shells based on a higher order shear deformation theory”, European journal of mechanics A/Solids, volume: 36, pp. 163-172

 • Mantari, J.L. and Guedes Soares, C. (2012), "Bending analysis of thick exponentially graded plates using a new trigonometric higher order shear deformation theory", Composite Structures, Vol. 94, pp. 1991-2000

 • Mantari, J.L., Oktem, A.S. and Guedes Soares, C. (2012),, “Bending response of functionally graded plates by using a new higher order shear deformation theory”, Composite Structures, volume: 94, pp. 714-723

 • Saad-Eldeen, S., Garbatov, Y. and Guedes Soares, C. (2012), “Analysis of Plate Deflections during Ultimate Strength Experiments of Corroded Box Girders”, Thin-Walled Structures, Vol. 54, pp. 164-176

 • Xu, M.C. and Guedes Soares, C. (2012), “Assessment of the ultimate strength of narrow stiffened panel test specimens”, Thin-walled structures, vol. 55, pp. 11-21

 • Mantari, J.L., Oktem, A.S. e Guedes Soares, C. (2012), “Bending and free vibration analysis of isotropic and multilayered plates and shells by using a new accurate higher-order shear deformation theory”, Composites: Part B, Vol. 43, pp. 3348-3360

 • Oktem, A.S. and Guedes Soares, C. (2012), “Analysis of the Static Response of Cross-Ply Simply Supported Plates and Shells Based on a Higher-Order Theory”, Mechanics of Composite Materials, Vol. 48(1), pp. 65-76

 • Gordo, J.M. and Guedes Soares, C. (2012), “Compressive Tests on Long Continuous Stiffened Panels”, Journal of Offshore Mechanics and Arctic Engineering, Vol. 134, pp. 021403-1 - 021403-8

 • Saad-Eldeen, S., Garbatov, Y. and Guedes Soares, C. (2012), “Effect of corrosion degradation on the ultimate strength of steel box girders”, Corrosion Engineering, Science & Technology, Vol. 47(4), pp. 272-283

 • Ventura, M. and Guedes Soares, C. (2012), “Surface Intersection in Geometric Modeling of Ships’ Hulls”, Journal of Marine science and Technology, Vol. 17, pp. 114-124

 • Xu, M.C. and Guedes Soares, C. (2012), “Numerical study of the effect of geometry and boundary conditions on the collapse behaviour of stocky stiffened panels”, International Journal of Maritime Engineering, Vol. 154, pp. A-67 - A-77

 • Moita, P.P., Cardoso, J.B. and Barreiros, A. (2012), “Optimal design and control of mechanical systems with uncertain input”, Journal of Shock and Vibration, Vol. 19(5), pp. 1019-1025

 • Gordo, J. M. and Guedes Soares, C. (2012), “Compressive Tests on Long Continuous Stiffened Panels”, Journal of Offshore Mechanics and Arctic Engineering, Vol. 134, pp. 021403-1

 • Sutherland, L. S. and Guedes Soares, C. (2012), “The use of quasi-static testing to obtain the low-velocity impact resistance of Marine GRP laminates”, Composites Part B, Vol. 43, pp. 1459-1467

 • Villavicencio, R. and Guedes Soares, C. (2012), “Numerical plastic response and failure of a pre-notched transversely impacted beam”, Ships and Offshore Structures, Vol. 7, N.º 4, pp. 417-429

 • Liu, B., Villavicencio, R. and Guedes Soares, C. (2013), “Experimental and Numerical Plastic Response and Failure of Laterally Impacted Rectangular Plates”, Journal of Offshore Mechanics and Arctic Engineering, Vol. 135, pp. 041602-1 - 041602-7

 • Parunov, J, Gledic, I., Garbatov, Y. and Guedes Soares, C. (2013), “Fatigue assessment of corroded deck longitudinals of tankers”, International Journal of Maritime Engineering, Vol. 155(Part A1), pp. 9-21

 • Villavicencio, R. and Guedes Soares, C. (2013), “Impact response of rectangular and square stiffened plates supported on two opposite edges”, Thin Walled Structures, Vol. 68, pp. 164-182

 • Jiang, X. and Guedes Soares, C. (2013), “Ultimate Compressive Capacity of Rectangular Plates with Partial Depth Pits”, Journal of Offshore Mechanics and Arctic Engineering, Volume 135, pp. 021401-1~021401-6

 • Xu, M.C. and Guedes Soares, C., (2013), “Experimental Study on the Collapse Strength of Narrow Stiffened Panels”, Journal of Offshore Mechanics and Arctic Engineering, Volume 135, pp. 021402-1~021402-10

 • Ventura, M. and Guedes Soares, C. (2013), “Modelling Stiffeners of Ship Hull Structures”, Journal of Engineering for the Maritime Environment, Vol. 227, Issue 2, pp. 155-166

 • Mantari, J.L. and Guedes Soares, C. (2013), “Generalized layerwise HSDTs and finite element formulation for symmetric laminated and sandwich composite plates”, Composite Structures, Volume 105, pp. 319-331

 • Teixeira, A.P., Guedes Soares, C., Chen, N.Z. and Wang, G. (2013), “Uncertainty analysis of load combination factors for global longitudinal bending moments of double hull tankers”, Journal of Ship Research, Vol. 57(1), pp. 42-58

 • Xu, M.C., Yanagihara, D., Fujikubo, M. and Guedes Soares, C. (2013), “Influence of boundary condition on the collapse behaviour of stiffened panels under combined loads”, Marine Structures, Vol. 34, pp. 205-225

 • Chaudhuri, R.A., Oktem, A.S. and Guedes Soares, C. (2013), “Internally Pressurized Thin Unsymmetric Cross-Ply Cantilever Cylindrical Shells”, AIAA Journal, Vol. 51(10), pp. 2523-2526

 • Fricke, W., Codda, M., Feltz, O., Garbatov, Y., Remes, H., Risso, G., Rizzo, C. e Romanoff, J. (2013) Fricke, W., Codda, M., Feltz, O., Garbatov Fricke, W., Codda, M., Feltz, O., Garbatov, Y., Remes, H., Risso, G., Rizzo, C. and Romanoff, J. (2013), “Round robin study on local stress and fatigue assessment of lap joints and doubler plates”“Round robin study on local stress and fatigue assessment of lap joints and doubler plates”, Ships and Offshore Structures, Volume 8, pp. 621-627

 • Saad-Eldeen, S., Garbatov, Y. and Guedes Soares, C. (2013), “Experimental assessment of corroded steel box-girders subjected to uniform bending”, Ships and Offshore Structures, Volume 8, pp. 653-662

 • Villavicencio, R., Liu, Z., Amdahl, J. and Guedes Soares, C. (2013), “Influence of the neutral axis displacement on the residual strength of a damaged tanker double bottom structure”, Ships and Offshore Structures, Volume 8, pp. 663-674

 • Xu, M.C., Fujikubo, M. and Guedes Soares, C. (2013), “Influence of model geometry and boundary conditions on the ultimate strength of stiffened panels under uniaxial compressive loading”, Journal of Offshore Mechanics and Arctic Engineering, Volume 135, pp. 041603-1~041603-10

 • Mantari, J.L. and Guedes Soares, C. (2013), “Finite element formulation of a generalized higher order shear deformation theory for advanced composite plates”, Composite Structure, Volume 96, pp. 545-553

 • Xu, M.C., Yanagihara, D., Fujikubo, M. and Guedes Soares, C. (2013), “Influence of boundary condition on the collapse behaviour of stiffened panels under combined loads”, Marine Structures, Volume 34, pp. 204-225

 • Liu, B., Villavicencio, R. and Guedes Soares, C. (2013), “Experimental and Numerical Plastic Response and Failure of Laterally Impacted Rectangular Plates”, Journal of Offshore Mechanics and Arctic Engineering, Vol. 135, pp. 041602-1 - 041602-7

 • Villavicencio, R., Kim, Y-H., Cho, S-R. and Guedes Soares, C. (2013), “Deformation process of web girders in small-scale tanker double hull structures subjected to lateral impact”, Marine Structures, Vol. 32, pp. 84-112

 • Liu, B., Villavicencio, R. and Guedes Soares, C. (2013), “Experimental and numerical plastic response and failure of pre-notched transversely impacted beams”, International Journal of Mechanical Sciences, Volume 77, pp. 314-332

 • Edalat, P., Khedmati, M.R. and Guedes Soares, C. (2013), “Free Vibration and Dynamic Response Analysis of Stiffened Parabolic Shells using the Equivalent Orthotropic Shell Parameters” , Latin American Journal of Solids and Structures, Vol. 10, pp. 747-766

 • Saad-Eldeen, S., Garbatov, Y. and Guedes Soares, C. (2013), “Ultimate Strength Assessment of Corroded Box Girders”, Ocean Engineering, Vol. 58, pp. 35-47

 • Xu, M.C., Garbatov, Y. and Guedes Soares, C. (2013), “Ultimate Strength Assessment of a Storage Tank Hull Based on Experimentally Developed Master Curves”, Journal of Marine Science Application, Volume 12, pp. 127-139

 • Chaudhuri, R.A., Oktem, A.S. and Guedes Soares, C. (2013), “Stress Concentration/Intensity around Elliptical/Circular Cylinder Shaped Surface Flaws in Thin Cross-Ply Plates and St. Venant’s Principle”, Applied Mathematical Modelling, Vol. 37, pp. 1362-1377

 • Teixeira, A.P., Guedes Soares, C., Chen, N.Z. and Wang, G. (2013), “Uncertainty analysis of load combination factors for global longitudinal bending moments of double hull tankers”, Journal of Ship Research, Vol. 57(1), pp. 42-58

 • Xu, M.C. and Guedes Soares, C. (2013), “Comparisons of calculations with experiments on the ultimate strength of wide stiffened panels”, Marine Structure, Volume 31, pp. 82-101

 • Xu, M.C. and Guedes Soares, C. (2013), “Experimental study on the collapse strength of wide stiffened panels”, Marine Structures, Vol. 30, pp. 33-62

 • Saad-Eldeen, S., Garbatov, Y. and Guedes Soares, C. (2013), “Effect of Corrosion Severity on the Ultimate Strength of a Steel Box Girder”, Engineering Structures, Volume 49, pp. 560-571

 • Xu, M.C. and Guedes Soares, C. (2013), “Assessment of the residual ultimate strength of wide dented stiffened panels subjected to compressive loads”, Engineering Structures, Vol. 49, pp. 316-328

 • Nguyen, K.T., Garbatov, Y. and Guedes Soares, C. (2013), “Spectral Fatigue Damage Assessment of Tanker Deck Structural Detail Subjected to Time-Dependent Corrosion”, International Journal of Fatigue, Volume 48, pp. 147-155

 • Chaudhuri, R.A., Oktem, A.S. and Guedes Soares, C. (2013), “Stress Concentration/Intensity around Elliptical/Circular Cylinder Shaped Surface Flaws in Thin Cross-Ply Plates and St. Venant’s Principle”, Applied Mathematical Modelling, Volume 37, pp. 1362-1377

 • Oktem, A.S., Alankaya, V. and Guedes Soares, C. (2013), “Boundary-Discontinuous Fourier Analysis of Simply Supported Cross-Ply Plates”, Applied Mathematical Modelling, Volume 37, pp. 1378-1389

 • Mantari, J.L. and Guedes Soares, C. (2013), “Finite element formulation of a generalized higher order shear deformation theory for advanced composite plates”, Composite Structure, Volume 96, pp. 545-553

 • Mantari, J.L. and Guedes Soares, C. (2013), “A novel higher-order shear deformation theory with stretching effect for functionally graded plates”, Composite: part B, Volume 45, pp. 268-281

 • Xu, M.C. and Guedes Soares, C., (2013), “Experimental Study on the Collapse Strength of Narrow Stiffened Panels”, Journal of Offshore Mechanics and Arctic Engineering, Vol. 135, pp. 021402-1 - 021402-10

 • Mantari, J.L., Granados, E.V. and Guedes Soares, C. (2014), “Vibrational analysis of advanced composite plates resting on elastic foundation”, Composites Part B, Vol. 66, pp. 407-419

 • Mantari, J.L. and Guedes Soares, C. (2014), “A trigonometric plate theory with 5-unknows and stretching effect for advanced composite plates”, Composite Structures, Vol. 107, pp. 396-405

 • Mantari, J.L. and Guedes Soares, C. (2014), “Optimized sinusoidal higher order shear deformation theory for the analysis of functionally graded plates and shells”, Composites Part B, Vol. 56, pp. 126-136

 • Garbatov, Y., Guedes Soares, C. and Parunov, J. (2014), “Fatigue strength experiments of corroded small scale steel specimens”, International Journal of Fatigue, Vol. 59, pp. 137-144

 • Saad-Eldeen, S., Garbatov, Y. and Guedes Soares, C. , “Strength Assessment of a Severely Corroded Box Girder Subjected to Bending Moment”, Journal of Constructional Steel Research, Vol. 92, pp. 90-102

 • Mantari, J.L. and Guedes Soares, C. (2014) , “Static response of advanced composite plates by a new non-polynomial higher-order shear deformation theory”, International Journal of Mechanical Sciences, Vol. 78, pp. 60-71

 • Mantari, J.L. and Guedes Soares, C. (2014) , “Four-unknowns quasi-3D shear deformation theory for advanced composite plates”, Composite Structures, Vol. 109, pp. 231-239

 • Mantari, J.L., Bonilla, E.M. and Guedes Soares, C. (2014) , “A new tangential-exponential higher order shear deformation theory for advanced composite plates”, Composites Part B, Vol. 60, pp. 319-328

 • Adak, M. and Guedes Soares, C. (2014), “Effects of Different Restraints on the Weld Induced Residual Deformations and Stresses in a Steel Plate”, International Journal of Advanced Manufacturing Technology, Vol. 71, pp. 699-710

 • Cubells, A., Garbatov, Y. and Guedes Soares, C. (2014), “Photogrammetry measurements of initial imperfections for the ultimate strength assessment of plates”, International Journal of Maritime Engineering, Vol. 156 (PartA4), pp. A-291 - A-302

 • Mantari, J.L., Granados, E.V. and Guedes Soares, C. (2014), “Vibrational analysis of advanced composite plates resting on elastic foundation”, Composites Part B, Vol. 66, pp. 407-419

 • Edalat, P., Khedmati, M.R. and Guedes Soares, C. (2014), “Free Vibration Analysis of Open Thin Deep Shells with Variable Radii of Curvature”, Meccanica, Vol. 49, pp. 1385-1405

 • Xu, M.C., Garbatov, Y. and Guedes Soares, C. (2014), “Residual ultimate strength assessment of stiffened panels with locked cracks”, Thin Walled Structures, Vol. 85, pp. 398-410

 • Garbatov, Y., Guedes Soares, C., Parunov, J. and Kodvanj, J. (2014), “Tensile strength assessment of corroded small scale specimen”, Corrosion Science, Vol. 85, pp. 296-303

 • Chen, B.Q., Hashemzadeh, M. and Guedes Soares, C. (2014), “Numerical and experimental studies on temperature and distortion patterns in butt-welded plates”, Int. Journal Advanced Manufacturing Technology, Vol. 72, pp. 1121-1131

 • Gordo, J.M. and Guedes Soares, C. (2014), “Experimental analysis of the effect of the frame spacing variation on the ultimate bending moment of box girders”, Marine Structures, Vol. 37, pp. 111-134

 • Villavicencio, R., Liu, B. and Guedes Soares, C. (2014), “Experimental and numerical analysis of a tanker side panel laterally punched by a knife edge indenter”, Marine Structures, Vol. 37, pp. 173-202

 • Mantari, J.L., Granados, E.V., Hinostroza, M.A. and Guedes Soares, C. (2014) , “Modelling advanced composite plates resting on elastic foundation by using a quasi-3D hybrid type HSDT”, Composite Structures, Vol. 118, pp. 455-471

 • Mantari, J.L., Bonilla, E.M. and Guedes Soares, C. (2014) , “A new tangential-exponential higher order shear deformation theory for advanced composite plates”, Composites Part B, Vol. 60, pp. 319-328

 • Mantari, J.L. and Guedes Soares, C. (2014) , “Four-unknowns quasi-3D shear deformation theory for advanced composite plates”, Composite Structures, Vol. 109, pp. 231-239

 • Mantari, J.L., Granados, E.V., Hinostroza, M.A. and Guedes Soares, C. (2014), “Modelling advanced composite plates resting on elastic foundation by using a quasi-3D hybrid type HSDT”, Composite Structures, Vol. 118, pp. 455-471

 • Mantari, J.L., Granados, E.V. e Guedes Soares, C. (2014), “Experimental and Numerical Plastic Response and Failure of Laterally Impacted Rectangular Plates”, Composites Part B, Vol. 66, pp. 407-419

 • Jurisic, P., Parunov, J. and Garbatov, Y. (2014), “Comparative analysis based on two non-linear corrosion models commonly used for prediction of structural degradation of oil tankers”, Transactions of Famena XXXVIII, Vol. 2, pp. 21-30

 • Liu, B., Villavicencio, R. and Guedes Soares, C. (2014) , “On the failure criterion of aluminum and steel plates subjected to low-velocity impact by a spherical indenter”, International Journal of Mechanical Sciences, Vol. 80, pp. 1-15

 • Mantari, J.L. and Guedes Soares, C. (2014), “A trigonometric plate theory with 5-unknows and stretching effect for advanced composite plates”, Composite Structures, Vol. 107, pp. 396-405

 • Mantari, J.L. and Guedes Soares, C. (2014) , “Static response of advanced composite plates by a new non-polynomial higher-order shear deformation theory”, International Journal of Mechanical Sciences, Vol. 78, pp. 60-71

 • Gordo, J.M. and Guedes Soares, C. (2015), “Experimental Evaluation of the Ultimate Bending Moment of a Slender Thin-Walled Box Girder”, Journal of Offshore Mechanics and Arctic Engineering, Vol. 137, pp. 021604-1 - 021604-7

 • Saad-Eldeen, S., Garbatov, Y. and Guedes Soares, C. (2015) , “Stress-strain analysis of dented rectangular plates subjected to uni-axial compressive load”, Engineering Structures, Vol. 99, pp. 78-91

 • Liu, B. and Guedes Soares, C. (2015), “Simplified analytical method for evaluating web girder crushing during ship collision and grounding”, Marine Structures, Vol. 42, pp. 71-94

 • Chaudhuri, R.A., Oktem, A.S. and Guedes Soares, C. (2015), “Beam-Column and Tie-Bar Effects in Internally Pressurized Thin Arbitrarily Laminated Cantilever Cylindrical Shells”, Journal of Engineering Mechanics, 2015, Vol. 141, pp. 04014131-1 - 04014131-13

 • Chen, B.Q., Hashemzadeh, M., Garbatov, Y. and Guedes Soares, C. (2015), “Numerical and Parametric Modeling and Analysis of Weld-induced Residual Stresses”, International Journal of Mechanics and Materials in Design, Vol. 11, pp. 439-453

 • Chaudhuri, R.A., Oktem, A.S. and Guedes Soares, C. (2015), “Levy-Type Boundary Fourier Analysis of Thick Clamped Hyperbolic-Paraboloidal Cross-ply Panels”, AIAA Journal, Vol. 53(1), pp. 140-149

 • Chaudhuri, R.A., Oktem, A.S. and Guedes Soares, C. (2015), “Levy-Type Boundary Fourier Analysis of Thick Cross-ply Panels with Negative Gaussian Curvature”, Composites Part B, Vol. 53(9), pp. 2492-2503

 • Li, XB. and Guedes Soares, C. (2015), “Spectral finite element analysis of in-plane free vibration of laminated composite shallow arches”, Composite Structures, Vol. 132, pp. 484-494

 • Xu, M.C. and Guedes Soares, C. (2015), “Effect of a central dent on the ultimate strength of narrow stiffened panels under axial compression”, International Journal of Mechanical Sciences, Vol. 100, pp. 68-79

 • Hashemzadeh, M., Chen, B.Q. and Guedes Soares, C. (2015), “Numerical and Experimental Study on Butt Weld with Dissimilar Thickness of thin Stainless Steel Plate”, International Journal of Advanced Manufacturing Technology, 2015, Vol. 78, pp. 319-330

 • Liu, B., Villavicencio, R. and Guedes Soares, C. (2015), “Shear and tensile failure of thin aluminium plates struck by cylindrical and spherical indenters”, Ships and Offshore Structures, Vol. 10(1), pp. 45-48

 • Mantari, J.L. and Guedes Soares, C. (2015), “A quasi-3D tangential shear deformation theory with four unknowns for functionally graded plates”, Acta Mechanica, Vol. 226, pp. 625-642

 • Witkowska, M. and Guedes Soares, C. (2015), “Ultimate Strength of Locally Damaged Panels”, Thin Walled Structures, 2015, Vol. 97, pp. 225-240

 • Yeter, B., Garbatov, Y. and Guedes Soares, C. (2015), “Fatigue damage assessment of fixed offshore wind turbine tripod support structures”, Engineering Structures, Vol. 101, pp. 518-528

 • Liu, B., Villavicencio, R. and Guedes Soares, C. (2015), “Influence of striker shape on the crack initiation and propagation on laterally impacted thin aluminium plates”, Journal of Offshore Mechanics and Arctic Engineering, Vol. 137, pp. 051402-1 - 051402-10

 • Tekgoz, M., Garbatov, Y. and Guedes Soares, C. (2015), “Ultimate strength assessment of welded stiffened plates”, Engineering Structures, Vol. 84, pp. 325-339

 • Liu, B., Villavicencio, R. and Guedes Soares, C. (2015) , “Simplified analytical method to evaluate tanker side panels during minor collision incidents”, International Journal of Impact Engineering, Vol. 78, pp. 20-33

 • Liu, B., Villavicencio, R. and Guedes Soares, C. (2015), “Simplified method for quasi-static collision assessment of a damaged tanker side panel”, Marine Structures, Vol. 40, pp. 267-288

 • Gordo, J.M. (2015), “Effect of Initial Imperfections on the Strength of Restrained Plates”, Journal of Offshore Mechanics and Arctic Engineering, Vol. 137, pp. 051401-1 - 051401-9

 • Mantari, J.L. and Guedes Soares, C. (2015), “Five-unknowns generalized hybrid-type quasi-3D HSDT for advanced composite plates”, Applied Mathematical Modelling, Vol. 39, pp. 5598-5615

 • Liu, B. and Guedes Soares, C. (2015), “Plastic response and failure of rectangular cross-section tubes subjected to transverse quasi-static and low-velocity impact loads”, International Journal of Mechanical Sciences, Vol. 90, pp. 213-227

 • Kharghani, N. and Guedes Soares, C. (2015), “Influence of different parameters on the deflection of composite laminates containing through-the-width delamination using Layerwise HSDT”, Composite Structures, Vol. 132, pp. 341-349

 • Edalat, P., Khedmati, M.R. and Guedes Soares, C. (2015), “Free Vibration of Stiffened Open Shells with Variable Radii of Curvature Using Extended Kantorovich-Ritz Method”, Ships and Offshore Structures, Vol. 10(1), pp. 94-106

 • Saad-Eldeen, S., Garbatov, Y. and Guedes Soares, C. (2016), “Experimental strength analysis of steel plates with a large circular opening accounting for corrosion degradation and cracks subjected to compressive load along the short edges”, Marine Structures, Vol. 48, pp. 52-67

 • Adak, M. and Guedes Soares, C. (2016), “Residual deflections and stresses in a thick T-Joint plate structure”, Journal of Applied Mechanical Engineering, Vol. 5(6), pp. 1-7

 • Garbatov, Y. and Guedes Soares, C. (2016), “Experimental Evaluation of Ageing Marine Structures” , Transactions of the Society of Naval Architects and Marine Engineers (SNAME), Vol. 123, pp. 89-99

 • Garbatov, Y., Parunov, J., Kodvanj, J., Saad-Eldeen, S. and Guedes Soares, C. (2016), “Experimental assessment of tensile strength of corroded steel specimens subjected to sandblast and sandpaper cleaning”, Marine Structures, Vol. 49, pp. 18-30

 • Garbatov, Y. and Guedes Soares, C. (2016), “Experimental and numerical analysis of the crushing behaviour of stiffened web girders”, International Journal of Impact Engineering, Vol. 88, pp. 22-38

 • Saad-Eldeen, S., Garbatov, Y. and Guedes Soares, C. (2016), “Ultimate Strength Analysis of Highly Damaged Ship Plates”, Marine Structures, Vol. 45, pp. 63-85

 • Ventura, M. and Guedes Soares, C. (2016), “Modelling stiffened plate panels in computer aided ship design”, Journal of Engineering for the Maritime Environment, Vol. 230(1), pp. 55-66

 • Saad-Eldeen, S., Garbatov, Y. and Guedes Soares, C. (2016), “Experimental Strength Assessment of Thin Steel Plates with a Central Elongated Circular Opening”, Journal of Constructional Steel Research, Vol. 118, pp. 135-144

 • Saad-Eldeen, S., Garbatov, Y. and Guedes Soares, C. (2016), “Experimental investigation on the residual strength of thin steel plates with a central elliptic opening and locked cracks”, Ocean Engineering, Vol. 115, pp. 19-29

 • Liu, B. and Guedes Soares, C. (2016), “Analytical method to determine the crushing behaviour of girders with stiffened web”, International Journal of Impact Engineering, Vol. 93, pp. 49-61

 • Chen, B.Q. and Guedes Soares, C. (2016), “Deformation measurements in welded plates based on close-range photogrammetry”, Journal of Engineering Manufacture, 2016, Vol. 230(4), pp. 662-674

 • Yeter, B., Garbatov, Y. and Guedes Soares, C. (2016) , “Evaluation of fatigue damage model predictions for fixed offshore wind turbine support structures”, International Journal of Fatigue, Vol. 87, pp. 71-80

 • Saad-Eldeen, S., Garbatov, Y. and Guedes Soares, C. (2016), “Strength Assessment of Steel Plates Subjected to Compressive Load and Dent Deformation”, Structure and Infrastructure Engineering, 2016, Vol. 12(8), pp. 995-1011

 • Saad-Eldeen, S., Garbatov, Y. and Guedes Soares, C. (2016), “Fast Approach for Ultimate Strength Assessment of Steel Box Girders Subjected to Non-uniform Corrosion Degradation”, Corrosion Engineering, Science and Technology, 2016, Vol. 51(1), pp. 60-76

 • Liu, B. and Guedes Soares, C. (2016), “Assessment of the strength of double-hull tanker side structures in minor ship collisions”, Engineering Structures, Vol. 120, pp. 1-12

 • Kharghani, N. and Guedes Soares, C. (2016), “Behaviour of composite laminates with embedded delaminations”, Composite Structures, Vol. 150, pp. 226-239

 • Sutherland, L.S., Si, M.F., Correia, J.R., Guedes Soares, C., Gomes, A. and Silvestre, N. (2016), “Quasi-static indentation response of pedestrian bridge multicellular pultruded GFRP deck panels”, Construction & Building Materials, 2016, Vol. 118, pp. 307-318

 • Garbatov, Y., Parunov, J., Kodvanj, J., Saad-Eldeen, S. and Guedes Soares, C. (2016), “Experimental assessment of tensile strength of corroded steel specimens subjected to sandblast and sandpaper cleaning”, Marine Structures, Vol. 49, pp. 18-30

 • Yeter, B., Garbatov, Y. e Guedes Soares, C. (2016) , “Evaluation of fatigue damage model predictions for fixed offshore wind turbine support structures”, International Journal of Fatigue, Vol. 87, pp. 71-80

 • Estefen. S.F., Chujutalli, J.H. and Guedes Soares, C. (2016), “Influence of Geometric Imperfections on the Ultimate Strength of the Double Bottom of a Suezmax Tanker”, Engineering Structures, Vol. 127, pp. 287-303

 • Chen, B.Q. and Guedes Soares, C. (2016), “Numerical and experimental investigation on the weld-induced deformation and residual stress in stiffened plates with brackets” , International Journal of Advanced Manufacturing Technology, Vol. 86, pp. 2723-2733

 • Chen, B.Q. and Guedes Soares, C. (2016), “Effect of welding sequence on temperature distribution, distortions, and residual stress of stiffened plates”, International Journal of Advanced Manufacturing Technology, Vol. 86, pp. 3145-3156

 • Garbatov, Y., Guedes Soares, C. and Masubuchi, K. (2016), “Residual Stresses and Distortion in Welds”, Reference Module in Materials Science and Materials Engineering, DOI:10.1016/B978-0-12-803581-8.03036-8

 • Chen, B.Q. and Guedes Soares, C. (2016), “Effects of plate configurations on the weld induced deformations and strength of fillet-welded plates”, Marine Structures, Vol. 50, pp. 243-259

 • Valido, A.J. and Barradas Cardoso, J. (2016), “Design variation of thin-walled composite beam cross-section properties”, Multidiscipline Modeling in Materials and Structures, Vol. 12(3), pp. 558-576

 • Wang, Z., Liu, K., Ji, CY., Chen, D., Wang, G. and Guedes Soares, C. (2016), “Experimental and numerical investigations on the T joint of jack-up platform laterally punched by a knife edge indenter”, Ocean Engineering, Vol. 127, pp. 212-225

 • Zhang. J., Shi, X.H. and Guedes Soares, C. (2016), “Experimental study on the response of multi-layered protective structure subjected to underwater contact explosions”, International Journal of Impact Engineering, Vol. 100, pp. 23-34

 • Wang, Z., Liu, K., Ji, CY., Chen, D., Wang, G. e Guedes Soares, C. (2016), “Experimental and numerical investigations on the T joint of jack-up platform laterally punched by a knife edge indenter”, Ocean Engineering, Vol. 127, pp. 212-225

 • Zhang. J., Shi, X.H. and Guedes Soares, C. (2016), “Experimental study on the response of multi-layered protective structure subjected to underwater contact explosions”, International Journal of Impact Engineering, Vol. 100, pp. 23-34

 • Valido, A.J. and Barradas Cardoso, J. (2016), “Design variation of thin-walled composite beam cross-section properties”, Multidiscipline Modeling in Materials and Structures, Vol. 12(3), pp. 558-576

 • Garbatov, Y. and Guedes Soares, C. (2016), “Experimental Evaluation of Ageing Marine Structures”, Transactions of the Society of Naval Architects and Marine Engineers (SNAME), Vol. 123, pp. 89-99

 • Sutherland, L.S., Sá, M.F., Correia, J.R., Guedes Soares, C., Gomes, A. and Silvestre, N. (2017), “Impact response of pedestrian bridge multicellular GFRP deck panels”, Composite Structures, Vol. 171, pp 473-485

 • Xu, M.C., Song, Z.J., Pan, J. and Guedes Soares, C. (2017), “Study on the influence of the initial deflection and load combination on the collapse behaviour of continuous stiffened panels”, International Journal of Steel Structures, Vol. 17(4), pp. 1427-1442

 • Liu, B., Villavicencio, R., Zhang, S. and Guedes Soares, C. (2017), “Assessment of external dynamics and internal mechanics in ship collisions”, Ocean Engineering, Vol. 141, pp. 326-336

 • Li, C.F., Ren, H.L., Zhu, Z.Y. and Guedes Soares, C. (2017), “Finite Element Analysis of the ultimate strength of aluminium-stiffended panels with fixed and floating transverse frames”, Journal of Offshore Mechanics and Arctic Engineering, Vol. 139, pp. 041401-1 - 041401-10

 • Sutherland, L.S., Sá, M.F., Correia, J.R., Guedes Soares, C., Gomes, A. and Silvestre, N. (2017), “Impact response of pedestrian bridge multicellular GFRP deck panels”, Composite Structures, Vol. 171, pp 473-485

 • Hashemzadeh, M., Garbatov, Y. and Guedes Soares, C. (2017), “Analytically based equations for distortion and residual stress estimations of thin butt-welded plates”, Engineering Structures, Vol. 137, pp. 115-124

 • Yue, JX., Damg, ZF. and Guedes Soares, C. (2017), “Prediction of Fatigue Crack Propagation in Bulb Stiffeners by Experimental and Numerical Methods”, International Journal of Fatigue, 2017, Vol. 99, pp. 101-110

 • Bahmyari, E., Khedmati, M.R. and Guedes Soares, C. (2017) , “Stochastic Analysis of Moderately Thick Plates Using the Generalized Polynomial Chaos and Element Free Galerkin method”, Engineering Analysis With Boundary Elements, Vol. 79, pp. 23-37

 • Sutherland, L.S., Amado, C. and Guedes Soares, C. (2017), “Statistical experimental design techniques to investigate the strength of adhesively bonded T-joints”, Composite Structures, Vol. 159, pp. 445-454

 • Hashemzadeh, M., Garbatov, Y. and Guedes Soares, C. (2017), “Analytically based equations for distortion and residual stress estimations of thin butt-welded plates”, Engineering Structures, Vol. 137, pp. 115-124

 • Yue, JX., Damg, ZF. and Guedes Soares, C. (2017), “Prediction of Fatigue Crack Propagation in Bulb Stiffeners by Experimental and Numerical Methods”, International Journal of Fatigue, 2017, Vol. 99, pp. 101-110

 • Bahmyari, E., Khedmati, M.R. and Guedes Soares, C. (2017) , “Stochastic Analysis of Moderately Thick Plates Using the Generalized Polynomial Chaos and Element Free Galerkin method”, Engineering Analysis With Boundary Elements, Vol. 79, pp. 23-37

 • Xu, M.C., Song, Z.J., Pan, J. and Guedes Soares, C. (2017), “Ultimate strength assessment of continuous stiffened panels under combined longitudinal compressive load and lateral pressure”, Ocean Engineering, Vol. 139, pp. 39-53

 • Garbatov, Y., Tekgoz, M. and Guedes Soares, C. (2017), “Experimental and Numerical Strength Assessment of Stiffened Plates Subjected to Severe Non-uniform Corrosion Degradation and Compressive Load” , Ship and Offshore Structures, Vol. 12(4), pp. 46

 • Liu, B. and Guedes Soares, C. (2017), “Influence of impact location on the plastic response and failure of rectangular cross-section tubes struck transversely by a hemispherical indenter”, Journal of Offshore Mechanics and Arctic Engineering, Vol. 139, pp. 021603-1-021603-12

 • Shi, X., Zhang. J. and Guedes Soares, C. (2017), “Experimental study on collapse of cracked stiffened plate with initial imperfections under compression”, Thin Walled Structures, 2017, Vol. 114, pp. 39-51

 • Zhang. J., Shi, X. and Guedes Soares, C. (2017), “Experimental analysis of residual ultimate strength of stiffened panels with pitting corrosion under compression”, Engineering Structures, Vol. 152, pp. 70-86

 • Saad-Eldeen, S., Garbatov, Y. and Guedes Soares, C. (2017), “Experimental compressive strength analyses of high tensile steel thin-walled stiffened panels with a large lightening opening”, Thin Walled Structures, Vol. 113, pp. 61-68

 • Liu, B., Villavicencio, R., Zhang, S. and Guedes Soares, C. (2017), “A simple criterion to evaluate the rupture of materials in ship collision simulations”, Marine Structures, Vol. 54, pp. 92-111

 • Li, C.F., Fu, P., Ren, H.L., Xu, W.J. and Guedes Soares, C. (2018), “Ultimate bearing capacity assessment of hull girder with Asymmetric cross-section”, Journal of Offshore Mechanics and Arctic Engineering, Vol. 140, pp. 061103-1 - 061103-9

 • Sutherland, L.S. (2018), “A review of impact testing on marine composite materials: Part II – Impact event and material parameters”, Composite Structures, Vol. 188, pp. 503-511

 • Yang, B., Guedes Soares, C. e Wang, D-Y. (2018), “An Empirical Formulation for Predicting the Dynamic Ultimate Strength of Rectangular Plates under In-plane Compressive Loading”, International Journal of Mechanical Sciences, Vol. 141, pp. 213-222

 • Yue, JX., Dong, Y. and Guedes Soares, C. (2018), “An Experimental-Finite Element Method Based on Beach Marks to Determine Fatigue Crack Growth Rate in Thick Plates with Varying Stress States”, Engineering Fracture Mechanics, Vol. 196, pp. 123-141

 • Ringsberg, J.W., Amdahl, J., Chen, B.Q., Cho, S.R., Ehlers, S., Hu, ZQ., Kõrgesaar, M., Liu, B., Nicklas, K., Parunov, J., Samuelides, M., Guedes Soares, C., Tabri, K., Quinton, B.W., Yamada, Y. and Zhang, SM. (2018), “MARSTRUCT benchmark study on collision simulations”, Marine Structures, Vol. 59, pp. 142-157

 • Dong, Y., Garbatov, Y. and Guedes Soares, C. (2018), “Fatigue crack initiation assessment of welded joints accounting for residual stress”, Fatigue & Fracture of Engineering Materials & Structures, Vol. 41, pp. 1823-1837

 • Dong, Y., Garbatov, Y. and Guedes Soares, C. (2018), “Fatigue crack initiation assessment of welded joints accounting for residual stress”, Fatigue & Fracture of Engineering Materials & Structures, Vol. 41, pp. 1823-1837

 • Zhang, X., Duan, M.G. and Guedes Soares, C. (2018), “Lateral buckling critical force for submarine pipe-in-pipe pipelines”, Applied Ocean Research, Vol. 78, pp. 99 -109

 • Woloszyk, K., Kahsin, M. and Garbatov, Y. (2018), “Numerical assessment of ultimate strength of severe corroded stiffened plates”, Engineering Structures, Vol. 168, pp. 346-354

 • Liu. Ka.,Yan, R-J. e Guedes Soares, C. (2018), “Damage identification in offshore jacket structures based on modal flexibility”, Ocean Engineering, Vol. 170, pp. 171-185

 • Liu. K., Liu, B., Villavicencio, R., Wang, Z. and Guedes Soares, C. (2018), “Assessment of material strain rate effects on square steel plates under lateral dynamic impact loads”, Ships & Offshore Structures, Vol. 13(2), p. 217-225

 • Liu, B., Villavicencio, R. and Guedes Soares, C. (2018), “Experimental and numerical analysis of residual stresses and strains induced during cold bending of thick steel plates”, Marine Structures, Vol. 57, pp. 121-132

 • Chen, B.Q., Hashemzadeh, M. and Guedes Soares, C. (2018), “Validation of numerical simulations with X-ray diffraction measurements of residual stress in butt-welded steel plates”, Ships & Offshore Structures, Vol. 13(3), pp. 273-282

 • Liu. K., Liu, B., Wang, Z., Wang, G. and Guedes Soares, C. (2018), “An experimental and numerical study on the behaviour of tubular components and T-joints subjected to transverse impact loading”, International Journal of Impact Engineering, Vol. 120, pp.16-30

 • Patel, SD. and Guedes Soares, C. (2018), “Reliability assessment of glass epoxy composite plates due to low velocity impact”, Composite Structures, Vol. 200, pp. 659-668

 • Liu. K., Liu, B., Wang, Z., Wang, G. and Guedes Soares, C. (2018), “An experimental and numerical study on the behaviour of tubular components and T-joints subjected to transverse impact loading”, International Journal of Impact Engineering, Vol. 120, pp.16-30

 • Mikulic, A., Parunov, J. and Guedes Soares, C. (2018), “Wave-induced vertical motions and bending moments in damaged ships”, Journal Marine Science and Application, Vol. 17, pp. 389-405

 • Tekgoz, M., Garbatov, Y. and Guedes Soares, C. (2018), “Strength assessment of a damaged container ship subjected to asymmetrical bending loadings”, Marine Structures, Vol. 58, pp. 172-198

 • Li, C.F., Ren, H.L., Zhu, Z.Y. and Guedes Soares, C. (2018), “Numerical investigation on the buckling behaviour of aluminium integrally stiffened panels subjected to uniaxial compressive load”, Thin-Walled Structures, Vol. 127, pp. 221-234

 • Kharghani, N. and Guedes Soares, C. (2018), “Experimental and numerical study of hybrid steel-FRP balcony overhang of ships under shear and bending”, Marine Structures, Vol. 60, pp. 15-33

 • Liu. Ka., Yan, R-J. and Guedes Soares, C. (2018), “An improved model updating technique based on modal data”, Ocean Engineering, Vol. 154, pp. 277-287

 • Yang, B., Wang, D-Y. and Guedes Soares, C. (2018), “Dynamic ultimate strength of outer bottom stiffened plates under in-plane compression and lateral pressure”, Ocean Engineering, Vol. 157, pp. 44-53

 • Liu, B., Wu, W.G. and Guedes Soares, C. (2018), “Ultimate strength analysis of a SWATH ship subjected to transverse loads”, Marine Structures, Vol. 57, pp. 105-120

 • Sutherland, L.S. (2018), “A review of impact testing on marine composite materials: Part I – Marine impacts on marine composites”, Composite Structures, Vol. 188, pp. 197-208

 • Sutherland, L.S. (2018), “A review of impact testing on marine composite materials: Part III – Damage tolerance and durability”, Composite Structures, Vol. 188, pp. 512-518

 • Edalat, P., Khedmati, M.R. and Guedes Soares, C. (2013), “Free Vibration and Dynamic Response Analysis of Stiffened Parabolic Shells using the Equivalent Orthotropic Shell Parameters”, Latin American Journal of Solids and Structures, Vol. 10, pp. 747-766

 • Zhang, X., Guedes Soares, C., An, C. and Duan, M. G. (2018) , “An Unified formula for the critical force of lateral buckling of imperfect submarine pipelines”, Ocean Engineering , Vol. 166, pp. 324-335

 • Chen, B.Q. and Guedes Soares, C. (2018), “A simplified model for the effect of weld induced residual stresses on the axial ultimate strength of stiffened plates”, Journal of Marine Science and Application, Vol. 17, pp. 57-67

 • Chujutalli, J.H., Estefen. S.F. and Guedes Soares, C. (2018), “Experimental and numerical analysis of small-scale panels with indented stiffeners”, Journal of Constructional Steel Research, Vol. 150, pp. 7-22

 • Saad-Eldeen, S., Garbatov, Y. and Guedes Soares, C. (2018), “Structural capacity of plates and stiffened panels of different materials with opening”, Ocean Engineering, Vol. 167, pp. 45-54

 • Liu. Ka., Yan, R-J. and Guedes Soares, C. (2018) , “Optimal sensor placement and assessment for modal identification”, Ocean Engineering, Vol. 165, pp. 209-220

 • Kharghani, N. and Guedes Soares, C. (2018) , “Experimental, numerical and analytical study of bending of rectangular composite laminates”, European Journal of Mechanics A- Solids (EJMAS), Vol. 72, pp. 155-174

 • Yue, JX., Dong, Y. and Guedes Soares, C. (2018), “An Experimental-Finite Element Method Based on Beach Marks to Determine Fatigue Crack Growth Rate in Thick Plates with Varying Stress States”, Engineering Fracture Mechanics, Vol. 196, pp. 123-141

 • Chichi, D. and Garbatov, Y. (2018), “Reinforcement of ageing ship structures”, International Journal of Maritime Engineering, Vol. 160(Part A3), pp. A257-A266

 • Hashemzadeh, M., Chen, B.Q. and Guedes Soares, C. (2018), “Evaluation of multi-pass welding induced residual stress using numerical and experimental approaches”, Ships & Offshore Structures, Vol. 13(8), pp. 847-856

 • Gordo, J.M. (2018), “Dependence of ultimate bending moment of box girders on panel's slenderness” , International Journal of Engineering Innovation & Research, Vol. 7(4), pp. 216-219

 • Oliveira, A. and Gordo, J.M. (2018), “Lean tools applied to a shipbuilding panel line assembling process”, Brodogradnja, Vol. 69(4), pp. 53-64

 • Moita, P.J., Madeira, J.F.A., Valido, A.J. and Barradas Cardoso, J. (2018), “Optimal multiobjective design of a vehicle restraint system using pre-acting control: A limiting performance analysis”, Multidiscipline Modeling in Materials and Structures, Vol. 14(4), pp. 756-768

 • Mikulic, A., Parunov, J. and Guedes Soares, C. (2018), “Wave-induced vertical motions and bending moments in damaged ships” , Journal Marine Science and Application, Vol. 17, pp. 389-405

 • Sutherland, L.S. (2018), “A review of impact testing on marine composite materials: Part IV – Scaling, strain rate and marine-type laminates”, Composite Structures, . Vol. 200, pp. 929-938

 • Shi, X.H., Zhang. J. and Guedes Soares, C. (2018), “Numerical assessment of experiments on the ultimate strength of stiffened panels with pitting corrosion under compression" , Thin-Walled Structures, Vol. 133, pp. 52-70

 • Liu, B., Garbatov, Y., Zhu, L. and Guedes Soares, C. (2018), “Numerical assessment of the structural crashworthiness of corroded ship hulls in stranding”, Ocean Engineering, Vol. 170, pp. 276-285

 • Yeter, B., Garbatov, Y. and Guedes Soares, C. (2019), “Ultimate strength assessment of jacket offshore wind turbine support structures subjected to progressive bending loading”, Ships & Offshore Structures, Vol. 14(2), pp. 165-175

 • Jafaryeganeh, H., Ventura, M. and Guedes Soares, C. (2019) , “Multi-objective optimization of internal compartment layout of oil tankers”, Journal of Ship Production and Design, Vol. 35(4), pp. 374-385.

 • Jiang, F.Y., Dong, S., Zhao, Y.L., Xie, Z. and Guedes Soares, C. (2019), “Investigation on the deformation response of submarine pipelines subjected to impact loads by dropped objects”, Ocean Engineering, Vol. 194, pp. 106638-1 - 106638-18

 • Garbatov, Y. and Guedes Soares, C. (2019), “Spatial corrosion wastage modelling of steel plates exposed to marine environments”, Journal of Offshore Mechanics and Arctic Engineering, Vol. 141(3), pp. 031602-1 - 031602-6

 • Chen, B.Q. and Guedes Soares, C. (2019), “Numerical investigation on weld-induced imperfections in aluminium ship plates”, Journal of Offshore Mechanics and Arctic Engineering, Vol. 141(6), pp. 061605-1 - 061605-7

 • Liu, B. and Guedes Soares, C. (2019), “Effect of strain rate on dynamic responses of laterally impacted steel plates”, International Journal of Mechanical Sciences, Vol. 160, pp. 307-317

 • Liu, B. and Guedes Soares, C. (2019), “Effect of strain rate on dynamic responses of laterally impacted steel plates”, International Journal of Mechanical Sciences, Vol. 160, pp. 307-317

 • Sobral, J. and Guedes Soares, C. (2019), “Assessment of the adequacy of safety barriers to hazards”, Safety Science, Vol. 114, pp. 40-48

 • Kharghani, N., Alizadeh, F., Guedes Soares, C. and Tsouvalis, N.G. (2019), “Experimental and numerical study of a composite-to-steel joint under bending and torsion loads”, Journal of Engineering for the Maritime Environment, Vol. 233(3), pp. 722-734

 • Yin, QL., Dong, S., Jiang, F.Y. and Guedes Soares, C. (2019), “Spudcan Penetration Simulation Using CEL Method with Thermo-Mechanical Coupled Analysis”, Journal of Ocean University of China, Vol. 18(2), pp. 317-327

 • Chenggong, S., Zheng, M., Guedes Soares, C., Menglan, D., Yi, W. and Darlington Uche, O.M. (2019) , “Theoretical prediction model for indentation of pipe-in-pipe structures”, Applied Ocean Research, Vol. 92, pp. 101940-1 - 101940-13

 • Kharghani, N. and Guedes Soares, C. (2019), “Analytical and experimental study of the ultimate strength of delaminated composite laminates under compressive loading”, Composite Structures, Vol. 228, pp. 11355-1 - 111355-18

 • Xu, S.X., Liu, B., Garbatov, Y., Wu, W.G. and Guedes Soares, C. (2019), “Experimental and numerical analysis of ultimate strength of inland catamaran subjected to vertical bending moment”, Ocean Engineering, Vol. 188, pp. 106320-1 - 106320-14

 • Saad-Eldeen, S., Garbatov, Y. and Guedes Soares, C. (2019), “Buckling collapse tests of deteriorated steel plates with multiple circular openings”, Ocean Engineering, Vol. 172, pp. 523-530

 • Garrido, M., Teixeira, R., Correia, J.R. and Sutherland, L.S. (2019), “Quasi-static indentation and impact in glass-fibre reinforced polymer sandwich panels for civil and ocean engineering applications”, Sandwich Structures and Materials, Vol. 0(0), pp. 1-28

 • Woloszyk, K. and Garbatov, Y. (2019), “Structural Reliability Assessment of Corroded Tanker Ship Based on Experimentally Estimated Ultimate Strength”, Polish Maritime Research, Vol. 26(2), pp. 47-54

 • Yeter, B., Garbatov, Y. and Guedes Soares, C. (2019), “Numerical and experimental study of ultimate strength of a monopile structure”, Engineering Structures, Vol. 194, pp. 290-299

 • Shi, X.H., Zhang. J. and Guedes Soares, C. (2019), “Numerical assessment of experiments on the residual ultimate strength of stiffened plates with a crack”, Ocean Engineering, Vol. 171, pp. 443-457

 • Dong, Y. and Guedes Soares, C. (2019), “Stress distribution and fatigue crack propagation analyses in welded joints”, Fatigue & Fracture of Engineering Materials & Structures, Vol. 42, pp. 69-83

 • Chen, B.Q., Liu, B. and Guedes Soares, C. (2019), “Experimental and numerical investigations on the influence of stiffeners on the crushing resistance of web girders in ship grounding”, Marine Structures, Vol. 63, pp. 351-363

 • Kharghani, N., Guedes Soares, C. and Tsouvalis, N.G. (2019), Experimental and numerical study of the bolt reinforcement of a composite-to-steel butt-joint under three-point bending test, Marine Structures, Vol. 63, pp. 384-403

 • Pinheiro, B., Guedes Soares, C. and Pasqualino, I.P. (2019), “Generalized expressions for stress concentration factors of pipeline plain dents under cyclic internal pressure”, International Journal of Pressure Vessels and Piping, Vol. 170, pp. 82-91

 • Garbatov, Y., Saad-Eldeen, S., Guedes Soares, C., Parunov, J. and Kodvanj, J. (2019), “Tensile test analysis of corroded cleaned aged steel specimens”, Corrosion Engineering, Science and Technology, Vol. 54(2), pp. 154-162

 • Yeter, B., Garbatov, Y. and Guedes Soares, C. (2019), “Uncertainty analysis of soil-pile interactions of monopile offshore wind turbine support structures”, Applied Ocean Research, Vol. 82, pp. 74-88

 • Liu, B., Villavicencio, R., Liu, K., Zhu, L. and Guedes Soares, C. (2019), “Response of an aluminum stiffened plate under extreme slamming loadings”, Journal of Offshore Mechanics and Arctic Engineering, Vol. 141, pp. 051606-1 - 051606-7

 • Liu, B., Villavicencio, R., Liu, K., Zhu, L. and Guedes Soares, C. (2019), “Response of an aluminum stiffened plate under extreme slamming loadings”, Journal of Offshore Mechanics and Arctic Engineering, Vol. 141, pp. 051606-1 - 051606-7

 • Patel, SD., Vusa, V.R. and Guedes Soares, C. (2019), “Crashworthiness analysis of polymer composites under axial and oblique impact loading”, 3International Journal of Mechanical Sciences, Vol. 156, pp. 221-234

 • Yang, B., Guedes Soares, C. e Wang, D-Y. (2019), “Dynamic ultimate compressive strength of simply supported rectangular plates under impact loading”, Marine Structures, Vol. 66, pp. 258-271

 • Yang, B., Guedes Soares, C. and Wang, D-Y. (2019), “Dynamic ultimate compressive strength of simply supported rectangular plates under impact loading”, Marine Structures, Vol. 66, pp. 258-271

 • Zhang, X. and Guedes Soares, C. (2019), “Lateral buckling analysis of subsea pipelines on nonlinear foundation”, Ocean Engineering, Vol. 186, pp. 106085 (11 pages)

 • Alizadeh, F. and Guedes Soares, C. (2019), “Experimental and numerical investigation of the fracture toughness of Glass/Vinylester composite laminates”, European Journal of Mechanics A- Solids (EJMAS), Vol. 73, pp. 204-211

 • Dong, Y., Teixeira, A.P. and Guedes Soares, C. (2019), “Fatigue reliability analysis of butt welded joints with misalignments based on hotspot stress approach”, Marine Structures, Vol. 65, pp. 215-228

 • Sutherland, L.S., Amado, C. and Guedes Soares, C. (2019), “Statistical analyses of the effects of bonding parameters and fabrication robustness on the strength of adhesive T-joints”, Composites Part B, Vol. 175, pp. 107063 (9 pages)

 • Kharghani, N. and Guedes Soares, C. (2019), “Mechanical properties evaluation of the components of a failed hybrid steel-FRP balcony overhang in ships” , Marine Structures, Vol. 68, pp. 102647 (21 pgs)

 • Yeter, B., Garbatov, Y. and Guedes Soares, C. (2019), “Risk-based life-cycle assessment of offshore wind turbine support structures accounting for economic constraints”, Structural Safety, Vol. 81, pp. 101867 (13 pgs)

 • Doan, V.T., Liu, B., Garbatov, Y., Wu, WG. and Guedes Soares, C. (2020), “Strength assessment of aluminium and steel stiffened panels with openings on longitudinal girders”, Ocean Engineering, Vol. 200, pp. 107047-1 - 107047-16

 • Parunov, J., Corak, M., Guedes Soares, C., Jafaryeganeh, H., Kalske, S., Lee, Y.W., Liu, S., Papanikolaou, A., Prentice, D., Prpić-Oršić, J., Ruponen, P. and Vitali, N. (2020), “Benchmark study and uncertainty assessment of numerical predictions of global wave loads on damaged ships”, Ocean Engineering, Vol. 197, pp. 106876 (12 pages)

 • Saad-Eldeen, S., Garbatov, Y. and Guedes Soares, C. (2020), “Experimental failure assessment of high tensile stiffened plates with openings”, Engineering Structures, Vol. 206, pp. 110121-1 - 110121-13

 • Kharghani, N. and Guedes Soares, C. (2020) , “Experimental, numerical and analytical study of buckling of rectangular composite laminates”, European Journal of Mechanics / A Solids, Vol. 79, pp. 103869-1 - 103869-15

 • Yeter, B., Garbatov, Y. and Guedes Soares, C. (2020), “Strength assessment of jacket offshore wind turbine support structure accounting for rupture”, Journal of Offshore Mechanics and Arctic Engineering, Vol. 142, pp. 011902-1 - 011902-7

 • Kharghani, N. and Guedes Soares, C. (2020), “Analysis of composite laminates containing through-the-width and embedded delamination under bending using layerwise HSDT”, European Journal of Mechanics / A Solids, Vol. 82, pp. 104003 (Pages 19)

 • Jafaryeganeh, H. and Guedes Soares, C. (2020), “A technique of panels cutting for modification of hull geometry hydrodynamic models”, International Journal of Maritime Engineering, Vol. 162(Part A2), pp. A219-A230

 • Garbatov, Y. (2020), “Special Issue: Carlos Guedes Soares Honoring Symposium”, Journal of Offshore Mechanics and Arctic Engineering, Vol. 142, pp. 030301

 • Yeter, B., Garbatov, Y. and Guedes Soares, C. (2020), “Risk-based maintenance planning of offshore wind turbine farms”, Reliability Engineering and System Safety, Vol. 202, pp. 107062 (13 pages)

 • Li, MZ., Guedes Soares, C. and Yan, RJ. (2020), “A novel shear deformation theory for static analysis of functionally graded plates”, Composite Structures, Vol. 250, pp. 112559 (12 pages)

 • Chujutalli, J.H., Estefen. S.F. and Guedes Soares, C. (2020), “Indentation Parameters Influence on the Ultimate Strength of Panels for Different Stiffeners”, Journal of Constructional Steel Research, Vol. 170, pp. 106097

 • Tekgoz, M. and Garbatov, Y. (2020), “Strength Assessment of Rectangular Plates Subjected to Extreme Cyclic Load Reversals”, Journal of Marine Science and Engineering, Vol. 8, pp. 65 (20 pages)

 • Tekgoz, M., Almany, N. and Garbatov, Y. (2020), “Quasi-static direct strength assessment of offshore multipurpose support vessel in head sea”, Sustainable Development and Innovations in Marine Technologies, Georgiev, P. & Guedes Soares C. (Eds.), Taylor & Francis Group, London, pp. 415-422

 • Jafaryeganeh, H., Ventura, M. and Guedes Soares, C. (2020), “Application of multi-criteria decision making methods for selection of ship internal layout design from a Pareto optimal set”, Ocean Engineering, Vol. 202, pp. 107151-1 - 107151-14

 • Jafaryeganeh, H., Ventura, M. and Guedes Soares, C. (2020), “Effect of normalization techniques in multi-criteria decision making methods for the design of ship internal layout from a Pareto optimal set”, Structural and Multidisciplinary Optimization, Vo. 62, pp. 1849-1863

 • Zhang, X., Chen, B.Q. and Guedes Soares, C. (2020), “Effect of non-symmetrical corrosion imperfection on the collapse pressure of subsea pipelines”, Marine Structures, Vol. 73, 102806 (16 pages)

 • Wang, ZK., Tang, YG., Yang, J.G. and Guedes Soares, C. (2020), , “Analytical study of thermal upheaval buckling for free spanning pipelines”, Ocean Engineering, Vol. 218, 108220 (12 pages)

 • Liu, B., Wang, S., Villavicencio, R. and Guedes Soares, C. (2020), “Slamming load and hydroelastic structural response of bow flare areas of aluminium fast displacement crafts”, Ocean Engineering, Vol. 218, 108207 (11 pages)

 • Gordo, J.M. (2020), “Effect of Residual Stresses on the Elastoplastic Behavior of Welded Steel Plates”, Journal of Marine Science and Engineering, Vol. 8, 702 (19 pages)

 • Jafaryeganeh, H., Ventura, M. and Guedes Soares, C. (2020), “Robust-based optimization of the hull internal layout of oil tanker”, Ocean Engineering, Vol. 216, 107846 (14 pages)

 • Liu, B., Doan, V.T., Garbatov, Y., Wu, WG. and Guedes Soares, C. (2020), “Study on ultimate compressive strength of aluminium-alloy plates and stiffened panels”, Journal of Marine Science and Application, Vol. 19, pp. 534-552

 • Woloszyk, K., Garbatov, Y., Kowalski, J. and Samson, L. (2020), Experimental and numerical investigations of ultimate strength of imperfect stiffened plates of different slenderness, Polish Maritime Research, Vol. 27, pp. 120-129

 • Woloszyk, K. and Garbatov, Y. (2020), Reliability of corroded stiffened plate subjected to uniaxial compressive loading, International Journal of Maritime Engineering, Vol. 162, pp. A421-A430

 • Woloszyk, K. and Garbatov, Y. (2020), Analysis of ultimate compressive strength of cracked plates with the use of DOE techniques, Polish Maritime Research, Vol. 27, pp. 109-120

 • Li, C.F., Ren, H.L., Zhu, Z.Y., Feng, G.Q., Fu, P., Guedes Soares, C. (2020), Influence of Model Extension and Boundary Conditions on the Buckling Behaviour of Aluminium Integrally Stiffened Panels under Uniaxial Compressive Loading, Ocean Engineering, Vol. 216, 108066 (16 pages)

 • Al-Hamati, A.A., Duan, M.G., An, C., Guedes Soares, C. and Estefen, S.F. (2020), “Buckling properties of a Subsea Function Chamber for oil /gas processing in deep-waters”, Journal of Marine Science and Application, Vol. 19, pp. 642-657

 • Xu, Wei and Guedes Soares, C. (2020), “Numerical investigation on the ultimate strength of box beams with impact damage”, Journal of Marine Science and Application, Vol. 19, pp. 705-716

 • Tekgoz, M., Garbatov, Y. and Guedes Soares, C. (2020), “Review of ultimate strength assessment of ageing and damaged ship structures”, Journal of Marine Science and Application, Vol. 19(4), pp. 512-533

 • Guedes Soares, C. (2020), “Ultimate Strength of Ships and Offshore Structures”, Journal of Marine Science and Application, Vol. 19, pp. 509-511

 • Woloszyk, K. and Garbatov, Y. (2020), “Random field modelling of mechanical behaviour of corroded thin steel plate specimens”, Engineering Structures, Vol. 212, pp. 110544 (12 pages)

 • Xu, SX., Lin, JP., Liu, B., Garbatov, Y., Wang, Y. and Guedes Soares, C. (2020), “Experimental and numerical buckling analysis of cylindrical pressure hulls with multi-circular openings”, Ocean Engineering, Vol. 214, pp. 107689 (12 pages)

 • Liu, B. and Guedes Soares, C. (2020), “Ultimate strength assessment of ship hull structures subjected to cyclic bending moments”, Ocean Engineering, Vol. 215, pp. 107685 (10 pages)

 • Woloszyk, K. and Garbatov, Y. (2020), “An enhanced method in predicting tensile behaviour of corroded thick steel plate specimens by using random field approach”, Ocean Engineering, Vol. 213, pp. 107803 (12 pages)

 • Gordo, J.M. (2020), “Effect of Residual Stresses on the Elastoplastic Behavior of Welded Steel Plates”, Journal of Marine Science and Engineering, Vol. 8, pp. 702 (19 pages)

 • Li, S.S., Dong, Y. and Guedes Soares, C. (2020), “A procedure to generate design load-time histories for fatigue strength assessment of offshore structures”, Ocean Engineering, Vol. 213, pp. 107707 (12 pages)

 • Yeter, B., Tekgoz, M., Garbatov, Y. and Guedes Soares, C. (2020), “Fragility analysis of an ageing monopile offshore wind turbine subjected to simultaneous wind and seismic load”, Safety in Extreme Environments, Vol. 2, pp. 155-170

 • Jafaryeganeh, H., Ventura, M. and Guedes Soares, C. (2020), “Robust-based optimization of the hull internal layout of oil tanker”, Ocean Engineering, Vol. 216, pp. 107846 (14 pages)

 • Chen, B.Q. and Guedes Soares, C. (2021), “Experimental and numerical investigation on welding simulation of long stiffened steel plate specimen”, Marine Structures, Vol. 75, pp. 102824 (12 pages)

 • Wang, YT., Liu, J.J., Hu, J.J., Garbatov, Y. and Guedes Soares, C. (2021), “Fatigue strength of EH36 steel welded joints and base material at low-temperature”, International Journal of Fatigue, Vol. 142, pp. 105896 (12 pages)

 • Wang, ZK., Tang, YG. and Guedes Soares, C. (2021), “Imperfection study on lateral thermal buckling of subsea pipeline triggered by a distributed buoyancy section”, Marine Structures, Vol. 76, 102916 (17 pages).

 • Xu, M.C. and Guedes Soares, C. (2021), “Experimental evaluation on the ultimate strength of stiffened panels under longitudinal compression”, Ocean Engineering, Vol. 220, 108496 (14 pages)

 • Xu, M.C. and Guedes Soares, C. (2021), “Experimental evaluation on the ultimate strength of stiffened panels under longitudinal compression”, Ocean Engineering, Vol. 220, 108496 (14 pages)

 • Duan, M.G., Zhang, K., Guedes Soares, C. and Paik, J.K. (2021), “Theoretical Investigation on Hub Structure Design of Subsea Connectors”, Thin-Walled Structures, Vol. 159, 107036 (15 pages)

 • Wang, YT., Liu, J.J., Hu, J.J., Garbatov, Y. and Guedes Soares, C. (2021), “Fatigue strength of EH36 steel welded joints and base material at low-temperature”, International Journal of Fatigue, Vol. 142, 105896 (12 pages)

 • Chen, B.Q. and Guedes Soares, C. (2021), “Experimental and numerical investigation on welding simulation of long stiffened steel plate specimen”, Marine Structures, Vol. 75, pp. 102824 (12 pages)

 • He, X. and Guedes Soares, C. (2021), “Experimental study on the dynamic behavior of beams under repeated impacts”, International Journal of Impact Engineering, Vol. 147, 103724 (23 pages)

 • He, X. and Guedes Soares, C. (2021), “Experimental study on the dynamic behavior of beams under repeated impacts”, International Journal of Impact Engineering, Vol. 147, 103724 (23 pages)

 • Liu, B., Villavicencio, R., Terndrup Pedersen, P. and Guedes Soares, C. (2021), “Analysis of structural crashworthiness of double-hull ships in collision and grounding”, Marine Structures, Vol. 76, 102898 (19 pages)

 • Wang, ZK., Tang, YG. and Guedes Soares, C. (2021), “Analytical and numerical study on lateral buckling of imperfect subsea pipelines with nonlinear lateral pipe-soil interaction model”, Ocean Engineering, Vol. 221, 108495 (14 pages)

 • Xu, M.C. and Guedes Soares, C. (2021), “Numerical study on the influence of experimental conditions on the collapse behaviour of stiffened panels”, Ocean Engineering, Vol. 220, 108410 (14 pages).

 • Woloszyk, K., Bielski, P.M., Garbatov, Y. and Mikulski, T. (2021), “Photogrammetry image-based approach for imperfect structure modelling and FE analysis”, Ocean Engineering, Vol. 223, 108665 (14 pages)

 • Li, MZ., Yan, RJ., Xu, L. and Guedes Soares, C. (2021), “A general framework of higher-order shear deformation theories with a novel unified plate model for composite laminated and FGM plates”, Composite Structures, Vol. 261, 113560 (12 pages)

 • Li, MZ., Yan, RJ. and Guedes Soares, C. (2021), “Free vibration of advanced composite plates using a new higher order shear deformation theory”, European Journal of Mechanics / A Solids, Vol. 88, 104236 (13 pages)

 • Alizadeh, F. and Guedes Soares, C. (2021), “Influence of long-term moisture exposure and impact damage on the residual compressive strength of Glass-reinforced Vinylester”, Composite Structures, Vol. 260, 113525 (15 pages).

 • Wang, ZK., Tang, YG., Duan, N. and Guedes Soares, C. (2021), “Controlled lateral buckling of subsea pipelines triggered by imposed residual initial imperfections”, Ocean Engineering, Vol. 233, 109124 (19 pages)

 • Li, MZ. Guedes Soares, C. and Yan, RJ. (2021), “Free vibration analysis of FGM plates on Winkler/Pasternak/Kerr foundation by using a simple quasi-3D HSDT”, Composite Structures, Vol. 264, 113643 (12 pages)

 • Shi, X.H., Hu, ZQ., Zhang. J. and Guedes Soares, C. (2021), “Ultimate strength of a cracked stiffened panel repaired by CFRP and stop holes”, Ocean Engineering, Vol. 226, 108850 (18 pages)

 • Hashemzadeh, M., Garbatov, Y. and Guedes Soares, C. (2021), “Welding-induced residual stresses and distortions of butt-welded corroded and intact plates”, Marine Structures, Vol. 79, 103041 (15 pages)

 • Liu, B., Wang, G., Chen, B.Q. and Guedes Soares, C. (2021), “Experimental, numerical and analytical analysis of the penetration of a scaled double-hull tanker side structure”, Marine Structures, Vol. 78, 103018 (17 pages)

 • Zhang, J., Wang, ZK. and Guedes Soares, C. (2021), “Lateral buckling of subsea pipelines triggered by sleeper with lateral constraint”, Ocean Engineering, Vol. 234, 109306 (12 pages)

 • Li, RX., Chen, B.Q. and Guedes Soares, C. (2021), “Design equation for the effect of ovality on the collapse strength of sandwich pipes”, Ocean Engineering, Vol. 235, 109367 (11 pages)

 • Kodvanj, J., Garbatov, Y., Guedes Soares, C. and Parunov, J. (2021), “Numerical analysis of stress concentration in non-uniformly corroded small scale specimens”, Journal of Marine Science and Application, Vol. 20, pp. 1-9

 • Liu, B., Liu, K., Villavicencio, R., Dong, A. and Guedes Soares, C. (2021), “Experimental and numerical analysis of the penetration of welded aluminium alloy panels”, Ships & Offshore Structures, Vol. 16(5), pp. 492-504



Articles in Books
 • Guedes Soares, C., Soares, M.R.N. and Paiva, J.A. (1987), “Minimization of the Weight of the Primary Structure of Tankers” (In Portuguese), Ship’s Project and Onboard Systems, Naval Architecture and Marine Engineering in Portugal (in Portuguese), Vol. I, Guedes Soares, C. (Ed.), Ordem dos Engenheiros, Lisbon, pp. 10.1-10.31

 • Faulkner, D., Guedes Soares, C. and Warwick, D.M. (1987), “Modelling Requirements for Structural Design and Assessment” , Integrity of Offshore Structures, Elsevier Applied Science, Issue 3, pp. 25 - 54

 • Guedes Soares, C., Roque, R. and Guedes da Silva, A. (1990), “Considerations about the Structural Design of Fishing Vessels in Composite Materials” (In Portuguese), The Fishing Navy, Naval Architecture and Marine Engineering in Portugal, Vol. VIII, Guedes Soares, C. (Ed.), Lisbon, pp. 28.1 - 28.36

 • Guedes Soares, C., Costa, P.J. and Neves, R. (1992), “Experimental Study of the Mechanical Properties of Composite Materials for Fishing Vessels” (In Portuguese), Exploring the Portuguese Exclusive Economic Zone, Naval Architecture and Marine Engineering in Portugal (in Portuguese), Vol. IX, Guedes Soares, C. (Ed.), Lisbon, pp. 17.1-17.26

 • Gordo, J.M. and Guedes Soares, C. (1993), “Approximate Load Shortening Curves for Stiffened Plates Under Uniaxial Compression”, Integrity of Offshore Structures, EMAS, Issue 5, pp. 189-211

 • Ventura, M., Rodrigues, C. and Guedes Soares, C. (1995), “Development of a System for Computer-Aided Design of Ship Hulls” (In Portuguese), Marine Technology and Transportation, Graczyk, T., Jastrzebski, I., Brebbia, C. A. and Burns, R. (Eds.), Computational Mechanics Publications, Southampton, pp. 287-294

 • Guedes Soares, C. and Kmiecik, M. (1995), “Influence of the Boundary Conditions on the Collapse Strength of Square Plates with Initial Imperfections”, Marine Technology and Transportation Conference, Graczyk, T., Jastrzebski, T., Brebbia, C.A. and Burns, R. (Eds.), Computational Mechanics Publications, pp. 227-235

 • Blot, J.Y., Ruiz, P., Ventura, M. and Guedes Soares, C. (1995), “Application of Automatic Methods to the Study of Ancient Hulls” (In Portuguese), Shipbuilding in the Past and Present, Naval Architecture and Marine Engineering in Portugal (in Portuguese), Vol. X, Guedes Soares, C. (Ed.), Lisbon, pp. 5.1-5.36

 • Rodrigues, C., Lima, F.S., Ventura, M. and Guedes Soares, C. (1995), “The CADESNAV/-PC System for support to Ships’ Design and Production” (In Portuguese), Shipbuilding in the Past and Present, Naval Architecture and Marine Engineering in Portugal (in Portuguese), Vol. X, Guedes Soares, C. (Ed.), Lisbon, pp. 10.1-10.13

 • Torrado, T., Coelho, J.J., Pilar, A.P., Ventura, M. and Guedes Soares, C. (1995), “Ships’ Structure System Representation” (In Portuguese), Shipbuilding in the Past and Present, Naval Architecture and Marine Engineering in Portugal (in Portuguese), Vol. X, Guedes Soares, C. (Ed.), Lisbon, pp. 12.1-12.22

 • Ventura, M., Gordo, J.M. and Guedes Soares, C. (1995), “Computer-Aided Ship Structural Design” (In Portuguese), Shipbuilding in the Past and Present, Naval Architecture and Marine Engineering in Portugal (in Portuguese), Vol X, Guedes Soares, C. (Ed.), Lisbon, pp. 13.1-13.14

 • Gordo, J.M. and Guedes Soares, C. (1997), “Collapse Strenght of Damaged Ship Sections” (In Portuguese), Safety, Quality and Environment in the Marine Industries (in Portuguese), Guedes Soares, C. and Monerris, A. M. (Eds.), Lisbon, pp. 27.1-27.13

 • Ventura, M. and Guedes Soares, C. (1998), “Hull Form Modelling using NURBS Curves and Surfaces”, Practical Design of Ships and Mobile Units, Oosterveld, 1998, M.W.C. and Tan, S.G. (Eds.), Elsevier Science, The Hague, pp. 289-296

 • Ventura, M., Victoria, J. and Guedes Soares, C. (1999), “Ship Hull Product Model”, Application of Information Technologies to the Maritime Industries, Guedes Soares, C. and Brodda, J. (Eds.), Edições Salamandra, Lda., Lisbon, pp. 147-162

 • Cacho, A.J. and Guedes Soares, C. (2000), “A Plate Development Method Based in Geodesics” (In Portuguese), The Sea and the Challenges of the Future, Guedes Soares, C. e Beirão Reis, J. (Eds.), Edições Salamandra, Lda, Lisbon, pp. 411-430

 • Ventura, M., Victória, J. and Guedes Soares, C. (2000) , “Integration of STEP Technology in a Ship Product Data Modelling System” (In Portuguese), The Sea and the Challenges of the Future, Guedes Soares, C. e Beirão Reis, J. (Eds.), Edições Salamandra, Lda., Lisbon, pp. 387-409

 • Vitória, J., Bernardo, J. and Guedes Soares, C. (2000), “System of Plates Nesting for the Maritime Industry” (In Portuguese), The Sea and the Challenges of the Future, Guedes Soares, C. e Beirão Reis, J. (Eds.), Edições Salamandra, Lda, Lisbon, pp. 431-448

 • Gordo, J.M. and Guedes Soares, C. (2000), “Effects of the Geometry and Residual Stresses on the Compressive Strength of Stiffened Panels” (In Portuguese), The Sea and the Challenges of the Future, Guedes Soares, C. and Beirão Reis, J. (Eds.), Edições Salamandra, Lda., Lisbon, pp. 279-292

 • Guedes Soares, C., Faúlha, A.Q. and Antão, R. (2000), “Behaviour of Fiber Reinforced Composite Materials Subjected to Impact” (In Portuguese), The Sea and the Challenges of the Future, Guedes Soares, C. e J. Beirão Reis (Eds.), Edições Salamandra, Lda., Lisbon, pp. 293-310

 • Guedes Soares, C., Faúlha, A.Q. and Antão, R. (2000), “Behaviour of Fiber Reinforced Composite Materials Subjected to Impact” (In Portuguese), The Sea and the Challenges of the Future, Guedes Soares, C. e J. Beirão Reis (Eds.), Edições Salamandra, Lda., Lisbon, pp. 293-310

 • Leite, R., Garbatov, Y. and Guedes Soares, C. (2002), “Finite Element Analysis of a Trapezoidal Stiffener under Fadigue Load” (In Portuguese), O Mar Fonte de Desenvolvimento Sustentado, Guedes Soares, C., Beirão Reis, J. e Martins Guerreiro, M.B. (Eds.), Edições Salamandra, Lda., Lisboa, pp. 369-383

 • Macário, P., Garbatov, Y. and Guedes Soares, C. (2002), “Structural analysis of a fishing vessel” (In Portuguese), The Sea, Source of Sustainable Development (in Portuguese), Guedes Soares, C., Beirão Reis, J. and Martins Guerreiro, M.B. (Eds.), Edições Salamandra, Lda., Lisbon, pp. 111-128

 • Centeno, R., Oliveira, A., Fonseca, N. and Guedes Soares, C. (2002), “Design of a Purse Seiner in Composite Materials” (In Portuguese), The Sea, Source of Sustainable Development, Guedes Soares, C., Beirão Reis, J. and Martins Guerreiro, M.B. (Eds.), Edições Salamandra, Lda., Lisboa, pp. 95-109

 • Dimas, D. and Guedes Soares, C. (2002), “Collision Modelling and Design of Ships” (In Portuguese), The Sea, Source of Sustainable Development, Guedes Soares, C., Beirão Reis, J. and Martins Guerreiro, M. B. (Eds.), Edições Salamandra, Lda., Lisbon, pp. 347-368

 • Gordo, J.M. and Guedes Soares, C. (2002), “Effect of the Initial Imperfections on the Plate Strength” (In Portuguese), The Sea, Source of Sustainable Development, Guedes Soares, C., Beirão Reis, J. and Martins Guerreiro, M. B. (Eds.), Edições Salamandra, Lda., Lisbon, pp. 385-406

 • Leite, R., Garbatov, Y. and Guedes Soares, C. (2002), “Finite Element Analysis of a Trapezoidal Stiffener under Fadigue Load” (In Portuguese), The Sea, Source of Sustainable Development, Guedes Soares, C., Beirão Reis, J. and Martins Guerreiro, M. B. (Eds.), Edições Salamandra, Lda., Lisbon, pp. 369-383

 • Macário, P., Garbatov, Y. and Guedes Soares, C. (2002), “Structural analysis of a fishing vessel” (In Portuguese), The Sea, Source of Sustainable Development, Guedes Soares, C., Beirão Reis, J. and Martins Guerreiro, M. B. (Eds.), Edições Salamandra, Lda., Lisbon, pp. 111-128

 • Varela, J.M. and Guedes Soares, C. (2002), “Virtual Visualization and Propagation Control of Ship Fluids” (In Portuguese), The sea, source of sustainable development, Guedes Soares, C., J. Beirão Reis and M. B. Martins Guerreiro (Eds.), Edições Salamandra, Lda., Lisbon, pp.477-490

 • Ferraris, S., Fonseca, N., Hayman, B., Hughes, O., Thiberge, E., Toyama, Y., Vredeveldt, A. and Yang, P. (2003), “Structural Design of High Speed Vehicles”, Ship and Offshore Structures Congress (ISSC 2003), 11-15 Agosto, San Diego, USA, Vol. 2, Committee V.4, pp. 109-147

 • Ferraris, S., Fonseca, N., Hayman, B., Hughes, O., Thiberge, E., Toyama, Y., Vredeveldt, A. and Yang, P. (2003), “Structural Design of High Speed Vehicles”, Ship and Offshore Structures Congress (ISSC 2003), 11-15 Agosto, San Diego, USA, Vol. 2, Committee V.4, pp. 109-147

 • Esteves, R. and Gordo, J.M. (2004), “Vibration analysis in a self-service of a passenger ship” (In Portuguese), Maritime Activities and Engineering, Guedes Soares, C. and Gonçalves de Brito, V. (Eds), Edições Salamandra, Lda., Lisbon, pp. 285-298

 • Santos, J.M., Sutherland, L.S. and Guedes Soares, C. (2004), “Characterization tests of the mechanical properties of composite materials” (In Portuguese), Maritime Activities and Engineering, Guedes Soares, C. and Gonçalves de Brito, V. (Eds), Edições Salamandra, Lda., Lisbon, pp. 137-150

 • Esteves, R. and Gordo, J.M. (2004), “The Comfort Class according to the Classification Societies” (In Portuguese), Maritime Activities and Engineering , Guedes Soares, C. and Gonçalves de Brito, V. (Eds), Edições Salamandra, Lda., Lisbon, pp. 679-690

 • Teixeira, A.P., Luís, R.M. and Guedes Soares, C. (2004), “Prediction of the compressive strength of corroded plates of the strength of plates with corrosion subject to impact” (In Portuguese), Maritime Activities and Engineering, Guedes Soares, C. and Gonçalves de Brito, V. (Eds), Edições Salamandra, Lda., Lisbon, pp. 271-284

 • Varela, J.M. and Guedes Soares, C. (2004), “Virtual ship support model to avoid ship failure” (In Portuguese), Maritime Activities and Engineering, Guedes Soares, C. and Gonçalves de Brito, V. (Eds), Edições Salamandra, Lda, Lisbon, pp. 713-725, Edições Salamandra, Lda., Lisbon, Portugal, pp. 713-725

 • Varela, J.M. and Guedes Soares, C. (2004), “Virtual ship support model to avoid ship failure” (In Portuguese), Maritime Activities and Engineering, (in Portuguese), Guedes Soares, C. and Gonçalves de Brito, V. (Eds), Edições Salamandra, Lda, Lisbon, pp. 713-725

 • Garbatov, Y., Santos, J.M. and Guedes Soares, C. (2005), “Effect of Truck Induced Load on Welded Structural Joints Subjected to Fatigue”, Maritime Transportation and Exploitation of Ocean and Coastal Resources, Guedes Soares, C., Garbatov, Y. and Fonseca, N. (Eds.), Taylor & Francis, London-UK, Vol. 1, pp. 413-422

 • Garbatov, Y., Tomasevic, S. and Guedes Soares, C. (2005), “Fatigue Damage Assessment of a Newly Built FPSO Hull”, Maritime Transportation and Exploitation of Ocean and Coastal Resources, 2005, Guedes Soares, C., Garbatov, Y. and Fonseca, N. (Eds.), Taylor & Francis Group, London, U.K., Vol. 1, pp. 423-428

 • Dimas, D. and Guedes Soares, C. (2005), “Experimental study of failure in pre-notched beams under transverse impact”, Maritime Transportation and Exploitation of Ocean and Coastal Resources, 2005, Guedes Soares, C., Garbatov, Y. and Fonseca, N. (Eds.), Taylor & Francis Group, London, UK, Vol. 1, pp. 387-394

 • Guedes Soares, C., Teixeira, A.P., Luís, R.M., Quesnel, T., Nikolov, P.I., Steen, E., Khan, I.A., Toderan, C., Olaru, V.D., Bollero, A. and Taczala, M. (2005), “Effect of the shape of localized imperfections on the collapse strength of plates”, Maritime Transportation and Exploitation of Ocean and Coastal Resources, Guedes Soares, C., Garbatov, Y., Fonseca, N. (Eds.), Taylor & Francis Group, London, U.K., Vol. 1, pp. 429-438

 • Sutherland, L.S. and Guedes Soares, C. (2005), “Impact on Single-Skin Marine Composites”, Maritime Transportation and Exploitation of Ocean and Coastal Resources, 2005, Guedes Soares, C., Garbatov, Y. and Fonseca, N. (Eds.), Taylor & Francis Group, London, U.K., Vol. 1, pp. 535-542

 • Varela, J.M. and Guedes Soares, C. (2005), “Survey of Techniques for Real-Time Visualization of the Ocean Surface”, Maritime Transportation and Exploitation of Ocean and Coastal Resources, Guedes Soares, C., Garbatov, Y. e Fonseca, N. (Eds.), Francis & Taylor Group, London, UK, Vol. 2, pp. 1167-1174

 • Sutherland, L.S. and Guedes Soares, C. (2005), “Impact on Single-Skin Marine Composites”, Maritime Transportation and Exploitation of Ocean and Coastal Resources, Guedes Soares, C., Garbatov, Y. e Fonseca, N. (Eds.), Taylor & Francis Group, London, UK, Vol. 1, pp. 535-542

 • Varela, J.M. and Guedes Soares, C. (2006), “Real time visualization of the sea surface by using directional wave spectra” (In Portuguese), Innovation and Development in the Maritime Activities, Guedes Soares, C. and Brito, V.G. (Eds.), Edições Salamandra, Lda., Lisbon, Portugal, Vol. XIV, pp. 703-716

 • Santos, C. and Garbatov, Y. (2006), “Structural Analysis of the Slamming Effect on High Speed Vessels” (In Portuguese), Innovation and Development in the Maritime Activities (in Portuguese), Guedes Soares, C. and Brito, V. G. (Eds.), Edições Salamandra, Lda., Lisbon, Portugal, pp. 717-732

 • Gaspar, B. and Garbatov, Y. (2006), “Automating the Structural Design and Analysis of Tankers” (In Portuguese), Innovation and Development in the Maritime Activities, Guedes Soares, C. and Brito, V. G. (Eds.), Edições Salamandra, Lda., Lisbon, Portugal, pp. 747-764

 • Gordo, J.M., Silva Carvalho, I., Leiria de Lima, J. and Guedes Soares, C. (2006), “Modelling the costs of steel cutting and welding in Ship Repair” (In Portuguese), Innovation and Development in the Maritime Activities (in Portuguese), Guedes Soares, C. and Brito, V. G. (Eds.), Edições Salamandra, Lda., Lisbon, Portugal, pp. 905-917

 • Dimas, D. and Guedes Soares, C. (2006), “Survey of deformations in Stiffened Panels by Digital Photography” (In Portuguese), Innovation and Development in the Maritime Activities, Guedes Soares, C. and Brito, V. G. (Eds.), Edições Salamandra, Lda., Lisbon, Portugal, pp. 765-780

 • Yao, T., Brunner, E., Cho, S. R., Choo, Y. S., Czujko, J., Estefen, S. F., Gordo, J. M., Hess, P. E., Haar, H., Pu, Y., Rigo, P. and Wan, Z. Q. (2006), “Ultimate Strength”, Ship and Offshore Structures Congress (ISSC 2006), Frize, P. A. and Shenoi, R. A. (Eds.), 20-25 August, Southampton - UK, Vol. 1, Committee III.1, pp. 359-443

 • Gordo, J.M. and Guedes Soares, C. (2007), “Experimental Evaluation of the Behaviour of a Mild Steel Box Girder under Bending Moment”, Advancements in Marine Structures, Guedes Soares, C. and Das, P.K. (Eds.), Taylor & Francis Group, London, UK, pp. 377-383

 • Guedes Soares, C., Chen, N.-Z., Santos, F.M. and Santos, C. (2007), “An Experimental and Numerical Study on GFRP Box Girder under Pure Bending”, Advancements in Marine Structures, Guedes Soares, C. and Das, P. K. (Eds.), Taylor & Francis Group, London, U.K., pp. 385-390

 • Dimas, D. and Guedes Soares, C. (2007) , “Numerical Study of the Absorbed Energy in Clamped Beams with Different Lengths under Transverse Impact”, Advancements in Marine Structures, Guedes Soares, C. and Das, P. K. (Eds.), Taylor & Francis Group, London, U.K., pp. 357-366

 • Luís, R.M., Guedes Soares, C. and Nikolov, P.I. (2008), “Collapse Strength of Longitudinal Plate Assemblies with Dimple Imperfections”, Advancements in Marine Structures, Guedes Soares, C. and Das, P. K. (Eds.), Taylor & Francis Group, London, U. K., pp. 207-215

 • Fricke, W., Bollero, A., Chirica, I., Garbatov, Y., Jancart, F., Kahl, A., Remes, H., Rizzo, C.M., von Selle, H., Urban, A. and Wei, L. (2008), “Round Robin Study on Structural Hot-Spot and Effective Notch Stress Analysis”, Advancements in Marine Structures, Guedes Soares, C. and Das, P. K. (Eds.), Taylor & Francis Group, London, U. K., pp. 159-167

 • Garbatov, Y., Tomasevic, S. e Guedes Soares, C. (2007), “Fatigue Strength Assessment of Floating Production Storage and Unloading Vessels”, Advancements in Marine Structures, Guedes Soares, C. and Das, P. K. (Eds.), Taylor & Francis Group, London, U.K., pp. 169-176

 • Dimas, D. and Guedes Soares, C. (2007) , “Numerical Study of the Absorbed Energy in Clamped Beams with Different Lengths under Transverse Impact”, Advancements in Marine Structures, Guedes Soares, C. and Das, P. K. (Eds.), Taylor & Francis Group, London, U.K., pp. 357-366

 • Gordo, J.M. and Guedes Soares, C. (2007), “Experimental Evaluation of the Behaviour of a Mild Steel Box Girder under Bending Moment”, Advancements in Marine Structures, Guedes Soares, C. and Das, P.K. (Eds.), Taylor & Francis Group, London, UK, pp. 377-383

 • Guedes Soares, C., Chen, N.-Z., Santos, F.M. and Santos, C. (2007), “An Experimental and Numerical Study on GFRP Box Girder under Pure Bending”, Advancements in Marine Structures, C. Guedes Soares and P. K. Das (Eds.), London – UK, pp. 385-390

 • Guedes Soares, C., Chen, N.-Z., Santos, F.M. and Santos, C. (2007), “An Experimental and Numerical Study on GFRP Box Girder under Pure Bending” , Advancements in Marine Structures, C. Guedes Soares and P. K. Das (Eds.), London – UK, pp. 385-390

 • Sutherland, L.S. and Guedes Soares, C. (2008), “Scaling of Impact on Glass-Polyester Laminated Plates”, Maritime Industry, Ocean Engineering and Coastal Resources, 2008, Guedes Soares, C. and Kolev, P. (Editors), Taylor & Francis Group, London, U.K., pp. 293-300

 • Varela, J.M., and Ventura, M. (2008), “Generation of triangular mesh representing ship hulls with NURBS surfaces” (In Portuguese), The Portuguese Maritime Sector, Guedes Soares, C. and Costa Monteiro, C. (Eds.), Edições Salamandra, Lda., Lisbon

 • Chakarov, K., Garbatov, Y. and Guedes Soares, C. (2008), “Hot-Spot Stress Analysis of Deck Structures Subjected to Corrosion and Fatigue”, Maritime Industry, Ocean Engineering and Coastal Resources, 2008, Guedes Soares, C. and Kolev, P. (Eds.), Taylor & Francis Group, London, U.K, pp. 153-160

 • Sutherland, L.S. and Guedes Soares, C. (2008), “Scaling of Impact on Glass-Polyester Laminated Plates”, Maritime Industry, Ocean Engineering and Coastal Resources, 2008, Guedes Soares, C. and Kolev, P. (Editors), Taylor & Francis Group, London, U.K., pp. 293-300

 • Gaspar, B., Garbatov, Y. and Guedes Soares, C. (2008), “Structural Analysis of Hull Tankers Based on the IACS Regulations” (In Portuguese), The Portuguese Maritime Sector, Edições Salamandra, Lda., Lisbon, Portugal

 • Franco, R., Sutherland, L.S. and Guedes Soares, C.(2008), “The Resin Infusion Process for Marine Application” (In Portuguese), The Portuguese Maritime Sector, Edições Salamandra, Lda., Lisbon

 • Teixeira, A.P. and Guedes Soares, C. (2008), “Predicting the Strength of Plates with ship type Initial Imperfections” (In Portuguese), The Portuguese Maritime Sector, Edições Salamandra, Lda., Lisbon

 • Hussein, A.W. and Guedes Soares, C. (2009), “Sensitivity analysis of the ultimate limit state variables for a tanker and a bulk carrier”, Analysis and Design of Marine Structures, Guedes Soares, C. and Das, P. K. (Eds.); Taylor & Francis Group, London, U. K., pp. 513-522

 • Saad-Eldeen, S. and Guedes Soares, C. (2009), “Effect of Pitting Corrosion on the Collapse Strength of Rectangular Plates under Axial Compression”, Analysis and Design of Marine Structures, Guedes Soares, C. and Das, P.K. (Eds.), Taylor & Francis Group, London, UK, pp 231-236

 • Sutherland, L.S. and Guedes Soares, C. (2009), “Impact behaviour of GRP, aluminium and steel plates”, Analysis and Design of Marine Structures, Guedes Soares, C. and Das, P. K. (Eds.); Taylor & Francis Group, London, U.K., pp. 293-300

 • Witkowska, M. and Guedes Soares, C. (2009), “Ultimate strength of stiffened plates with local damage on the stiffener”, Analysis and Design of Marine Structures, Guedes Soares, C. and Das, P. K. (Eds.); Taylor & Francis Group, London, U.K., pp. 145-154

 • Guedes Soares, C. (2009), “Evolution of the Design Process and the Codes of Ship Structures”, The 90th Anniversary Conference - Vision of Engineering, Fakultet Strojarstva i Brodogragnje, Zagreb, Croatia, pp. 86-103

 • Varela, J.M., Ventura, M., and Guedes Soares, C. (2009), “Digital prototyping of hull structures in basic design” (In Portuguese), Analysis and Design of Marine Structures, Guedes Soares, C. and Das, P. K. (Eds.), Taylor & Francis Group, London, U.K., pp. 457-465

 • Corak, M., Parunov, J., Teixeira, A. P. and Guedes Soares, C. (2010), “Performance of the Common Structural Rules design formulations for the ultimate strength of uniaxially loaded plates and stiffened panels”, Advanced Ship Design for Pollution Prevention, Guedes Soares & Parunov (eds), Taylor & Francis Group, London, pp. 113-120

 • Barradas Cardoso, J.E., Valido, A.J. and Moita, P.P. (2011), “Optimal design and control of nonlinear structures and mechanical systems”, Maritime Engineering and Technology, Guedes Soares et al. (Eds),Taylor & Francis Group, London, pp. 803-816

 • Sutherland, L.S. and Guedes Soares, C. (2011), “Impact on Marine Composite Laminated Materials”, Maritime Engineering and Technology, Guedes Soares et al. (Eds),Taylor & Francis Group, London, pp. 979-991

 • Teixeira, A.P., Parunov, J. and Guedes Soares, C. (2011), “Assessment of Ship Structural Safety”, Marine Technology and Engineering, C. Guedes Soares, Y. Garbatov, N. Fonseca, A.P. Teixeira (Eds.), Taylor & Francis Group, London, UK, pp. 1377-1394

 • Garbatov, Y., Rudan, S., Gaspar, B. and Guedes Soares, C. (2011), “Fatigue Assessment of Marine Structures”, Maritime Engineering and Technology, Guedes Soares et al. (Eds),Taylor & Francis Group, London, pp. 865-888

 • Ventura, M. and Guedes Soares, C. (2011), “Geometric Modelling and Product Data Management in Ship Design”, Marine Technology and Engineering, C. Guedes Soares, Y. Garbatov, N. Fonseca, A.P. Teixeira (Eds.), Taylor & Francis Group, London, UK, pp. 1019-1044

 • Gordo, J.M., Teixeira, A.P. and Guedes Soares, C. (2011), “Ultimate strength of ship structures”, Marine Technology and Engineering, C. Guedes Soares, Y. Garbatov, N. Fonseca, A.P. Teixeira (Eds.), Taylor & Francis Group, London, UK, pp. 889-900

 • Villavicencio, R., Liu, Z., Amdahl, J. and Guedes Soares, C. (2011), “Influence of the neutral axis displacement on the residual strength of a damaged tanker double bottom structure”, Advances in Marine Structures, C. Guedes Soares and W. Fricke, (Eds.), Taylor & Francis Group, London, UK, pp. 411-418

 • Xu, M.C. and Guedes Soares, C. (2011), “Numerical study of the effect of geometry and boundary conditions on the collapse behaviour of short stiffened panels”, Maritime Engineering and TechnolAdvances in Marine Structures, C. Guedes Soares and W. Fricke, (Eds.), Taylor & Francis Group, London, UK, pp. 229-237

 • Silva, J.E., Garbatov, Y. and Guedes Soares, C. (2011), “Ultimate strength assessment of ageing steel plates subjected to random non-uniform corrosion wastage”, Advances in Marine Structures, C. Guedes Soares and W. Fricke, (Eds.), Taylor & Francis Group, London, UK, pp. 213-220

 • Fricke, W., Codda, M., Feltz, O., Garbatov, Y., Remes, H., Risso, G., Rizzo, C. and Romanoff, J. (2011), “Round-robin on local stress determination and fatigue assessment of load-carrying fillet-welded joints”, Advances in Marine Structures, C. Guedes Soares and W. Fricke, (Eds.), Taylor & Francis Group, London, UK, pp. 295-302

 • Xu, M.C. and Guedes Soares, C. (2011), “Comparison of Numerical Results with Experiments on Ultimate Strength of Short Stiffened Panels”, Advances in Marine Structures, C. Guedes Soares and W. Fricke, (Eds.), Taylor & Francis Group, Londres, UK, pp. 221-228

 • Villavicencio, R. and Guedes Soares, C. (2011), “Numerical prediction of impact loads in rectangular panels”, Advances in Marine Structures, C. Guedes Soares and W. Fricke, (Eds.), Taylor & Francis Group, London, UK, pp. 399-409

 • Villavicencio, R., Sutherland, L.S. and Guedes Soares, C. (2011), “Numerical simulation of laterally impacted clamped circular steel plates”, Advances in Marine Structures, C. Guedes Soares and W. Fricke, (Eds.), Taylor & Francis Group, London, UK, pp. 419-427

 • Saad-Eldeen, S., Garbatov, Y. and Guedes Soares, C. (2011), “Failures mode analysis of corroded steel structures subjected to compressive load”, Advances in Marine Structures, C. Guedes Soares and W. Fricke, (Eds.), Taylor & Francis Group, London, UK, pp. 503-510

 • Garbatov, Y., Tekgoz, M. and Guedes Soares, C. (2011), “Uncertainty assessment of the ultimate strength of a stiffened panel”, Advances in Marine Structures, C. Guedes Soares and W. Fricke, (Eds.), Taylor & Francis Group, London, UK, pp. 659-668

 • Chen, N-Z., Wang, G., Guedes Soares, C., and Teixeira, A.P. (2011), “Combination of primary loading effects under various wave scatter diagrams”, Advances in Marine Structures, C. Guedes Soares and W. Fricke, (Eds.), Taylor & Francis Group, London, UK, pp. 651-657

 • Boote, D., Beck, R., Blake, J.I.R., Flay, R., Hage, A., Jeong, H.K., Keuning, J.A., Miller, P., Sutherland, L.S. and Yan, R.J., (2012), “Committee V.8 - Yacht Design”, Proceedings of the 18th International Ship and Offshore Structures Congress (ISSC), 2012, W. Fricke, R. Bronsart (eds.), Schiffbautechnische Gesellschaft, Hamburg, pp. 331-396

 • Xu, M.C. and Guedes Soares, C. (2012), “Numerical study of the effect of geometry and boundary conditions on the collapse behaviour of long stiffened panels”, Maritime Engineering and Technology, Guedes Soares, C., Garbatov, Y., Sutulo, S., Santos, T.A. (Eds.), Taylor and Francis Group, pp. 415-422

 • Lourenço, R. and Gordo, J. M. (2012), “Automatic method of shells' fairing for the application of thermal forming process” (In Portuguese), Engenharia e Tecnologia Maritima, C. Guedes Soares e N. A. Santos (eds.), Salamandra, Lisboa, pp. 163-172

 • Gordo, J.M. (2012), “Ultimate compressive strength of double bottom under alternate cargo holds” (In Portuguese), Engenharia e Tecnologia Maritima, C. Guedes Soares e N. A. Santos (eds.), Salamandra, Lisboa, pp. 151-162

 • Schipperen, I., Andric, J., Brennan, D., Caprace, J.D., Chou, C.M., Gordo, J.M., Lee, J.H., Li, L., Liu, S., Okada, T., Pires, F. and Yu, M. (2012), “Materials and Fabrication Technology”, 18th International Ship and Offshore Structures Congress (ISSC 2012), W. Fricke & R. Bronsart , (Eds.), Elsevier, pp. 113-152

 • Dow, R., Ashe, G., Broekhuijsen, J., Doig, R., Fredriksen, A., Imakita, A., Jeon, W.S., Leguin, J.F., Liu, J.H., Pegg, N., Ribeiro e Silva, S., Truelock, D.W. and Viego, F. (2012), “Naval Vessels”, 18th International Ship and Offshore Structures Congress (ISSC 2012), W. Fricke & R. Bronsart , (Eds.), Elsevier, pp. 201-242

 • Saad-Eldeen, S., Garbatov, Y. and Guedes Soares, C. (2012), “Influence of Weld Toe Shape and Material Models on the Ultimate Strength of a Slightly Corroded Box Girder”, Sustainable Maritime Transportation and Exploitation of Sea Resources, E. Rizzuto & C. Guedes Soares, (Eds.), Taylor and Francis Group, pp. 401-409

 • Huang, W., Garbatov, Y. and Guedes Soares, C. (2012), “Fatigue damage assessment of stiffener-frame structure”, Maritime Engineering and Technology, Guedes Soares et al. (Eds),Taylor & Francis Group, London, 2012, PP301-307

 • Adak, M. and Guedes Soares, C. (2012), “Influences of Boundary Constraints on the Residual Stresses and deformations in a High Strength Steel Plate after Welding”, Maritime Engineering and Technology, Guedes Soares et al. (Eds),Taylor & Francis Group, London, 2012, PP253-260

 • Chen, B.Q., Adak, M. and Guedes Soares, C. (2012), “Numerical Investigations to Study the Effect of Weld Parameters on the Temperature-time History in steel plates”, chnology, Guedes Soares et al. (Eds),Taylor & Francis Group, London, pp. 285-292

 • Chen, B.Q., Garbatov, Y. and Guedes Soares, C. (2012), “Mechanical Properties Assessment of Specimens Subjected to Random Non-uniform General Corrosion and Tensile Load”, Maritime Engineering and Technology, Guedes Soares et al. (Eds),Taylor & Francis Group, London, 2012, PP293-299

 • Tekgoz, M., Garbatov, Y. and Guedes Soares, C. (2012), “Ultimate strength assessment accounting for the effect of finite element modelling”, Maritime Engineering and Technology, Guedes Soares et al. (Eds),Taylor & Francis Group, London, 2012, PP323-329

 • Mantari, J.L., Oktem, A.S. and Guedes Soares, C. (2012), “A new trigonometric shear deformation theory for sandwich and composite laminated plates”, Maritime Engineering and Technology, Guedes Soares et al. (Eds),Taylor & Francis Group, London, 2012, PP317-322

 • Nguyen, K.T., Garbatov, Y. and Guedes Soares, C. (2012), “Fatigue damage assessment of a tanker structural detail based on the effective notch stress approach”, Maritime Engineering and Technology, Guedes Soares et al. (Eds),Taylor & Francis Group, London, 2012, PP363-373

 • Ruas, J.C. and Ventura, M. (2012), “Non-linear optimization applied to preliminary ship design”, Maritime Engineering and Technology, Guedes Soares et al. (Eds),Taylor & Francis Group, London, 2012, PP079-085

 • Saad-Eldeen, S., Garbatov, Y. and Guedes Soares, C. (2012), “FE Parameters Estimation and Analysis of Ultimate Strength of Box Girder”, Maritime Engineering and Technology, Guedes Soares et al. (Eds),Taylor & Francis Group, London, 2012, PP331-338

 • Liu, B. and Guedes Soares, C. (2012), “Study on the ultimate torsional strength of ship hulls”, Maritime Engineering and Technology, Guedes Soares et al. (Eds),Taylor & Francis Group, London, 2012, PP309-316

 • Tekgoz, M., Garbatov, Y. and Guedes Soares, C. (2012), “Ultimate strength assessment accounting for the effect of finite element modelling”, Maritime Engineering and Technology, Guedes Soares et al. (Eds),Taylor & Francis Group, London, pp.353-362

 • Silveira, P.A.M., Teixeira, A.P. and Guedes Soares, C. (2012), “Analysis of maritime traffic off the coast of Portugal”, Maritime Engineering and Technology, C. Guedes Soares, Y. Garbatov, S. Sutulo, T.A. Santos, (Eds.), Taylor and Francis Group, pp. 35-41

 • Villavicencio, R., Amdahl, J. and Guedes Soares, C. (2012), “Strength of a tanker double bottom in various grounding scenarios”, Maritime Engineering and Technology, Guedes Soares et al. (Eds),Taylor & Francis Group, London, pp.375-380

 • Villavicencio, R. and Guedes Soares, C. (2012), “Review of material relations for marine structures collision simulations”, Maritime Engineering and Technology, Guedes Soares et al. (Eds),Taylor & Francis Group, London, pp.381-392

 • Villavicencio, R., Liu, B. and Guedes Soares, C. (2012), “Response of stiffeners with attached plate subjected to lateral impact”, Maritime Engineering and Technology, Guedes Soares et al. (Eds),Taylor & Francis Group, London, pp.393-398

 • Xu, M.C. and Guedes Soares, C. (2012), “Comparison of numerical results with experiments on ultimate strength of stocky stiffened panels”, Maritime Engineering and Technology, Guedes Soares et al. (Eds),Taylor & Francis Group, London, pp.407-414

 • Mantari, J.L., Oktem, A.S. and Guedes Soares, C. (2012), “Layerwise finite element formulation for the analysis of laminates and sandwich panels”, Maritime Engineering and Technology, Guedes Soares, C., Garbatov, Y., Sutulo, S., Santos, T.A. (Eds.), Taylor and Francis Group, pp. 323-329

 • Saad-Eldeen, S., Garbatov, Y. and Guedes Soares, C. (2012), “Influence of Weld Toe Shape and Material Models on the Ultimate Strength of a Slightly Corroded Box Girder”, Sustainable Maritime Transportation and Exploitation of Sea Resources, E. Rizzuto & C. Guedes Soares, (Eds.), Taylor and Francis Group, pp. 401-409

 • Gordo, J.M. and Guedes Soares, C. (2013), “Experiments on three mild steel box girders of different spans under pure bending moment”, Analysis and Design of Marine Structures, Guedes Soares & Romanoff (eds.),Taylor & Francis Group, London, pp. 337-346

 • Liu, B., Villavicencio, R. and Guedes Soares, C. (2013), “Failure characteristics of strength-equivalent aluminium and steel plates in impact conditions”, Analysis and Design of Marine Structures, Guedes Soares & Romanoff (eds.),Taylor & Francis Group, London, pp. 167-174

 • Liu, B., Villavicencio, R. and Guedes Soares, C. (2013), “Shear and tensile failure of thin aluminium plates struck by cylindrical and spherical indenters”, Analysis and Design of Marine Structures, C. Guedes Soares and J. Romanoff, (Eds.), Taylor & Francis, UK, pp. 175-186

 • Tekgoz, M., Garbatov, Y. and Guedes Soares, C. (2013), “Finite Element Modelling of the Ultimate Strength of Stiffened Plates with Residual Stress”, Analysis and Design of Marine Structures, Guedes Soares & Romanoff (eds.), Taylor & Francis Group, London, pp. 309-317

 • Gordo, J.M. (2014), “Residual stresses relaxation of welded structures under alternate loading”, Developments in Maritime Transportation and Exploitation of Sea Resources, Guedes Soares, C. and López Peña F. (Eds.). Francis & Taylor Group, London, UK, pp. 317-328

 • Chen, B.Q., Hashemzadeh, M. e Guedes Soares, C. (2014) , “Numerical analysis of the effects of weld parameters on distortions and residual stresses in butt welded steel plates”, Developments in Maritime Transportation and Exploitation of Sea Resources, Guedes Soares, C. and López Peña F. (Eds.). Francis & Taylor Group, London, UK, pp. 309-320

 • Yeter, B., Garbatov, Y. and Guedes Soares, C. (2014), “Spectral fatigue assessment of an offshore wind turbine structure under wave and wind”, Developments in Maritime Transportation and Exploitation of Sea Resources, Guedes Soares, C. and López Peña F. (Eds.). Francis & Taylor Group, London, UK, pp. 425-434

 • Yeter, B., Garbatov, Y. and Guedes Soares, C. (2014), “Fatigue damage analysis of a fixed offshore wind turbine supporting structure”, Developments in Maritime Transportation and Exploitation of Sea Resources, Guedes Soares, C. and López Peña F. (Eds.). Francis & Taylor Group, London, UK, pp. 415-424

 • Villavicencio, R. and Guedes Soares, C. (2014), “Analysis of collisions between tugs and tankers”, Developments in Maritime Transportation and Exploitation of Sea Resources, Guedes Soares, C. and López Peña F. (Eds.). Francis & Taylor Group, London, UK, pp. 405-414

 • Ventura, M. (2014), “Ship dimensioning in the initial design”, Developments in Maritime Transportation and Exploitation of Sea Resources, Guedes Soares, C. and López Peña F. (Eds.). Francis & Taylor Group, London, UK, pp. 531-542

 • Tekgoz, M., Garbatov, Y. and Guedes Soares, C. (2014), “Ultimate strength of a plate accounting for shakedown effect and corrosion degradation”, Developments in Maritime Transportation and Exploitation of Sea Resources, Guedes Soares, C. and López Peña F. (Eds.). Francis & Taylor Group, London, UK, pp. 395-404

 • Saad-Eldeen, S., Garbatov, Y. and Guedes Soares, C. (2014), “Ultimate strength assessment of steel plates with a large opening”, Developments in Maritime Transportation and Exploitation of Sea Resources, Guedes Soares, C. and López Peña F. (Eds.). Francis & Taylor Group, London, UK, pp. 373-380

 • Hussein, A.W. and Guedes Soares, C. (2014), “Analysis of the relative importance of ultimate limit state variables in the reliability analysis of tankers and bulk carriers”, Developments in Maritime Transportation and Exploitation of Sea Resources, Guedes Soares, C. and López Peña F. (Eds.). Francis & Taylor Group, London, UK, pp. 711-720

 • Hashemzadeh, M., Chen, B.Q. and Guedes Soares, C. (2014), “Comparison between Different Heat Source Types in Thin-Plate Welding Simulation”, Developments in Maritime Transportation and Exploitation of Sea Resources, Guedes Soares, C. and López Peña F. (Eds.). Francis & Taylor Group, London, UK, pp. 329-336

 • Gaspar, B., Teixeira, A.P. and Guedes Soares, C. (2015), “Effect of the aspect ratio on the ultimate compressive strength of plate elements with non-uniform corrosion”, Analysis and Design of Marine Structures, Guedes Soares, C. & Shenoi R.A. (Eds.), Taylor & Francis, London, UK, pp. 765-774, 2015

 • Garbatov, Y., Saad-Eldeen, S. and Guedes Soares, C. (2015), “Hull Girder Ultimate Strength Assessment based on Experimental Results and the Dimensional Theory”, Engineering Structures, Vol. 100, pp. 742-750

 • Ventura, M. and Guedes Soares, C. (2015), “Integration of a voyage model concept into a ship design optimization procedure”, Guedes Soares, C., Dejhalla, R. and Pavletić, D. (Eds.), Towards Green Marine Technology and Transport, Taylor & Francis Group, London, UK, pp. 539-550

 • Tadros, M., Ventura, M. and Guedes Soares, C. (2015), “Numerical simulation of two-stroke marine diesel engine”, Guedes Soares, C. Dejhalla R. and Pavletiæ D., (Eds.), Towards Green Marine Technology and Transport, Taylor & Francis Group, London, UK, pp. 609-617

 • Dong, Y. and Guedes Soares, C. (2015), “Estimation of effective notch strain for fatigue strength assessment of welded structures under multiaxial stress state”, Guedes Soares, C. Dejhalla R. and Pavletiæ D., (Eds.), Towards Green Marine Technology and Transport, Taylor & Francis Group, London, UK, pp. 397-406

 • Dong, Y. and Guedes Soares, C. (2015), “On the fatigue crack initiation point of load-carrying fillet welded joints”, Guedes Soares, C. Dejhalla R. and Pavletiæ D., (Eds.), Towards Green Marine Technology and Transport, Taylor & Francis Group, London, UK, pp. 407-418

 • Gordo, J.M. and Guedes Soares, C. (2015), “Degradation of long plate’s ultimate strength due to variation on the shape of initial imperfections”, Guedes Soares, C. Dejhalla R. and Pavletiæ D., (Eds.), Towards Green Marine Technology and Transport, Taylor & Francis Group, London, UK, pp. 345-354

 • Gordo, J.M. and Guedes Soares, C. (2015), “Ultimate bending moment of a double span box girder with narrow stiffener’ spacing”, Guedes Soares, C. Dejhalla R. and Pavletiæ D., (Eds.), Towards Green Marine Technology and Transport, Taylor & Francis Group, London, UK, pp. 355-363

 • Saad-Eldeen, S., Garbatov, Y. and Guedes Soares, C. (2015), “Ultimate strength of a box girder with a large opening subjected to flooding and bending load”, Guedes Soares, C. Dejhalla R. and Pavletiæ D., (Eds.), Towards Green Marine Technology and Transport, Taylor & Francis Group, London, UK, pp. 335-344

 • Saad-Eldeen, S., Garbatov, Y. and Guedes Soares, C. (2015), “Ultimate strength of a corroded box girder subjected to pure bending and a non-propagating crack”, Guedes Soares, C. Dejhalla R. and Pavletiæ D., (Eds.), Towards Green Marine Technology and Transport, Taylor & Francis Group, London, UK, pp. 373-380

 • Tekgoz, M., Garbatov, Y. and Guedes Soares, C. (2015), “Strength assessment of a single hull damaged tanker ship subjected to asymmetrical bending loading”, Guedes Soares, C. Dejhalla R. and Pavletiæ D., (Eds.), Towards Green Marine Technology and Transport, Taylor & Francis Group, London, UK, pp. 327-334

 • Yeter, B., Garbatov, Y. and Guedes Soares, C. (2015), “Low cycle fatigue assessment of offshore wind turbine monopile supporting structure subjected to wave-induced loads”, Guedes Soares, C. Dejhalla R. and Pavletiæ D., (Eds.), Towards Green Marine Technology and Transport, Taylor & Francis Group, London, UK, 2015, pp. 287-294

 • Yeter, B., Garbatov, Y. and Guedes Soares, C. (2015), “Assessment of the retardation of in-service cracks in offshore welded structures subjected to variable amplitude load”, Renewable Energies Offshore, Guedes Soares, C. (Ed.), Taylor & Francis Group, London, UK, pp. 855-863

 • Ventura, M., Soares, L., Guedes Soares, C. and Oliveira, A. (2015), “Detection and context-driven reaction to production process anomalies in shipyards”, Maritime Technology and Engineering, Guedes Soares, C. & Santos T.A. (Eds.), Taylor & Francis Group, London, UK, pp. 385-398

 • Gordo, J.M. and Guedes Soares, C. (2015), “Experimental analysis of a box girder with double span subject to pure bending moment”, Maritime Technology and Engineering, Guedes Soares, C. & Santos T.A. (Eds.), Taylor & Francis Group, London, UK, pp. 399-405

 • Tekgoz, M., Garbatov, Y. and Guedes Soares, C. (2015), “Ultimate strength assessment of a container ship accounting for the effect of neutral axis movement”, Maritime Technology and Engineering, Guedes Soares, C. & Santos T.A. (Eds.), Taylor & Francis Group, London, UK, pp. 417-424

 • Liu, B. and Guedes Soares, C. (2015), “Experimental and numerical study on response of rectangular tubes subjected to transverse impact loadings”, Maritime Technology and Engineering, Guedes Soares, C. & Santos T.A. (Eds.), Taylor & Francis Group, London, UK, pp. 455-462

 • Shi, X., Zhang. J., Teixeira, A.P. and Guedes Soares, C. (2015), “Ultimate strength of a stiffened plate with initial imperfections under complex loading”, Maritime Technology and Engineering, Guedes Soares, C. & Santos T.A. (Eds.), Taylor & Francis Group, London, UK, pp. 485-494

 • Hashemzadeh, M., Garbatov, Y. and Guedes Soares, C. (2015) , “Analysis of butt-weld induced distortion accounting for the welding sequences and weld toe geometry”, Maritime Technology and Engineering, Guedes Soares, C. & Santos T.A. (Eds.), Taylor & Francis Group, London, UK, pp. 523-532

 • Tekgoz, M., Garbatov, Y. and Guedes Soares, C. (2015), “Strength assessment of a stiffened panel based on the modified stress curve approach”, Maritime Technology and Engineering, Guedes Soares, C. & Santos T.A. (Eds.), Taylor & Francis Group, London, UK, pp. 503-512

 • Chen, B.Q. and Guedes Soares, C. (2015), “Study on ultimate strength of ship plates with calculated weld-induced residual stress”, Maritime Technology and Engineering, Guedes Soares, C. & Santos T.A. (Eds.), Taylor & Francis Group, London, UK, pp. 513-522

 • Hashemzadeh, M., Garbatov, Y. e Guedes Soares, C. (2015), “Numerical investigation of the thermal fields due to the welding sequences of butt-welds”, Maritime Technology and Engineering, Guedes Soares, C. & Santos T.A. (Eds.), Taylor & Francis Group, London, UK, pp. 533-542

 • Saad-Eldeen, S., Garbatov, Y. and Guedes Soares, C. (2015), “Compressive strength assessment of rectangular steel plates with a local dent or an opening”, Maritime Technology and Engineering, Guedes Soares, C. & Santos T.A. (Eds.), Taylor & Francis Group, London, UK, pp. 543-552

 • Saad-Eldeen, S., Garbatov, Y. and Guedes Soares, C. (2015), “Strength assessment of wash plates subjected to combined lateral and axial loading”, Maritime Technology and Engineering, Guedes Soares, C. & Santos T.A. (Eds.), Taylor & Francis Group, London, UK, pp. 553-564

 • Yeter, B., Garbatov, Y. and Guedes Soares, C. (2015), “Fatigue crack growth analysis of a plate accounting for retardation effect”, Maritime Technology and Engineering, Guedes Soares, C. & Santos T.A. (Eds.), Taylor & Francis Group, London, UK, pp. 585-594

 • Castilho, T., Sutherland, L.S. and Guedes Soares, C. (2015), “Impact resistance of marine sandwich composites”, Maritime Technology and Engineering, Guedes Soares, C. & Santos T.A. (Eds.), Taylor & Francis Group, London, UK, pp. 607-618

 • Sutherland, L.S., Alizadeh, F. and Guedes Soares, C. (2015), “Flexural testing of sandwich laminates for steel-composite joints”, Maritime Technology and Engineering, Guedes Soares, C. & Santos T.A. (Eds.), Taylor & Francis Group, London, UK, pp. 637-646

 • Kharghani, N., Guedes Soares, C. and Milat, A. (2015), “Analysis of the stress distribution in a composite to steel joint”, Maritime Technology and Engineering, Guedes Soares, C. & Santos T.A. (Eds.), Taylor & Francis Group, London, UK, pp. 619-626

 • Tekgoz, M., Garbatov, Y. and Guedes Soares, C. (2015), “Strength analysis of ship shaped structures subjected to asymmetrical bending moment”, Analysis and Design of Marine Structures, Guedes Soares, C. & Shenoi R.A. (Eds.), Taylor & Francis, London, UK, pp. 415-423

 • Saad-Eldeen, S., Garbatov, Y. and Guedes Soares, C. (2015), “Structural capacity of an aging box girder accounting for the presence of a dent”, Analysis and Design of Marine Structures, Guedes Soares, C. & Shenoi R.A. (Eds.), Taylor & Francis, London, UK, pp. 403-414

 • Saad-Eldeen, S., Garbatov, Y. e Guedes Soares, C. (2015), “Residual strength of a severely damaged box-girder with non-uniform and inter-crystalline corrosion”, Analysis and Design of Marine Structures, Guedes Soares, C. & Shenoi R.A. (Eds.), Taylor & Francis, London, UK, pp. 521-531

 • Hashemzadeh, M., Garbatov, Y. and Guedes Soares, C. (2015), “Reduction in weld induced distortions of butt welded plates subjected to preventive measures”, Analysis and Design of Marine Structures, Guedes Soares, C. & Shenoi R.A. (Eds.), Taylor & Francis, London, UK, pp. 581-588

 • Liu, B., Garbatov, Y. and Guedes Soares, C. (2015), “Non-linear finite element analysis of crashworthy shields of offshore wind turbine supporting structures”, Analysis and Design of Marine Structures, Guedes Soares, C. & Shenoi R.A. (Eds.), Taylor & Francis, London, UK, pp. 693-702

 • Yoshikawa, T., Bayatfar, A., Kim, B.J., Chen, C.P., Wang, D., Boulares, J., Gordo, J.M., Josefson, L., Smith, M., Kading, P., Jensen, P., Ojeda, R., Benson, S., Vhanmane, S., Zhang, S. and Jiang, X. (2015), “Ultimate Strength”, Proceedings of the 19th International Ship and Offshore Structures Congress (ISSC 2015), C. Guedes Soares & Y. Garbatov (Eds.), 2015, Elsevier, pp. 279-349

 • Colette, M., Bronsart, R., Chen, Y., Erikstad, S.O., Georgiev, P., Giuglea, V., Jeong, H.K., Lazakis, I., Moro, L., Sekulski, Z., Sicchiero, M., Toyoda, M., Ventura, M. and Zanic, V. (2015), “Design Methods”, 19th International Ship and Offshore Structures Congress (ISSC 2015), Methods”, C. Guedes Soares & Y. Garbatov, (Eds.), Elsevier, pp. 459-518

 • Saad-Eldeen, S., Garbatov, Y. and Guedes Soares, C. (2016), “Emergency repair of a single hull structure with locked cracks”, Maritime Technology and Engineering 3, Guedes Soares, C. & Santos T. A., (Eds.), Taylor & Francis Group, London, UK, pp. 521-529

 • Alizadeh, F., Liu, B. and Guedes Soares, C. (2016), “Experimental and numerical response and failure of laterally impacted composite circular plates”, Maritime Technology and Engineering 3, Guedes Soares, C. & Santos T. A., (Eds.), Taylor & Francis Group, London, UK, pp. 421-428

 • Sutherland, L.S. and Guedes Soares, C. (2016) , “Investigating T-joint strength parameters using statistical experimental design and analysis techniques” , Maritime Technology and Engineering 3, Guedes Soares, C. & Santos T. A., (Eds.), Taylor & Francis Group, London, UK, pp. 569-574

 • Yeter, B., Garbatov, Y. and Guedes Soares, C. (2016), “Modular jacket offshore wind turbine support structure for the Northern Portuguese coastal zone”, Progress in Renewable Energies Offshore, Guedes Soares, C., (Ed.), Taylor & Francis Group, London, UK, pp. 655-663

 • Sousa, S. and Garbatov, Y. (2016), “Coating breakdown assessment of steel plates in marine structures subjected to compressive load”, Maritime Technology and Engineering 3, Guedes Soares, C. & Santos T. A., (Eds.), Taylor & Francis Group, London, UK, pp. 557-568

 • Saad-Eldeen, S., Garbatov, Y. and Guedes Soares, C. (2016), “Emergency repair of a single hull structure with locked cracks”, Maritime Technology and Engineering 3, Guedes Soares, C. & Santos T. A., (Eds.), Taylor & Francis Group, London, UK, pp. 521-529

 • Sousa, S. and Garbatov, Y. (2016), “Coating breakdown assessment of steel plates in marine structures subjected to compressive load”, Maritime Technology and Engineering 3, Guedes Soares, C. & Santos T. A., (Eds.), Taylor & Francis Group, London, UK, pp. 557-568

 • Shi, X., Jiang, XL., Zhang, J. and Guedes Soares, C. (2016), “Residual ultimate strength of stiffened panels with pitting corrosion under compression”, Maritime Technology and Engineering 3, Guedes Soares, C. & Santos T. A., (Eds.), Taylor & Francis Group, London, UK, pp. 547-556

 • Soares de Melo, D. e Garbatov, Y. (2016), “Yacht mast and rigging system software for design and analysis”, Maritime Technology and Engineering 3, Guedes Soares, C. & Santos T. A., (Eds.), Taylor & Francis Group, London, UK, pp. 683-691

 • Sutherland, L.S. and Guedes Soares, C. (2016), “Investigating T-joint strength parameters using statistical experimental design and analysis techniques”, Maritime Technology and Engineering 3, Guedes Soares, C. & Santos T. A., (Eds.), Taylor & Francis Group, London, UK, pp. 569-574

 • Tadros, M., Ventura, M. and Guedes Soares, C. (2016), “Assessment of the performance and the exhaust emissions of a marine diesel engine for different start angles of combustion”, Maritime Technology and Engineering 3, Guedes Soares, C. & Santos T. A., (Eds.), Taylor & Francis Group, London, UK, pp. 769-775

 • Uzunoglu, E. and Guedes Soares, C. (2016), “A numerical model for compartment assessment of offshore structures with cylindrical hulls”, Maritime Technology and Engineering 3, Guedes Soares, C. & Santos T. A., (Eds.), Taylor & Francis Group, London, UK, pp. 693-700

 • Yeter, B., Garbatov, Y. and Guedes Soares, C. (2016), “Structural design of an adaptable jacket offshore wind turbine support structure for deeper waters”, Maritime Technology and Engineering 3, Guedes Soares, C. & Santos T. A., (Eds.), Taylor & Francis Group, London, UK, pp. 583-594

 • Guedes Soares, C. (2016), “Review of experimental and numerical work on weld induced distortions and residual stresses” , Vassilios Papazoglou - Honorary Volume, S.A. Mavrakos, D. Pantelis N. Tsouvalis, (Eds.), pp. 377-386

 • Dong, Y., Garbatov, Y. and Guedes Soares, C. (2016), “Fatigue analysis and optimization of non-load-carrying fillet welded joints based on the effective notch stress approach”, Maritime Technology and Engineering 3, Guedes Soares, C. & Santos T. A., (Eds.), Taylor & Francis Group, London, UK, pp. 443-449

 • Alizadeh, F., Liu, B. and Guedes Soares, C. (2016), “Experimental and numerical response and failure of laterally impacted composite circular plates”, Maritime Technology and Engineering 3, Guedes Soares, C. & Santos T. A., (Eds.), Taylor & Francis Group, London, UK, pp. 421-428

 • Alizadeh, F., Sutherland, L.S. and Guedes Soares, C. (2016), “Effect of vacuum bag pressure on the flexural properties of GFRP composite laminates”, Maritime Technology and Engineering 3, Guedes Soares, C. & Santos T. A., (Eds.), Taylor & Francis Group, London, UK, pp. 429-434

 • Jafaryeganeh, H., Teixeira, A.P. and Guedes Soares, C. (2016), “Uncertainty on the bending moment transfer functions derived by a three-dimensional linear panel method”, Maritime Technology and Engineering 3, Guedes Soares, C. & Santos T. A., (Eds.), Taylor & Francis Group, London, UK, pp. 295-302

 • Gaspar, B., Teixeira, A.P. and Guedes Soares, C. (2016), “Sensitivity analysis of the IACS-CSR buckling strength requirements for stiffened panels”, Maritime Technology and Engineering 3, Guedes Soares, C. & Santos T. A., (Eds.), Taylor & Francis Group, London, UK, pp. 459-470

 • Gaspar, B., Bahmyari, E., Khedmati, M.R. and Guedes Soares, C. (2016), “Application of polynomial chaos expansions in stochastic analysis of plate elements under lateral pressure”, Maritime Technology and Engineering 3, Guedes Soares, C. & Santos T. A., (Eds.), Taylor & Francis Group, London, UK, pp. 471-480

 • Hashemzadeh, M., Garbatov, Y. and Guedes Soares, C. (2016), “Reduction in welding induced residual stresses and distortions of butt welded plates subjected to heat treatments”, Maritime Technology and Engineering 3, Guedes Soares, C. & Santos T. A., (Eds.), Taylor & Francis Group, London, UK, pp. 481-488

 • Saad-Eldeen, S., Garbatov, Y. and Guedes Soares, C. (2016), “Ultimate bending moment capacity of a single hull structure with large openings in side shell”, Maritime Technology and Engineering 3, Guedes Soares, C. & Santos T. A., (Eds.), Taylor & Francis Group, London, UK, pp. 531-538

 • Jafaryeganeh, H., Ventura, M. and Guedes Soares, C. (2016), “Parametric modelling for adaptive internal compartment design of container ships”, Maritime Technology and Engineering 3, Guedes Soares, C. & Santos T. A., (Eds.), Taylor & Francis Group, London, UK, pp. 655-661

 • Kharghani, N. and Guedes Soares, C. (2016), “Effect of uncertainty in the geometry and material properties on the post-buckling behavior of a composite laminate”, Maritime Technology and Engineering 3, Guedes Soares, C. & Santos T. A., (Eds.), Taylor & Francis Group, London, UK, pp. 497-503

 • Liu, B., Ottazzi, A. and Guedes Soares, C. (2016), “Plastic deformation and failure of thin steel plates subjected to spherical and cylindrical indenters”, Maritime Technology and Engineering 3, Guedes Soares, C. & Santos T. A., (Eds.), Taylor & Francis Group, London, UK, pp. 505-512

 • Liu, K., Liu, B., Wang, Z. and Guedes Soares, C. (2016), “Experimental and numerical analysis of a laterally impacted square steel plate”, Maritime Technology and Engineering 3, Guedes Soares, C. & Santos T. A., (Eds.), Taylor & Francis Group, London, UK, pp. 513-520

 • Hashemzadeh, M., Garbatov, Y. and Guedes Soares, C. (2017), “Distortion and residual stress analysis of thin butt welded plates accounting for manufacturing imperfections”, Progress in the Analysis and Design of Marine Structures, Guedes Soares, C. & Garbatov Y. (Eds.), Taylor & Francis Group, London, UK, pp. 623-630

 • Kharghani, N., Garbatov, Y. and Guedes Soares, C. (2017), “Hotspot stress analysis of a composite T-joint accounting for geometric and surface roughness effects”, Progress in the Analysis and Design of Marine Structures, Guedes Soares, C. & Garbatov Y. (Eds.), Taylor & Francis Group, London, UK, pp. 849-858

 • Li, S. S. and Guedes Soares, C. (2017), “A procedure to generate design load-time histories for fatigue strength assessment of offshore structures”, Progress in the Analysis and Design of Marine Structures, Guedes Soares, C. & Garbatov Y. (Eds.), Taylor & Francis Group, London, UK, pp. 13-20

 • Lillemae-Avi, I., Remes, H., Dong, Y., Garbatov, Y., Quemener, Y., Eggert, L., Sheng, Q. and Yue, J. (2017), “Benchmark study on considering welding-induced distortion in structural stress analysis of thin-plate structures”, Progress in the Analysis and Design of Marine Structures, Guedes Soares, C. & Garbatov Y. (Eds.), Taylor & Francis Group, London, UK, pp. 387-394

 • Patel, SD. and Guedes Soares, C. (2017), “Probability of failure of composite beams under high velocity impact”, Progress in the Analysis and Design of Marine Structures, Guedes Soares, C. & Garbatov Y. (Eds.), Taylor & Francis Group, London, UK, pp. 487-495

 • Saad-Eldeen, S., Garbatov, Y. and Guedes Soares, C. (2017), “FE model calibration and validation of a tested plate with an opening under compressive load”, PProgress in the Analysis and Design of Marine Structures, Guedes Soares, C. & Garbatov Y. (Eds.), Taylor & Francis Group, London, UK, pp. 305-312

 • Saad-Eldeen, S., Garbatov, Y. and Guedes Soares, C. (2017), “Strength enhancement of cracked swash bulkheads of jack-up spud-can”, Progress in the Analysis and Design of Marine Structures, Guedes Soares, C. & Garbatov Y. (Eds.), Taylor & Francis Group, London, UK, pp. 763-769

 • Shi, X.H., Wang, PX. and Guedes Soares, C. (2017), “Dynamic response of ship side structure to the collision with ice sheets”, Progress in the Analysis and Design of Marine Structures, Guedes Soares, C. & Garbatov Y. (Eds.), Taylor & Francis Group, London, UK, pp. 713-720

 • Farajkhah, V. and Guedes Soares, C. (2017), “Finite element study on the ultimate strength of aluminum plates joined by friction stir welding”, Progress in the Analysis and Design of Marine Structures, Guedes Soares, C. & Garbatov Y. (Eds.), Taylor & Francis Group, London, UK, pp. 609-615

 • Alizadeh, F., Garbatov, Y. and Guedes Soares, C. (2017), “Numerical investigation of pre-damaged composite plates subjected to compressive uniaxial load”, Progress in the Analysis and Design of Marine Structures, Guedes Soares, C. & Garbatov Y. (Eds.), Taylor & Francis Group, London, UK, pp. 841-848

 • Alizadeh, F. and Guedes Soares, C. (2017) , “Numerical analysis of mixed-mode fracture toughness of glass/vinylester composite laminates”, Progress in the Analysis and Design of Marine Structures, Guedes Soares, C. & Garbatov Y. (Eds.), Taylor & Francis Group, London, UK, pp. 329-335

 • Dong, Y. and Guedes Soares, C. (2017) , “Uncertainty analyses of local strain and fatigue crack initiation life of welded joints under plane strain condition”, Progress in the Analysis and Design of Marine Structures, Guedes Soares, C. & Garbatov Y. (Eds.), Taylor & Francis Group, London, UK, pp. 349-359

 • Alizadeh, F., Garbatov, Y. and Guedes Soares, C. (2017), “Numerical investigation of pre-damaged composite plates subjected to compressive uniaxial load”, Progress in the Analysis and Design of Marine Structures, Guedes Soares, C. & Garbatov Y. (Eds.), Taylor & Francis Group, London, UK, pp. 841-848

 • Zhang, X., AN, C., Duan, MG. and Guedes Soares, C. (2017), “Lateral buckling and post-buckling response based on a modified nonlinear pipe-soil interaction model”, Progress in the Analysis and Design of Marine Structures, Guedes Soares, C. & Garbatov Y. (Eds.), Taylor & Francis Group, London, UK, pp. 827-837

 • Alizadeh, F. and Guedes Soares, C. (2017), “Numerical analysis of mixed-mode fracture toughness of glass/vinylester composite laminates”, Progress in the Analysis and Design of Marine Structures, Guedes Soares, C. & Garbatov Y. (Eds.), Taylor & Francis Group, London, UK, pp. 329-335

 • Barbosa, A.A., Teixeira, A.P. and Guedes Soares, C. (2017), “Strength analysis of corroded pipelines subjected to internal pressure and bending moment”, Progress in the Analysis and Design of Marine Structures, Guedes Soares, C. & Garbatov Y. (Eds.), Taylor & Francis Group, London, UK, pp. 803-811

 • Chen, B.Q. and Guedes Soares, C. (2017), “Numerical investigation on a side-shell structure subjected to collision impact load”, Progress in the Analysis and Design of Marine Structures, Guedes Soares, C. & Garbatov Y. (Eds.), Taylor & Francis Group, London, UK, pp. 423-429

 • Damyanliev, T., Georgiev, P. and Garbatov, Y. (2017), “Conceptual ship design framework for designing new commercial ships”, Progress in the Analysis and Design of Marine Structures, Guedes Soares, C. & Garbatov Y. (Eds.), Taylor & Francis Group, London, UK, pp. 183-191

 • Dong, Y., Garbatov, Y., and Guedes Soares, C. (2017), “Fatigue strength assessment of an annealed butt welded joint accounting for material inhomogeneity”, Progress in the Analysis and Design of Marine Structures, Guedes Soares, C. & Garbatov Y. (Eds.), Taylor & Francis Group, London, UK, pp. 337-347

 • Dong, Y. and Guedes Soares, C. (2017), “Uncertainty analyses of local strain and fatigue crack initiation life of welded joints under plane strain condition”, Progress in the Analysis and Design of Marine Structures, Guedes Soares, C. & Garbatov Y. (Eds.), Taylor & Francis Group, London, UK, pp. 349-359

 • Garbatov, Y. and Georgiev, P. (2017), “Optimal design of stiffened plate subjected to combined stochastic loads”, Progress in the Analysis and Design of Marine Structures, Guedes Soares, C. & Garbatov Y. (Eds.), Taylor & Francis Group, London, UK, pp. 243-252

 • Farajkhah, V. and Guedes Soares, C. (2017), “Finite element study on the ultimate strength of aluminum plates joined by friction stir welding”, Progress in the Analysis and Design of Marine Structures, Guedes Soares, C. & Garbatov Y. (Eds.), Taylor & Francis Group, London, UK, pp. 609-615

 • Gordo, J. M. (2017), “Compressive strength of double-bottom under alternate hold loading condition”, Progress in the Analysis and Design of Marine Structures, Guedes Soares, C. & Garbatov Y. (Eds.), Taylor & Francis Group, London, UK, pp. 253-261

 • Bharadwaj, U.R., Koch, T., Frank, D., Herrera, L., Randall, G., Volbeda, C., Garbatov, Y., Hirdaris, S., Tsouvalis, N., Carneros, A., Zhou, P. and Atanasova, I. (2017), “Ship Lifecycle Software Solutions (SHIPLYS) - an overview of the project, its first phase of development and challenges”, Maritime Transportation and Harvesting of Sea Resources, Guedes Soares, C. & Teixeira A.P. (Eds.), Taylor & Francis Group, London, UK, pp. 889-896

 • Garbatov, Y., Ventura, M., Guedes Soares, C., Georgiev, P., Koch, T. and Atanasova, I. (2018), “Framework for conceptual ship design accounting for risk-based life cycle assessment”, Maritime Transportation and Harvesting of Sea Resources, Guedes Soares, C. & Teixeira A.P. (Eds.), Taylor & Francis Group, London, UK, pp. 921-930

 • Zeng, Y., Zhang, J.F., Teixeira, A.P. and Guedes Soares, C. (2018), “Role assignment and conflict identification for the encounter ships under COLREGs”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor and Francis, London, UK, pp. 137-146

 • Bharadwaj, U.R., Koch, T., Frank, D., Herrera, L., Randall, G., Volbeda, C., Garbatov, Y., Hirdaris, S., Tsouvalis, N., Carneros, A., Zhou, P. and Atanasova, I. (2018), “Ship Lifecycle Software Solutions (SHIPLYS) - an overview of the project, its first phase of development and challenges”, Maritime Transportation and Harvesting of Sea Resources, Guedes Soares, C. & Teixeira A.P. (Eds.), Taylor & Francis Group, London, UK, pp. 889-896

 • Oliveira, A. and Gordo, J.M. (2018), “Cutting processes in shipbuilding - a case study”, Maritime Transportation and Harvesting of Sea Resources, Guedes Soares, C. & Teixeira A.P. (Eds.), Taylor & Francis Group, London, UK, pp. 757-762

 • Yeter, B., Garbatov, Y. and Guedes Soares, C. (2018), “Probabilistic life-cycle assessment for offshore wind turbines”, Maritime Transportation and Harvesting of Sea Resources, Guedes Soares, C. & Teixeira A.P. (Eds.), Taylor & Francis Group, London, UK, pp. 1229-1237

 • Denev, Y., Georgiev, P. and Garbatov, Y. (2018), “Analysis of multipurpose ship performance accounting for SME shipyard building limitations”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor & Francis Group, London, UK, pp. 165-174

 • Denev, Y., Georgiev, P. and Garbatov, Y. (2018) , “Analysis of multipurpose ship performance accounting for SME shipyard building limitations”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor & Francis Group, London, UK, pp. 165-174

 • Tadros, M., Ventura, M. and Guedes Soares, C. (2018), “Optimization scheme for the selection of the propeller in ship concept design”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor & Francis Group, London, UK, pp. 233-240

 • Sisci, F. and Ventura, M. (2018), “Tool for initial hull structure dimensioning at ship concept”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor & Francis Group, London, UK, pp. 309-316

 • Sisci, F. and Ventura, M. (2018), “Tool for initial hull structure dimensioning at ship concept”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor & Francis Group, London, UK, pp. 309-316

 • Damyanliev, T., Georgiev, P., Atanasova, I. and Garbatov, Y. (2018), “Conceptual design of multipurpose ship and fleet accounting for SME shipyard building limitations”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor & Francis Group, London, UK, pp. 317-326

 • Yue, JX., Dong, Y. and Guedes Soares, C. (2018), “An Experimental-Finite Element Method Based on Beach Marks to Determine Fatigue Crack Growth Rate in Thick Plates with Varying Stress States, Engineering Fracture Mechanics, Vol. 196, pp. 123-141

 • Oliveira, A. and Gordo, J.M. (2018), “Cutting processes in shipbuilding - a case study”, Maritime Transportation and Harvesting of Sea Resources, Guedes Soares, C. & Teixeira A.P. (Eds.), Taylor & Francis Group, London, UK, pp. 757-762

 • Oliveira, A. and Gordo, J. M. (2018), “Implementation of new production processes in panel's line”, Maritime Transportation and Harvesting of Sea Resources, Guedes Soares, C. & Teixeira A.P. (Eds.), Taylor & Francis Group, London, UK, pp. 763-773

 • Rörup, J., Garbatov, Y., Dong, Y., Uzunoglu, E., Parmentier, G., Andoniu, A., Quemener, Y., Chen, K-C., Vhanmane, S., Negi, A., Parihar, Y., Villavicencio, R., Parsoya, V., Peng, L. and Yue, J. (2018), “Round robin study on spectral fatigue assessment of butt-welded joints”, Maritime Transportation and Harvesting of Sea Resources, Guedes Soares, C. & Teixeira A.P. (Eds.), Taylor & Francis Group, London, UK, pp. 663-670

 • Tadros, M., Ventura, M. and Guedes Soares, C. (2018), “Surrogate models of the performance and exhaust emissions of marine diesel engines for ship conceptual design", Maritime Transportation and Harvesting of Sea Resources, Guedes Soares, C. & Teixeira A.P. (Eds.), Taylor & Francis Group, London, UK, pp. 105-112

 • Yeter, B., Garbatov, Y. and Guedes Soares, C. (2018), “Probabilistic life-cycle assessment for offshore wind turbines”, Maritime Transportation and Harvesting of Sea Resources, Guedes Soares, C. & Teixeira A.P. (Eds.), Taylor & Francis Group, London, UK, pp. 1229-1237

 • Bharadwaj, U.R., Koch, T., Frank, D., Herrera, L., Randall, G., Volbeda, C., Garbatov, Y., Hirdaris, S., Tsouvalis, N., Carneros, A., Zhou, P. and Atanasova, I. (2018), “Ship Lifecycle Software Solutions (SHIPLYS) - an overview of the project, its first phase of development and challenges”, Maritime Transportation and Harvesting of Sea Resources, Guedes Soares, C. & Teixeira A.P. (Eds.), Taylor & Francis Group, London, UK, pp. 889-896

 • Garbatov, Y., Ventura, M., Georgiev, P., Damyanliev, T. and Atanasova, I. (2018), “Investment cost estimate accounting for shipbuilding constraints”, Maritime Transportation and Harvesting of Sea Resources, Guedes Soares, C. & Teixeira A.P. (Eds.), Taylor & Francis Group, London, UK, pp. 913-920

 • Garbatov, Y., Ventura, M., Guedes Soares, C., Georgiev, P., Koch, T. and Atanasova, I. (2018), “Framework for conceptual ship design accounting for risk-based life cycle assessment”, Maritime Transportation and Harvesting of Sea Resources, Guedes Soares, C. & Teixeira A.P. (Eds.), Taylor & Francis Group, London, UK, pp. 921-930

 • Gordo, J.M. and Leal, M.A. (2018), “A tool for analysis of costs on the manufacturing of the hull”, Maritime Transportation and Harvesting of Sea Resources, Guedes Soares, C. & Teixeira A.P. (Eds.), Taylor & Francis Group, London, UK, pp. 743-748

 • Hashemzadeh, M., Garbatov, Y. and Guedes Soares, C. (2018), “Assessment of distortion and residual stresses in butt welded plates made of different steels”, Maritime Transportation and Harvesting of Sea Resources, Guedes Soares, C. & Teixeira A.P. (Eds.), Taylor & Francis Group, London, UK, pp. 617-623

 • Jafaryeganeh, H. and Guedes Soares, C. (2018), “Comparison of two approaches for prediction of wave induced loads in damaged ships”, Maritime Transportation and Harvesting of Sea Resources, Guedes Soares, C. & Teixeira A.P. (Eds.), Taylor & Francis Group, London, UK, pp. 473-481

 • Jafaryeganeh, H. and Guedes Soares, C. (2018), “Comparison of two approaches for prediction of wave induced loads in damaged ships”, Maritime Transportation and Harvesting of Sea Resources, Guedes Soares, C. & Teixeira A.P. (Eds.), Taylor & Francis Group, London, UK, pp. 473-481

 • Jafaryeganeh, H., Ventura, M. and Guedes Soares, C. (2018), “Parametric modelling of tanker internal compartment layout for survivability improvement within the framework of regulations”, Maritime Transportation and Harvesting of Sea Resources, Guedes Soares, C. & Teixeira A.P. (Eds.), Taylor & Francis Group, London, UK, pp. 23-30

 • Garbatov, Y., As, S.K., Branner, K., Choi, B.K., Den Besten, J.H., Dong, P., Lillemae, I., Lindstrom, P., Lourenço de Souza, M., Parmentier, G., Quemener, Y., Rizzo, C.M., Rorup, J., Vhanmane, S., Villavicencio, R., Wang, F. and Yue, J. (2018), “Committee III.2 - Fatigue and Fracture”, 20th International Ship and Offshore Structures Congress (ISSC 2018), Kaminski, M. & Rigo P. (Eds.), IOS Press Ebooks, pp. Vol 1 - 441-547 and Vol 3 - 85-108

 • Garbatov, Y., As, S.K., Branner, K., Choi, B.K., Den Besten, J.H., Dong, P., Lillemae, I., Lindstrom, P., Lourenço de Souza, M., Parmentier, G., Quemener, Y., Rizzo, C.M., Rorup, J., Vhanmane, S., Villavicencio, R., Wang, F. and Yue, J. (2018), “Committee III.2 - Fatigue and Fracture”, 20th International Ship and Offshore Structures Congress (ISSC 2018), Kaminski, M. & Rigo P. (Eds.), IOS Press Ebooks, pp. Vol 1 - 441-547 and Vol 3 - 85-108

 • Lazakis, I., Bronsart, R., Caparace, J-D., Chen, Y., Georgiev, P., Ilnitskiy, I., Moro, L., Prebeg, P., Mendonça Santos, J., Sekulski, Z., Sicchiero, M., Sielski, R., Tang, W., Toyoda, M. and Varela, J. (2018), “Committee IV.2 - Design Methods”, 20th International Ship and Offshore Structures Congress (ISSC 2018), Kaminski, M. & Rigo P. (Eds.), IOS Press Ebooks, pp. Vol 1 - 609-708 and Vol 3 - 131-158

 • Lazakis, I., Bronsart, R., Caparace, J-D., Chen, Y., Georgiev, P., Ilnitskiy, I., Moro, L., Prebeg, P., Mendonça Santos, J., Sekulski, Z., Sicchiero, M., Sielski, R., Tang, W., Toyoda, M. and Varela, J. (2018), “Committee IV.2 - Design Methods”, 20th International Ship and Offshore Structures Congress (ISSC 2018), Kaminski, M. & Rigo P. (Eds.), IOS Press Ebooks, pp. Vol 1 - 609-708 and Vol 3 - 131-158

 • Truelock, D., Czaban, Z., Luo, H., Wang, X., Holtmann, M., Begovic, E., Yasuda, A., Ventura, M., Nicholls-Ee, R., Oterkus, E. and Sensharma, P. (2018), “Committee V.5 - Special Craft”, 20th International Ship and Offshore Structures Congress (ISSC 2018), Kaminski, M. & Rigo P. (Eds.), IOS Press Ebooks, pp. Vol 2 - 279-345 and Vol 3 - 231-245

 • Truelock, D., Czaban, Z., Luo, H., Wang, X., Holtmann, M., Begovic, E., Yasuda, A., Ventura, M., Nicholls-Ee, R., Oterkus, E. and Sensharma, P. (2018), “Committee V.5 - Special Craft”, 20th International Ship and Offshore Structures Congress (ISSC 2018), Kaminski, M. & Rigo P. (Eds.), IOS Press Ebooks, pp. Vol 2 - 279-345 and Vol 3 - 231-245

 • Tekgoz, M., Garbatov, Y. and Guedes Soares, C. (2018), “Residual strength assessment of a grounded container ship subjected to asymmetrical bending loads”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor & Francis Group, London, UK, pp. 337-344

 • Saad-Eldeen, S., Garbatov, Y. and Guedes Soares, C. (2018), “Failure assessment of wash plates with different degree of openings”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor & Francis Group, London, UK, pp. 377-386

 • Yeter, B., Garbatov, Y. and Guedes Soares, C. (2018), “Failure assessment of transition piece of jacket offshore wind turbine”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor & Francis Group, London, UK, pp. 359-368

 • Nascimento, F., Sutherland, L.S. and Garbatov, Y. (2018), “Experimental and numerical structural analysis of a windsurf fin”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor & Francis Group, London, UK, pp. 387-394

 • Nascimento, F., Sutherland, L.S. and Garbatov, Y. (2018), “Experimental and numerical structural analysis of a windsurf fin”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor & Francis Group, London, UK, pp. 387-394

 • Calvário, M., Teixeira, A.P. and Guedes Soares, C. (2018), “Uncentainty propagation and sensitivity analysis of a laminated composite beam”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor & Francis Group, London, UK, pp. 395-402

 • Calvário, M., Teixeira, A.P. and Guedes Soares, C. (2018), “Uncentainty propagation and sensitivity analysis of a laminated composite beam”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor & Francis Group, London, UK, pp. 395-402

 • Kharghani, N. and Guedes Soares, C. (2018), “Experimental study of the residual strength of damaged hybrid steel-FRP balcony overhangs of ships”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor & Francis Group, London, UK, pp. 403-412

 • Oliveira, A. and Gordo, J.M. (2018), “Model to forecast times and costs of cutting, assembling and welding stages of construction of ship blocks”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor & Francis Group, London, UK, pp. 413-420

 • Atanasova, I., Damyanliev, T., Georgiev, P. and Garbatov, Y. (2018), “Analysis of SME ship repair yard capacity in building new ships”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor & Francis Group, London, UK, pp. 431-438

 • Raed, K., Teixeira, A.P. and Guedes Soares, C. (2019), “Assessment of long-term extreme response of a floating support structure using the environmental contour method”, Advances in Renewable Energies Offshore, Guedes Soares, C., (Ed.), Taylor & Francis, London, UK, pp. 685-692

 • Almany, N., Tekgoz, M. and Garbatov, Y. (2019), “Design of an offshore multipurpose support vessel” , Advances in Renewable Energies Offshore, Guedes Soares, C., (Ed.), Taylor & Francis, London, UK, pp. 905-914

 • Lin, Z., Zhu, L., Liu, JH. and Guedes Soares, C. (2019), “Progressive collapse analyses of a stiffened box-girder under pure bending”, Trends in Analysis and Design of Marine Structures, Parunov, J. & Guedes Soares C. (Eds.), Taylor & Francis, London, UK, pp. 158-164

 • Lin, Z., Zhu, L., Liu, JH. and Guedes Soares, C. (2019), “Progressive collapse analyses of a stiffened box-girder under pure bending”, Trends in Analysis and Design of Marine Structures, Parunov, J. & Guedes Soares C. (Eds.), Taylor & Francis, London, UK, pp. 158-164

 • Kharghani, N. and Guedes Soares, C. (2019), “Flexural Behaviour Prediction of a Conventional Composite-to-Steel Butt-Joint of Ships Using Layerwise HSDT”, Trends in Analysis and Design of Marine Structures, Parunov, J. & Guedes Soares C. (Eds.), Taylor & Francis, London, UK, pp. 369-375

 • Rothbarth, G.V.W. and Pinto, R.A.Q. (2019), “Fibreglass repair behaviour as a function of the scarf angle”, Trends in Analysis and Design of Marine Structures, Parunov, J. & Guedes Soares C. (Eds.), Taylor & Francis, London, UK, pp. 385-390

 • Almany, N., Tekgoz, M. and Garbatov, Y. (2019), “Design of an offshore multipurpose support vessel”, Advances in Renewable Energies Offshore, Guedes Soares, C., (Ed.), Taylor & Francis, London, UK, pp. 905-914

 • Almany, N., Tekgoz, M. and Garbatov, Y. (2019), “Design of an offshore multipurpose support vessel”, Advances in Renewable Energies Offshore, Guedes Soares, C., (Ed.), Taylor & Francis, London, UK, pp. 905-914

 • Georgiev, P., Garbatov, Y., Kirilov, L. and Denev, Y. (2020), “Multi attribute design decision solution of MPV accounting for shipyard building constraints”, Sustainable Development and Innovations in Marine Technologies, Georgiev, P. & Guedes Soares C. (Eds.), Taylor & Francis Group, London, pp. 354-361

 • Tekgoz, M., Garbatov, Y. and Guedes Soares, C. (2020), “Average stress-strain behaviour of stiffened plates of a box girder in the progressive collapse analysis”, Developments in the Collision and Grounding of Ships and Offshore Structures, C. Guedes Soares (Ed.), Taylor and Francis Group, London, pp. 144-150

 • Liu, B., Dong, A., Chen, L., Liu, K. and Guedes Soares, C. (2020), “Analysis of the resistance to penetration of aluminium-alloy plates”, Developments in the Collision and Grounding of Ships and Offshore Structures, C. Guedes Soares (Ed.), Taylor and Francis Group, London, pp. 27-33

 • Liu, B., Dong, A., Chen, L., Liu, K. and Guedes Soares, C. (2020), “Analysis of the resistance to penetration of aluminium-alloy plates”, Developments in the Collision and Grounding of Ships and Offshore Structures, C. Guedes Soares (Ed.), Taylor and Francis Group, London, pp. 27-33

 • Liu, B., Dong, A., Chen, L., Liu, K. and Guedes Soares, C. (2020), “Analysis of the resistance to penetration of aluminium-alloy plates”, Developments in the Collision and Grounding of Ships and Offshore Structures, C. Guedes Soares (Ed.), Taylor and Francis Group, London, pp. 27-33

 • Woloszyk, K. and Garbatov, Y. (2020), “FE analysis of support-specimen interaction of compressive experimental test”, Sustainable Development and Innovations in Marine Technologies, Georgiev, P. & Guedes Soares C. (Eds.), Taylor & Francis Group, London, pp. 423-428

 • Tekgoz, M., Garbatov, Y. and Guedes Soares, C. (2020), “Ultimate strength assessment of square plate subjected to uni-axial dynamic load”, Developments in the Collision and Grounding of Ships and Offshore Structures, C. Guedes Soares (Ed.), Taylor & Francis Group, London, pp. 189-196

 • Liu, B., Wang, G., Chen, L., Liao, XT. and Guedes Soares, C. (2020), “Numerical analysis of ship collisions accounting for bow and side deformation interaction”, Developments in the Collision and Grounding of Ships and Offshore Structures, C. Guedes Soares (Ed.), Taylor and Francis Group, London, pp. 57-64

 • Hashemzadeh, M., Garbatov, Y. and Guedes Soares, C. (2020), “Numerical Stress-Strain Analysis of Butt-Welded Plates during the Welding Process”, Developments in the Collision and Grounding of Ships and Offshore Structures, C. Guedes Soares (Ed.), Taylor and Francis Group, London, pp. 157-162

 • Woloszyk, K. and Garbatov, Y. (2020), “Uncertainty assessment of ultimate strength of corroded stiffened plates subjected to maintenance”, Sustainable Development and Innovations in Marine Technologies, Georgiev, P. & Guedes Soares C. (Eds.), Taylor and Francis Group, London, pp. 429-436

 • Chen, B.Q. and Guedes Soares, C. (2020), “Numerical investigation on the influence of stiffeners on the crushing resistance of web girders in ship grounding”, Developments in the Collision and Grounding of Ships and Offshore Structures, C. Guedes Soares (Ed.), Taylor and Francis Group, London, pp. 49-56

 • Xu, He, Guedes Soares, C. and Zhu, L. (2020), “Scaling the saturated impulse behaviour of strain-rate sensitive square plates”, Developments in the Collision and Grounding of Ships and Offshore Structures, C. Guedes Soares (Ed.), Taylor and Francis Group, London, pp. 171-178

 • Xu, He and Guedes Soares, C. (2020), “Experimental study on the dynamic response of a beam under repeated impacts”, Developments in the Collision and Grounding of Ships and Offshore Structures, C. Guedes Soares (Ed.), Taylor and Francis Group, London, pp. 131-138

 • Xu, He and Guedes Soares, C. (2020), “Experimental study on the dynamic response of a beam under repeated impacts”, Developments in the Collision and Grounding of Ships and Offshore Structures, C. Guedes Soares (Ed.), Taylor and Francis Group, London, pp. 131-138

 • Garbatov, Y., Ås, S.K., Branner, K., Choi, B.K., Den Besten, J.H., Dong, P., Lillemäe, I., Lindstrom, P., Lourenco de Souza, M., Parmentier, G., Quéméner, Y., Rizzo, C.M., Rörup, J., Vhanmane, S., Villavicencio, R., Wang, F. and Yue, J. (2020), Fatigue and Fracture - Reply to Official and Floor Discussers, 20th International Ship and Offshore Structures Congress (ISSC 2018), IOS Press Ebooks, pp. pp.87-110

 • Woloszyk, K. and Garbatov, Y. (2021), “Design of experiments approach for ultimate strength assessment of corroded stiffened plates”, Modern Trends in Research on Steel, Aluminium and Composite Structures, Gizejowski, M. Kozlowski A. Chybinski M. Rzeszut K. Studzinski R. & Szumigala M., (Eds.), Taylor and Francis, London, UK, pp. 527-533

 • Duan, M.G., Chai, SH., Pasqualino, I.P., Sun, L.P., Myllerup, C., Mavrakos, S., Samanta, A., Kavanagh, K., Ozaki, M., Saevik, S., Teixeira, A.P., Min Low, Y., Seo, J.K., Schreier, S., Swart, P. and Song, H. (2018), “Committee V.8 - Report for Subsea Technology”, 20th International Ship and Offshore Structures Congress (ISSC 2018), Kaminski, M. & Rigo P. (Eds.), IOS Press Ebooks, pp. Vol 2 - 461-523 and Vol 3 - 277-286



Articles in Conferences
 • Guedes Soares, C. (1979), “Rigid-Plastic Methods of Analysis of Structures subjected to Intense Dynamic Loading” (In Portuguese), Proceedings of the 2º National Congress of Theoretical and Applied Mechanics, Lisbon

 • Guedes Soares, C. and Paiva, J.A. (1987), “Stress Distribution in a Paralelipipedic Reservoir containing Liquid” (In Portuguese), Proceedings of the 4º National Congress of Theoretical and Applied Mechanics, Coimbra

 • Guedes Soares, C. and Soares, M.R.N. (1987), “Optimisation of the Primary Ship Structure” (In Portuguese), Proceedings of the 4º National Congress of Theoretical and Applied Mechanics, Coimbra

 • Teixeira, A., Kmiecik, M. and Guedes Soares, C. (1995), “Analysis of the Plastic Collapse of Beams by Finite Elements” (In Portuguese), Proceedings IV National Meeting of Computational Mechanics, Lisbon, 10-12 April, Vol. I, pp. 83-94

 • Carvalho, A. and Guedes Soares, C. (1995), “Dynamic Response of Rectangular Plates of Composite Materials Subjected to Impact Loads", Proceedings of the IV National Meeting of Computational Mechanics, Lisbon, 10-12 April 1995, Vol. I, pp. 385-398.

 • Gordo, J.M. and Guedes Soares, C. (1995), “Collapse of Ship Hulls under Combined Vertical and Horizontal Bending Moments”, Proceedings of the Sixth International Symposium on Practical Design of Ships & Mobile Units, (PRADS’95), September, Korea, Vol. II, pp. 808-819

 • Ventura, M., Cacho, A., Torrado, T. and Guedes Soares, C. (1995), ), “Computer-Aided Generation of Ship Hull Structures on Small Computers”, Proceedings of the International Symposium Computer-Aided Design & Production for Small Craft, Southampton, September, Vol. 12, pp. 1-8

 • Jensen, J.J., Caridis, P., R.-Cho, S., Damonte, R., Dow, R.S., Gordo, J.M. Kaminski, M.L., Kozliakov, V.V., Pegg, N.G., Röhr, U., Rutherford, S.E., Yao, T. and Zhang, S. (1997), “Ultimate Strength (Committee III.1)”, Proceedings of the 13th International Ship and Offshore Structures Congress (ISSC), Trondheim, Vol. 1, pp. 233-283

 • Jensen, J.J., Caridis, P., R.-Cho, S., Damonte, R., Dow, R.S., Gordo, J.M. Kaminski, M.L., Kozliakov, V.V., Pegg, N.G., Röhr, U., Rutherford, S.E., Yao, T. e Zhang, S. (1997), “Ultimate Strength (Committee III.1)”, Proceedings of the 13th International Ship and Offshore Structures Congress (ISSC), Trondheim, Vol. 1, pp. 233-283

 • Ventura, M. and Guedes Soares, C. (1998), “Hull Form Modelling Using NURBS Curves and Surfaces” (In Portuguese), Ship Design, Shipbuilding and Ship Maintenance (in Portuguese), David e Silva, F. and Rodrigues Mateus, A. (Eds.), Lisbon, pp. 14.1-14.1

 • Gordo, J.M. and Guedes Soares, C. (1998), “Considerations about the Strength of Thin-Walled Structures” (In Portuguese), Proceedings of the Seminar on Ship Design, Shipbuilding and Ship Maintenance (in Portuguese), David e Silva, F. and Rodrigues Mateus, A. (Eds.), Lisbon, pp. 7.1-7.17

 • Ventura, M. and Guedes Soares, C. (1998), “Hull Form Modelling Using NURBS Curves and Surfaces” (In Portuguese), Ship Design, Shipbuilding and Ship Maintenance, David e Silva, F. and Rodrigues Mateus, A. (Eds.), Lisbon, pp. 14.1-14.15

 • Ventura, M., Vitória, J. and Guedes Soares, C., (2000), “Implementation of STEP Translators Using the Ship Hull Product Model”, Proceedings of the 1st International EuroConference on Computer Applications and Information Technology in the Maritime Industries (COMPIT’00), Potsdam, 29 March-2 April, pp. 463-476

 • Wieland, P., Odendahl, C., Weitzenböck, E., Jaramillo, D., Makris, S., Cacho, A. and Guedes Soares, C. (2000), “Process and Data Modelling for a Maritime Virtual Enterprise”, Proceedings of the 1st International EuroConference on Computer Applications and Information Technology in the Maritime Industries (COMPIT’00), Potsdam, 29 March-2 April, pp. 323-336

 • Guedes Soares, C. (2000), “Impact Strength of Glass-Fibre Composites”, Proceedings of the International Conference on Lightweight Construction Latest Developments, London, 24-25 February, paper 11, pp 1-9

 • Gordo, J.M. and Guedes Soares, C. (2000), “Residual Strength of Damaged Ship Hulls”, Proceedings of the IX International Maritime Association of Mediterranean Congress (IMAM´00), Pasquale Cassella, Antonio Scamardella and Giuseppe Festinese (Eds.), 2-6 April, Ischia, Italy, pp. 79-86

 • 3.3.11 Kaminski, M.L., Amdahl, J., Fasano, E., Frieze, P.A., Gordo, J.M., Grundy, P., Hess, P.E, Kawamoto, Y., Kujala, P., Paik, J.K., Röhr, U. and Simonsen, B. C. (2000), “Ultimate Strength”, Proceedings of the 14th International Ship and Offshore Structures Congress (ISSC’00), 2-6 October, Nagasaki, Japan, Vol. 1, pp. 253-321

 • Guedes Soares, C. (2000), “Impact Strength of Glass-Fibre Composites”, Proceedings of the International Conference on Lightweight Construction Latest Developments, 24-25 February, London,UK, paper 11, pp 1-9

 • Gordo, J.M. and Guedes Soares, C. (2001), “Stress Distribution in Thin-Walled Reinforced Box-Girder Beams subjected to Bending” (In Portuguese), Proceedings of the III Meeting of Metal and Mixed Structures, (in Portuguese), 6-7 December, Aveiro, Portugal, pp. 543-552

 • Sutherland, L. and Guedes Soares, C. (2001), “Impact Behaviour of Low Fibre-Fraction Glass / Polyester Laminates”, Proceedings of the 4th APAET Meeting - Experimental Stress Analysis and Experimental Mechanic, 17-19 October, Bragança, Portugal, pp. 39-40

 • Garbatov, Y., Petkov, H. and Guedes Soares, C. (2001), “Fatigue Assessment of the Windows Corner Structure of Passenger Ship”, Proceedings of the III International Conference on Marine Industry (MARIND’01), 4-8 June, Varna, Bulgaria, Vol. III, pp. 95-107

 • Sutherland, L. and Guedes Soares, C. (2001), “Impact Behaviour of Low Fibre-Fraction Glass / Polyester Laminates”, Proceedings of the 4th APAET Meeting - Experimental Stress Analysis and Experimental Mechanic, 17-19 October, Bragança, Portugal, pp. 39-40

 • Gordo, J.M. and Guedes Soares, C. (2001), “Bending Test on a Thin Wall Box Girder” (In Portuguese), Proceedings of the 4th APAET Meeting - Experimental Stress Analysis and Experimental Mechanic, (in Portuguese), 17-19 October, Bragança, Portugal

 • Sousa, A., Garbatov, Y. and Guedes Soares, C. (2001), “Finite Element Analysis of a Bulk Carrier under a Fadigue Load” (In Portuguese), Proceedings of the III Meeting of Metal and Mixed Structures, 6-7 December, Aveiro, Portugal, pp. 679-692

 • Sousa, A., Garbatov, Y. e Guedes Soares, C. (2001), “Finite Element Analysis of a Bulk Carrier under a Fadigue Load” (In Portuguese), Proceedings of the III Meeting of Metal and Mixed Structures (in Portuguese), 6-7 December, Aveiro, Portugal, pp. 543-552

 • Sun, H.-H. and Guedes Soares, C. (2001), “Reliability-Based Structural Design of Ship-Type FPSO Units”, Proceedings of the 20th International Conference on Offshore Mechanics and Arctic Engineering (OMAE’01), 3-8 June, 2001, Rio de Janeiro, Brazil, ASME, New York, Paper OMAE2001-S&R-2177

 • Sun, H.-H. and Guedes Soares, C. (2001), “Reliability-Based Structural Design of Ship-Type FPSO Units”, Proceedings of the 20th International Conference on Offshore Mechanics and Arctic Engineering (OMAE’01), 3-8 June, 2001, Rio de Janeiro, Brazil, ASME, New York, Paper OMAE2001-S&R-2177

 • Garbatov, Y., Rudan, S. and Guedes Soares, C. (2002), “Assessment of Geometry Correction Functions of Tanker Knuckle Details Based on Fatigue Tests and Finite-Element Analysis”, Proceedings of the 21st International Conference on Offshore Mechanics and Arctic Engineering (OMAE’02), 23-28 June, Oslo, Norway, ASME, New York, Paper MAT-28422

 • Garbatov, Y., Rudan, S. and Guedes Soares, C. (2002), “Prediction of Fatigue Damage in Brackets of Large Scale Test Specimens of Ship Structures”, Proceedings of the 8th Portuguese Conference on Fracture, 20-22 February, Vila Real, Portugal, pp. 61-69

 • Sadovsky, Z., Teixeira, A.P. and Guedes Soares, C. (2002), “Effects of Localised Imperfections Normalised by Energy Measure on the Compression Strength of Rectangular Plates”, Proceedings of the 3rd European Conference on Steel Structures (EUROSTEEL´02), Lamas, A. and Silva, L. S. (Eds.), 19-20 September, Coimbra-Portugal, Vol. I, pp. 601-610

 • Chen, N.-Z., Garbatov, Y. and Guedes Soares, C. (2002), “Finite Element Analysis of a Fishing Vessel Built of Composite Materials”, Proceedings of the 6th International Conference on Marine Science and Technology (Black Sea´02), 10-12 October, Varna, Bulgaria

 • Rudan, S., Garbatov, Y. and Guedes Soares, C. (2002) , “Hot-Spot Stress Assessment Based on Different Sea State Conditions”, Proceedings of the 15th International Symposium on Theory and Practice of Shipbuilding (SORTA´02), 14-16 November, Trogir, Croatia, pp. 427-432

 • Ventura, M. and Guedes Soares, C. (2002), “Exchange and Sharing of Ship Product Data”, Proceedings of the WEGEMT, 11-15 November, Madrid, Spain

 • Monev, V., Santos, T.A., Ventura, M. and Guedes Soares, C. (2002), “Automatic Generation of the Geometric Definitions of Ship Subdivision for Damage Stability Optimisation”, Proceedings of the 6th International Conference on Marine Science and Technology (Black Sea´02), 10-12 October, Varna, Bulgaria

 • Varela, J.M. and Guedes Soares, C. (2002), “An Object Oriented Architecture of a Fluid Dissemination Virtual Environment in a Ship”, Proceedings of the SIM OUEST 2002, 28-29 November, Nantes, France

 • Chen, N.-Z., Garbatov, Y. and Guedes Soares, C. (2002), “Finite Element Analysis of a Fishing Vessel Built of Composite Materials, Proceedings of the 6th International Conference on Marine Science and Technology (Black Sea´02), 10-12 October, Varna, Bulgaria

 • Dimas, D.M. and Guedes Soares, C. (2003), “Modes of Collapse of a clamped beam under Transverse Impact” (In Portuguese), Proceedings of the IV Meeting of Metal and Mixed Structures, (in Portuguese), 4-5 December, Lisbon, Portugal, pp. 379-388.

 • Varela, J., Santos, T.A. and Guedes Soares, C. (2003), “Simulation of Fluid Dissemination in a Virtual Reality Environment Onboard the Ship”, Proceedings of the 2nd International Conference on Computer Applications and Information Technology in the Maritime Industries (COMPIT'03), 14-17 Maio, Hamburgo, Alemanha, pp. 432-44

 • Dimas, D.M. and Guedes Soares, C. (2003), “Experimental Study of the Plastic Behavior of Beams subjected to Impact” (In Portuguese), Proceedings of the VII Congress of Applied and Computational Mechanics, (in Portuguese), 14-16 April, Évora, Portugal, Vol. III (Secção IV), pp. 1399-1409

 • Rodrigues, B., Sutherland, L.S. and Guedes Soares, C. (2003), “Design and Commissioning of A Servo-Hydraulic Test Rig” (In Portuguese), Proceedings of the VII Congress of Applied and Computational Mechanic, 14-16 April, Évora, Portugal, III, Part IV, pp. 1631-1640

 • Dimas, D.M. and Guedes Soares, C. (2003), “Modes of Collapse of a clamped beam under Transverse Impact” (In Portuguese), Proceedings of the IV Meeting of Metal and Mixed Structures (in Portuguese), 4-5 December, Lisbon, Portugal, pp. 379-388

 • Gordo, J.M. and Guedes Soares, C. (2003), “Influence of geometry and material on the Ultimate Strength of Stiffened Panel” (In Portuguese), Proceedings of the IV Meeting of Metal and Mixed Structures (in Portuguese), 4-5 December, Lisbon, Portugal, pp. 429-439

 • Garbatov, Y., Leite, R. and Guedes Soares, C. (2003), “Assessment of fatigue damage of a welded trapezoidal joint subject to a combined stochastic load” (In Portuguese), Proceedings of the IV Meeting of Metal and Mixed Structures (in Portuguese), 4-5 December, Lisbon, Portugal, pp. 477-486

 • Tomasevic, S., Garbatov, Y. and Guedes Soares, C. (2004), “Fatigue Damage Assessment of a Converted FPSO Hull”, Proceedings of the 9th Portuguese Conference on Fracture 2004, Portuguese Materials Society, 18-20 February, Setúbal, Portugal

 • Sadovsky, Z., Guedes Soares, C. and Teixeira, A.P. (2004), “On Lower Bound Solutions of Compression Strength of Plates with Random Imperfections”, Proceedings of the 4th International Conference on Thin-Walled Structures (ICTWS´04), 22-24 Junho, Loughborough, UK, Loughlan, J. (Ed.), IoP Publishing, pp. 565-572.

 • Dimas, D.M. and Guedes Soares, C. (2004), “Numerical simulation of the transverse impact on different points of the span on a clamped beam” (In Portuguese), Proceedings of the Congress on the Computational Methods in Engineering (CMCE´04), 31 May-2 June, Lisbon, Portugal

 • Dimas, D.M. and Guedes Soares, C. (2004), “Experimental Study of the transverse impact on different points of the span of clamped beams with different lengths” (In Portuguese), Proceedings of the Congress on the Computational Methods in Engineering (CMCE´04), 31 May - 2 June, Lisbon, Portugal

 • Ferreira, B., Gordo, J.M. and Guedes Soares, C. (2004), “Collapse strength of non-reinforced tubular components” (In Portuguese), Proceedings of the Congress on the Computational Methods in Engineering (CMCE´04), 31 May-2 June, Lisbon, Portugal

 • Ferreira, B., Pasqualino, I.P., Estefan, S.F. and Guedes Soares, C. (2004), “Validation of a Numerical Model of the Collapse strength of Submarine Pipelines Subjected to External Pressures” (In Portuguese), Proceedings of the Congress on the Computational Methods in Engineering (CMCE´04) , 31 May-2 June, Lisbon, Portugal

 • Teixeira, A.P., Andreev, A. and Guedes Soares, C. (2004), “Stochastic analysis of the collapse strength of corroded plates” (In Portuguese), Proceedings of the Congress on the Computational Methods in Engineering (CMCE´04), 31 May-2 June, Lisbon, Portugal

 • Sutherland, L.S. and Guedes Soares, C. (2004), “Transverse Impact of Circular Marine Composite Plates”, Proceedings of the 5th National Meeting of Experimental Stress Analysis and Experimental Mechanics (APAET´04), 21-23 January, Coimbra, Portugal

 • Sutherland, L.S., Rodrigues, B. and Guedes Soares, C. (2004), “Design and commissioning of a frame with a hydraulic activator for structural testing” (In Portuguese), Proceedings of the Proceedings of the 5th National Meeting of Experimental Stress Analysis and Experimental Mechanics (APAET´04) (in Portuguese), 21-23 January, Coimbra, Portugal

 • Dimas, D.M. and Guedes Soares, C. (2004), “Energy Absorption and Rupture Analysis in Small-Scale Beams under Transverse Impact”, Proceedings of the 3rd International Conference on Collision and Grounding of Ships (ICCGS 2004), 25-27 October, Izu, Japan, pp. 312-321

 • Dimas, D.M. and Guedes Soares, C. (2004), “Energy Absorption and Rupture Analysis in Small-Scale Beams under Transverse Impact”, Proceedings of the 3rd International Conference on Collision and Grounding of Ships (ICCGS´04), 25-27 October, Izu, Japan, Vol. I, pp. 312-321

 • Dimas, D.M. and Guedes Soares, C. (2004), “Experimental Study of the transverse impact on different points of the span of clamped beams with different lengths” (In Portuguese), Proceedings of the Congress on the Computational Methods in Engineering (CMCE´04), 31 May - 2 June, Lisbon, Portugal.

 • Sutherland, L.S., Rodrigues, B. and Guedes Soares, C. (2004), “Design and commissioning of a portico with hydraulic actuator for structural testing" (In Portuguese), Proceedings of the Proceedings of the 5th National Meeting of Experimental Stress Analysis and Experimental Mechanics (APAET´04), (in Portuguese), 21-23 January, Coimbra, Portugal

 • Barradas Cardoso, J., Castro, J. e Valido, A.J. (2004), “Design Sensitivities of Thin-Walled Composite Beam Profiles”, Proceedings of the Congress on the Computational Methods in Engineering (CMCE´04), (in Portuguese), 31 May-2 June, Lisbon, Portugal

 • Varela, J.M., Santos, T.A. and Guedes Soares, C. (2004), “Visualization and Control of Ship Flooding Simulation in Virtual Environment” (In Portuguese), Proceedings of the Congresso de Métodos Computacionais em Engenharia (CMCE´04), 31 May-2 June, Lisbon, Portugal

 • Sutherland, L.S., Santos, F.M. and Guedes Soares, C. (2004), “Indentation of composites of ship application” (In Portuguese), Proceedings of the Proceedings of the 5th National Meeting of Experimental Stress Analysis and Experimental Mechanics (APAET´04), 21-23 January, Coimbra, Portugal

 • Dimas, D.M. and Guedes Soares, C. (2004), “Experimental and numerical study of clamped beams subjected to impact in the mid-span” (In Portuguese), Proceedings of the 5th National Meeting of Experimental Stress Analysis and Experimental Mechanics (APAET´04), (in Portuguese), 21-23 January, Coimbra, Portugal

 • Dimas, D.M. and Guedes Soares, C. (2004), “Experimental and numerical study of clamped beams subjected to impact in the mid-span”, Proceedings of the 5th National Meeting of Experimental Stress Analysis and Experimental Mechanics (APAET´04), (in Portuguese), 21-23 January, Coimbra, Portugal

 • Gordo, J.M. and Guedes Soares, C. (2005), “Compressive Tests on Stocky Panels with Different Configurations”, Proceedings of the ISOPE 2005, Seoul, South Korea, Paper No. 2005-TY-06, pp. 759-765

 • Garbatov, Y. and Guedes Soares, C. (2005), “Hot-Spot Stress Assessment of Longitudinaly Stiffened Dek Structure”, Proceedings of the Second International Congress on Mechanical and Electrical Engineering and Marine Industry (MEEMI´05), 7-9 October, Varna, Bulgaria, Vol. I, pp. 26-33

 • Barradas Cardoso, J. (2005), “Structural Design Sensitivity Analysis of Elastic-Plastic History-Dependent Response”, Proceedings of the Sixth World Congress of Structural and Multidisciplinary Optimization (WCSMO), Rio de Janeiro, Brazil

 • Valido, A.J. and Barradas Cardoso, J. (2005), “Design Sensitivity Analysis of Thin-walled Composite Beam Cross-Sections”, Proceedings of the Sixth World Congress of Structural and Multidisciplinary Optimization (WCSMO), Rio de Janeiro, Brazil

 • Garbatov, Y. and Guedes Soares, C. (2005), “Hot-Spot Stress Assessment of Longitudinaly Stiffened Dek Structure”, Proceedings of the Second International Congress on Mechanical and Electrical Engineering and Marine Industry (MEEMI´05), 7-9 October, Varna, Bulgaria, Vol. I, pp. 26-33

 • Garbatov, Y, Sutherland, L.S., Guedes Soares, C. and Cabral, G.P. (2005), “Structural Assessment of a Fishing Vessel Built of Glass Fiber Reinforced Polyester Resin”, Proceedings of the RINA Conference on Fishing Vessels, Fishing Technology and Fisheries, 13-14 April, Newcastle, U. K, pp. 89-98

 • Teixeira, A.P. and Guedes Soares, C. (2005), “Probabilistic modelling of the collapse behaviour of plates with random corrosion fields” (In Portuguese), Proceedings of the 2005 Conference on Numerical Methods in Engineering, 4-7 July, Granada, Spain, SEMNI

 • Gordo, J.M. and Guedes Soares, C. (2005), “Compressive Tests on Stocky Panels with Different Configurations”, Proceedings of the ISOPE 2005, Seul-South Corea, Paper No. 2005-TY-06, pp. 759-765

 • Luís, R.M., Witkowska, M. and Guedes Soares, C. (2006), “Ultimate Strength of Transverse Plate Assemblies Under Uniaxial Loads”, Proceedings of the 25th International Conference on Offshore Mechanics and Arctic Engineering (OMAE´06), 4-9 June, 2006, Hamburg, Germany, ASME, New York, Paper OMAE2006-92664

 • Luís, R.M. and Guedes Soares, C. (2006), “Ultimate Strength of Transverse Plate Assemblies Under Uniaxial Loads”, Proceedings of the III European Conference on Computational Mechanics Solids, Structures and Coupled Problems in Engineering (ECCM´06), C.A. Mota Soares et.al. (Eds.), 5-9 June, Lisbon-Portugal

 • Chen, N.-Z. and Guedes Soares, C. (2006), “Buckling Analysis of Stiffened Composite Panels”, Proceedings of theIII European Conference on Computational Mechanics Solids, Structures and Coupled Problems in Engineering (ECCM´06), C.A. Mota Soares et.al. (Eds.), 5-8 June, Lisbon, Portugal

 • Luís, R.M., Witkowska, M. and Guedes Soares, C. (2006), “Prediction of compressive strength of transverse panels with localized imperfections” (In Portuguese), Proceedings of the X Congress on Naval Architecture and Marine Engineering (JEN´06) (in Portuguese), 21-22 November, Instituto Superior Técnico, Lisbon, Portugal

 • Barreiros, A. and Barradas Cardoso, J. (2006), “The Solution of a Stochastic Programming Problem with Recourse Using a New Method”, Proceedings of the 48th Congress of the Operational Research Society, 11-13 September, Bath, U.K

 • Barreiros, A. and Barradas Cardoso, J. (2006), “Solution of Two-Stage Stochastic Linear Programming Problems”, Proceedings of the 12st Congresso de Investigaçăo Operacional (IO2006), 8-11 October, Lisbon, Portugal

 • Barreiros, A., Moita, P.P. e Barradas Cardoso, J. (2006), “Design Optimization of Mechanical Systems with Uncertain Input”, Proceedings of the 5th International Conference on Mechanics and Materials in Design, 24-26 July, Porto, Portugal

 • Benedito, N.M.B., Valido, A.J. and Barradas Cardoso, J. (2006), “Nonlinear Finite Element Analysis of Thin-Walled Laminated Beams Accounting Warping”, Proceedings of the 5th International Conference on Mechanics and Materials in Design, 24-26 July, Porto, Portugal

 • Moita, P.P., Valido, A.J. and Barradas Cardoso, J. (2006), “Minimum Time Design and Control of Mechanical Systems”, Proceedings of the 5th International Conference on Mechanics and Materials in Design, 24-26 July, Porto, Portugal

 • Luís, R.M. and Guedes Soares, C. (2006), “Assessment of a simplified method to calculate the longitudinal strength of damaged ships” (In Portuguese), ”, Proceedings of the X Congress on Naval Architecture and Marine Engineering (JEN´06), 21-22 November, Lisbon, Portugal

 • Luis, R.M., Hussein, A.W. and Guedes Soares, C. (2007), “On the Effect of Damage on the Longitudinal Strength of Ships”, Proceeding of the 10th International Symposium on Practical Design of Ships and Other Floating Structures (PRADS´07), 2007, Houston, Texas, United States of America, American Bureau of Shipping

 • Sutherland, L.S. and Guedes Soares, C. (2007), “Impact on Marine Laminates” , Proceeding of the International Conference "The Modern Yacht (RINA), The Royal Institution of Naval Architects, 11-12 October, Southampton, London, UK

 • Barradas Cardoso, J., Moita, P.P. and Valido, A.J. (2007), “Design and Control of Nonlinear Mechanical Systems for Minimum Time”, Proceedings of the International Conference on Engineering Dynamics (ICED´07), 17-19 April, Carvoeiro, Portugal

 • Barradas Cardoso, J., Moita, P.P. e Valido, A.J. (2007) , “Optimal Control of Injury Prevention Systems to Impact”, Proceedings of the Optimization 2007 Conference, Porto, Portugal

 • Moita, P.P., Barradas Cardoso, J. and Valido, A.J. (2007), , “A Space-Time Finite Element Model for Design and Control Optimization of Nonlinear Dynamic Response”, Proceedings of the International Conference on Engineering Dynamics (ICED´07), 17-19 April, Carvoeiro, Portugal

 • Sutherland, L.S. and Guedes Soares, C. (2007), “Impact on Marine Laminates”, Proceeding of the International Conference "The Modern Yacht (RINA), The Royal Institution of Naval Architects, 11-12 October, Southampton, UK

 • Luís, R.M., Witkowska, M. and Guedes Soares, C. (2007), “Collapse Behaviour of Damaged Panels with Dimple Imperfection”, Proceedings of the 26th International Conference on Offshore Mechanics and Arctic Engineering (OMAE´07), 10-15 June, 2007, San Diego, California, USA, ASME, New York, Paper OMAE2007-29777.

 • Hussein, A.W. and Guedes Soares, C. (2008), “Design Equation for the Ultimate Capacity of Intact and Grounded Double Hull Tankers Designed According to the Common Structural Rules”, Proceedings of the TEAM 2008, Ergin, A. (Editor), Istanbul, Turkey, Vol. 1, pp. 497-505

 • Gordo, J.M., “Strength of imperfection plate under axial compression” (In Portuguese), Proceedings of the SOBENA, Brazil

 • Gordo, J. M. and Guedes Soares, C. (2008), “Compressive Tests on Long Continuous Stiffened Panels”, Proceedings of the 27th International Conference on Offshore Mechanics and Arctic Engineering (OMAE´08), 15-20 June 2008, Estoril, Portugal, ASME, New York, Paper OMAE2008-57873

 • Witkowska, M. and Guedes Soares, C. (2008), “Collapse Strength of Stiffened Panels with Local Dent Damage”, Proceedings of the 27th International Conference on Offshore Mechanics and Arctic Engineering (OMAE´08), 15-20 June 2008, Estoril, Portugal, ASME, New York, Paper OMAE2008- 57950

 • Gordo, J.M. and Guedes Soares, C. (2008), “Compressive Tests on Long Continuous Stiffened Panels”, Proceedings of the 27th International Conference on Offshore Mechanics and Arctic Engineering (OMAE´08), 15-20 Junho, Estoril, Portugal, ASME, New York, USA, Paper OMAE2008-57873

 • Jiang, X. and Guedes Soares, C. (2008), “Nonlinear FEM analysis of pitted mild steel square plates subjected to In-plane compression”, Proceedings of the TEAM, Ergin, A. (Editor), Istanbul, Turkey

 • Cabos, C., Jaramillo, D., Stadie-Frohbös, G., Renard, P., Ventura, M. and Dumas, B. (2008), “Condition Assessment Scheme”, Proceedings of the 7th International Conference on Computer Applications and Information Technology in the Maritime Industries (Compit´08), 21-23 April, Bedford Hotel, Liege, Belgium

 • Varela, J.M., Ventura, M. and Guedes Soares, C. (2008), “Fast Ship Structures Modelling System for Hull Maintenance Support”, Proceedings of the Ship Repair Technology (SRT´08), 1-2. September, Newcastle – UK

 • Guedes Soares, C., Basu, R., Cerup Sinonsen, B., Egorov, G.V., Hung, C.F., Lindstrom, P., Samuelides, E., Vredeveldt, A. and Yoshikawa, T. (2009), “V.1 - Damage Assessment After Accidental Events”, Proceedings of the 17th International Ship and Offshore Structures Congress (ISSC), 16-21 August, 2009, Jang, C. D. and Hong, S. Y. (Eds.), Seoul National University, Vol. 2, pp. 1-72.

 • Hussein, A.W. and Guedes Soares, C. (2009), “Ultimate Strength of Intact and Damaged Bulk Carriers”, Proceedings of the 13th Congress of International Maritime Association of Mediterranean (IMAM´09), 12-15 October, Istanbul, Turkey

 • Villavicencio, R. and Guedes Soares, C. (2009), “Response of clamped beams to impact loading along their length”, Proceedings of the 13th Congress of International Maritime Association of the Mediterranean (IMAM´09), 12-15 October, Istanbul, Turkey

 • Oktem, A.S., Chaudhuri, R.A. and Guedes Soares, C. (2009), “A Higher Order Shear Deformation Theory based Fourier Solutions for Fully Clamped General Cross-ply Plates”, Proceeding of the 15th International Conference on Composite Structures (ICCS15), 14-17 June, Porto, Portugal

 • Paik, J.K., Branner, K., Choo, Y.S., Czujko, J., Fujikubo, M., Gordo, J.M., Parmentier, G., Laccarino, R., O´Neil, S., Pasqualino, I., Wang, D., Wang, X. and Zhang, S. (2009), “Committee III.1 - Ultimate Strength”, Proceedings of the 17th International Ship and Offshore Structures Congress (ISSC), 16-21 August, 2009, Jang, C. D. and Hong, S. Y. (Eds.), Seoul National University, Vol. 1, pp. 375-474

 • Karr, D., Rennan, D., Bronsart, R., Hambers, J., Chen, C.P., Chirica, I., McGregor, J., Oneto, F., Rigo, P., Takaoka, Y., Ventura, M. and Yum, J.S. (2009), “Committee IV.2 - Design Methods”, Proceedings of the 17th International Ship and Offshore Structures Congress (ISSC), 16-21 August, 2009, Jang, C. D. and Hong, S. Y. (Eds.), Seoul National University, Vol. 1, pp. 689-756

 • Shenoi, A., Beck, R., Boote, D., Davies, P., Hage, A., Hudson, D., Kageyama, K., Keuning, J.A., Miller, P. and Sutherland, L. (2009), “Committee V.8 - Sailing Yacht Design”, Proceedings of the 17th International Ship and Offshore Structures Congress (ISSC), 16-21 August, 2009, Jang, C. D. and Hong, S. Y. (Eds.), Seoul National University, Vol. 2, pp. 433-493

 • Jiang, X. and Guedes Soares, C. (2009), “Ultimate compressive capacity of mild steel playes with single and double side corrosion pits”, Proceedings of the TEAM 2009, 30 November-3 December, Kaohsiung, Taiwan

 • Valido, A.J., Cardoso, J.B. and Castro, J.A. (2009), “Optimal design of composite laminated thin-walled cross-sections”, Proceedings of the 8th World Congress on Structural and Multidisciplinary Optimization (WCSMO-8), 1-5 June, LNEC, Lisbon, Portugal

 • Moita, P.P., Cardoso, J.B. and Valido, A.J. (2009), “Optimal Control of Systems to Impact with Preview Control”, Proceedings of the 8th World Congress on Structural and Multidisciplinary Optimization (WCSMO-8), 1-5 June, LNEC, Lisbon, Portugal

 • Jiang, X. and Guedes Soares, C. (2010), “Ultimate Compressive Capacity of Rectangular Plates with Patia Depth Pits”, Proceedings of the 29th International Conference on Offshore Mechanics and Arctic Engineering (OMAE 2010), 6-11. June, Shanghai, China, ASME, New York

 • Cardoso, J.B., Moita, P.P. and Valido, A.J. (2010), “Multicriteria Oprimization of Injury Prevention Systems to Impact”, Proceedings of International Conference in Engineering Dynamics, 22–24 June, Ericeira, Portugal

 • Jiang, X. and Guedes Soares, C. (2010), “Ultimate capacity of mild steel plates with partial depth pits under biaxial compressive loads”, 11th International Symposium on Practical Design of Ships and Other Floating Structures, Rio de Janeiro, RJ, Brazil, pp. 1044-1052

 • Wang, G., Chen, N-Z., Guo, J. and Guedes Soares, C., (2010), “Application of Structural Reliability Approach to Assist Hull Integrity Management”, 11th International Symposium on Practical Design of Ships and Other Floating Structures, Rio de Janeiro, RJ, Brazil, pp. 1399-1410

 • Saad-Eldeen, S., Nguyen, T., Garbatov, Y. and Guedes Soares, C. (2010), “Fatigue Stress Assessment Accounting for Contact Effect”, Proceedings of the 10th International Conference on Marine Science and Technology, Union of Scientists of Varna, pp. 23-33

 • Chen, B.Q., Garbatov, Y. and Guedes Soares, C. (2010), “Displacement Measurement of the Box Girder Based on Photogrammetry”, Proceedings of the 11th International Symposium on Practical Design of Ships and Other Floating Structures (PRADS 2010), Rio de Janeiro, Brazil, pp. 1053-1061

 • Saad-Eldeen, S., Garbatov, Y. and Guedes Soares, C. (2010), “Experimental Assessment of the Ultimate Strength of a Box Girder Subjected to four-point Bending Moment”, 11th International Symposium on Practical Design of Ships and Other Floating Structures, Rio de Janeiro, RJ, Brazil, pp. 1134-1143

 • Machado, P., Cláudio, R.A., Valido, A.J., Duarte, R. and Martins, O. (2010), “Pre-Validation of Welded Joints in a Bike Frame”, Proceedings of Iberian Conference on Fracture and Structural Integrity 2010, 17-19 March, Porto, Portugal, pp. 133-138

 • Pan, J., Wu, W. and Xu, M.C., (2010), “The Design and Analysis of Pile Protection Devices for the Qiantang River Bridge”, Proceedings of the 29th International Conference on Offshore Mechanics and Arctic Engineering (OMAE 2010), 6-11. June, Shanghai, China, ASME, New York

 • Chen, B.Q., Garbatov, Y. and Guedes Soares, C. (2010), “Displacement Measurement of the Box Girder Based on Photogrammetry”, Proceedings of the 11th International Symposium on Practical Design of Ships and Other Floating Structures (PRADS 2010), Rio de Janeiro, Brazil, pp. 1053-1061

 • Villavicencio, R., Sutherland, L.S. and Guedes Soares, C. (2010), “Numerical simulation of transversely impacted, clamped circular aluminium plates”, Proceedings of the 5th International Conference on Collision and Grounding of Ships (ICCGS 2010), 14-16 June, Espoo, Finland

 • J. Barradas Cardoso, Aníbal J. Valido, Artur Barreiros , “Method to Improve the Calculation of the Bicriteria Pareto Frontier” , 2nd International Conference on Engineering Optimization, September 6 - 9, Lisbon, Portugal

 • Guedes Soares, C., Juncher Jensen, J., Incecik, A., Downes, J., Varsta, P., Gordo, J.M., Fricke, W., Vredeveldt, A., Jastrzebski, T., Hayman, B., Besnard, N., Codda, M., Das, P.K. and Garbatov, Y. (2011), “European Research in Marine Structures”, SNAME-The Society of Naval Architects &Marine Engineers, Hyatt Regency, Houston, TX, November 16-18

 • Xu, M.C. and Guedes Soares, C. (2011), “Comparison of Numerical Result with Experiments on the Ultimate Strength of Long Stiffened Panels”, Proceedings of the 30th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2011), 19-24 June, Rotterdam, The Netherlands, ASME, New York, USA, paper: OMAE2011-50294

 • Gordo, J.M., (2011), Transverse bending of stiffened panels induced by longitudinal stresses” (In Portuguese), Congresso de Métodos Numéricos em Engenharia, 14 a 17 June, Coimbra, Portugal

 • Gordo, J.M. (2011), “Effect of Initial Imperfections on the Strength of Restrained Plates”, Proceedings of the 30th International Conference on Ocean, Offshore and Arctic Engineering OMAE2011, June 19-24, 2011, Rotterdam, The Netherlands, OMAE2011-49161 pp. 123-133

 • Oktem, A.S., Alankaya, V. and Guedes Soares, C. (2011), “Bending Analysis of Functionally Graded Plates using a Higher Order Shear Deformation Theory”, Ankara International Aerospace Conference (AIAC), 14-16 September, Ankara Turkey

 • Silva, D., Martinho, P. and Guedes Soares, C. (2011), “Modelling Wave Energy in the Pilot Areas of Aguçadoura and São Pedro de Moel” (In Portuguese), Proceedings of “7as Jornadas Portuguesas de Engenharia Costeira e Portuária” (JPECP 2011), 6-7 October, Porto, Portugal

 • Chen, B.Q., Adak, M. and Guedes Soares, C. (2011), “Thermo-Mechanical Analysis of the Effects of Weld Parameters in Ship Plates During Welding Process”, ICSOT India 2011: Technological Innovation in Shipbuilding, 8-9 December, Kharagpur, India

 • Xu, M.C. and Guedes Soares, C., (2011), “Experimental Study on the Collapse Strength of Narrow Stiffened Panels”, Proceedings of the 30th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2011), 19-24 June, Rotterdam, The Netherlands, ASME, New York, USA, paper: OMAE2011-50293

 • Jiang, X. and Guedes Soares, C., (2011), “Ultimate capacity behaviour of pitted mild steel plates under biaxial compression”, Proceedings of the 3Proceedings of the 30th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2011), 19-24 June, Rotterdam, The Netherlands, ASME, New York, USA, paper: OMAE2011-49980

 • Chen, B.Q., Garbatov, Y. and Guedes Soares, C. (2011), “Automatic Approach for Measuring Deformations in Complex Structures Using Photogrammetry Technique”, Proceedings of the 22nd Pan American Conference of Naval Engineering, Maritime Transportation, Ports Engineering (COPINAVAL2011), September 27 - 30, Buenos Aires, Argentina

 • Chen, B.Q., Garbatov, Y. and Guedes Soares, C. (2011), “Automatic Approach for Measuring Deformations in Complex Structures Using Photogrammetry Technique”, Pan-American Congress in Naval Architecture, Maritime Transport and Engineering (COPINAVAL XXII), 27-30 September, Buenos Aires, Argentina

 • Chen, B.Q., Garbatov, Y. and Guedes Soares, C. (2011), “Automatic Approach for Measuring Deformations in Complex Structures Using Photogrammetry Technique”, Proceedings of the 22nd Pan American Conference of Naval Engineering, Maritime Transportation, Ports Engineering (COPINAVAL2011), September 27 - 30, Buenos Aires, Argentina

 • Moita, P.P., Barradas Cardoso, J. and Barreiros, A. (2011), “Optimal design and control of mechanical systems with uncertain input”, Proceeding of the International Conference on Structural Engineering Dynamics (ICEDyn 2011), 20-22 June, Tavira, Portugal

 • Liu, B., Villavicencio, R. and Guedes Soares, C. (2012), “Experimental and Numerical Plastic Response and Failure of Laterally Impacted Rectangular Plates”, Proceedings of the 31st International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2012), 1-6 Jul., Rio de Janeiro, Brazil.

 • Xu, M.C., Teixeira, A.P. and Guedes Soares, C. (2012), “Polynomial Based Response Surface Approach for Probabilistic Modelling of the Ultimate Strength of Stiffened Panels”, 20th Symposium on Theory and Practice of Shipbuilding (SORTA 2012), 27-29 September, Zagreb, Croatia

 • Villavicencio, R., Kim, Y-H., Cho, S-R. and Guedes Soares, C. (2012), “Numerical Investigation on the Plastic Response of a Small-Scale Laterally Impacted Tanker Double Hull Structure”, Proceedings of the 31st International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2012), 1-6 July, Rio de Janeiro, Brazil

 • Liu, B., Villavicencio, R. and Guedes Soares, C. (2012), “Experimental and Numerical Plastic Response and Failure of Laterally Impacted Rectangular Plates”, Proceedings of the 31st International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2012), 1-6 July, Rio de Janeiro, Brazil

 • Xu, M.C., Fujikubo, M. and Guedes Soares, C. (2012), “Influence of model geometry and boundary conditions on the ultimate strength of stiffened panels under uniaxial compressive loading”, Proceedings of the 31st International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2012), 1-6 July, Rio de Janeiro, Brazil

 • Xu, M.C. and Guedes Soares, C. (2012), “Ultimate strength of dented narrow stiffened panels subjected to compressive loads”, Proceedings of the 31st International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2012), 1-6 July, Rio de Janeiro, Brazil

 • Moita, P.P., Barradas Cardoso, J. and Valido, A.J. (2013), “Limiting performance analysis of a vehicle restraint system”, Proceedings of the International Conference on Structural Engineering Dynamics (ICEDyn 2013), 17-19 June, Sesimbra, Portugal

 • Jiang, X. and Guedes Soares, C. (2013), “Effect of Initial Distortions on the Ultimate Capacity of Pitting Corroded Plates”, Proceedings of the ASME 201332nd International Conference on Ocean, offshore and Arctic Engineering (OMAE2013), June 9-14, Nantes, France, pp: 10226

 • Liu, B., Villavicencio, R. and Guedes Soares, C. (2013), “Influence of striker shape on the crack initiation and propagation on laterally impacted thin aluminium plates”, Proceedings of the ASME 201332nd International Conference on Ocean, offshore and Arctic Engineering (OMAE2013), June 9-14, Nantes, France, pp. 11042

 • Liu, B., Villavicencio, R. and Guedes Soares, C. (2013), “Plastic response and failure prediction of stiffened plates punched by a wedge”, Proceedings of the ASME 2013 32nd International Conference on Ocean, offshore and Arctic Engineering (OMAE2013), June 9-14, Nantes, France, pp. 11043

 • Tekgoz, M., Garbatov, Y. and Guedes Soares, C. (2013), “Ultimate Strength Assessment of a Stiffened Plate Accounting for Welding Sequences”, 12th International Symposium on Practical Design of Ships and Other Floating Structures(PRADS 2013), 20-25 October, Changwon, Gyeongnam, Korea, pp. 1089-1095

 • Villavicencio, R., Liu, B. and Guedes Soares, C. (2013), “Response of a tanker side panel punched by a knife edge indenter”, International Conference on Collision and Grounding of Ships and Offshore Structures (ICCGS 2013), 17-19 June, Trondheim, Norway.

 • Valido, A.J. and Barradas Cardoso, J. (2013), “Optimal Geometry Laminated Thin-Walled Cross Sections”, Congress on Numerical Methods in Engineering, 25-28 June, Bilbao, Spain

 • Gordo, J.M. and Guedes Soares, C. (2014), “Experimental Evaluation of the Ultimate Bending Moment of a Thin Box Girder”, Proceedings of the 33rd International Conference on Ocean, Offshore and Arctic Engineering (OMAE2014), San Francisco, CA, USA, 8-13 June, Paper: OMAE2014-24645

 • Risso, G., Cau, C., Garbatov, Y. and Guedes Soares, C. (2015), “Fatigue strength analysis of longitudinal bulkheads of passenger ships with large openings”, 18th International Conference on Ships and Shipping Research (NAV 2015), 24-26 June, Milano, Italy, pp. 438-447

 • Garbatov, Y. and Guedes Soares, C. (2015), “Experimental Evaluation of Ageing Marine Structures”, 2015 World Maritime Technology Conference (WMTC 2015), 3-7 November, 2015, Providence, Rhode Island, New York, USA

 • Li, C.F., Ren, H.L., Zhu, Z.Y. and Guedes Soares, C. (2015), “FEM Analysis on ultimate strength of aluminium stiffended panels with fixed and floating transverse frames”, 34th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2015), 31 May-5 June, St. John’s, NL, Canada, paper: OMAE2015-41482

 • Garbatov, Y. and Guedes Soares, C. (2015), “Experimental Evaluation of Ageing Marine Structures”, 2015 World Maritime Technology Conference (WMTC 2015), 3-7 November, Providence, Rhode Island, New York, USA

 • Yeter, B., Garbatov, Y. and Guedes Soares, C. (2016), “Reliability of offshore wind turbine support structures subjected to extreme wave-induced loads and defects”, Proceedings of the 35th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2016), 19-24 June, Busan, South Korea

 • Kang, J.C., Sun, L.P. and Guedes Soares, C. (2016), “Fault tree analysis of the failure of floating offshore wind turbines support structures and blade systems”, Progress in Renewable Energies Offshore, Guedes Soares, C., (Ed.), Taylor & Francis Group, London, UK, pp. 741-749

 • Jiang , X. and Guedes Soares, C. (2016), “Residual strength of pitted mild steel plate subjected to biaxial compression”, Proceedings of the 35th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2016), 19-24 June, Busan, South Korea

 • Chen, BQ. and Guedes Soares, C. (2016), “Effect of welding sequence on the residual stress distribution in a stiffened plate”, Proceedings of the 35th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2016), 19-24 June, Busan, South Korea

 • Yeter, B., Garbatov, Y. and Guedes Soares, C. (2016), “Reliability of offshore wind turbine support structures subjected to extreme wave-induced loads and defects”, Proceedings of the 35th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2016), 19-24 June, Busan, South Korea

 • Liu, B. and Guedes Soares, C. (2016), “Influence of impact location on the plastic response and failure of rectangular cross-section tubes struck transversely by a hemispherical indenter”, Proceedings of the 35th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2016), 19-24 June, Busan, South Korea

 • Liu, B. and Guedes Soares, C. (2016), “Review of experimental work on energy absorption in ship structural components”, 7th International Conference on Collision and Grounding of Ships and Offshore Structures (ICCGS 2016), 15-18 June, Ulsan, Korea, pp. 157-164

 • Liu, B. and Guedes Soares, C. (2016), “Review of experimental work on energy absorption in ship structural components”, 7th International Conference on Collision and Grounding of Ships and Offshore Structures (ICCGS 2016), 15-18 June, Ulsan, Korea, pp. 157-164

 • Garbatov, Y. and Guedes Soares, C. (2017), “Spatial corrosion wastage modelling of steel plates subjected to marine environments”, Proceedings of the ASME 2016 36th International Conference on Ocean, Offshore and Arctic Engineering (OMAE17), 25-30 June, Trondheim, Norway

 • Li, C.F., Fu, P., Ren, H.L., Xu, W.J. and Guedes Soares, C. (2017), “Ultimate bearing capacity assessment of hull girder with Asymmetric cross-section”, Proceedings of the ASME 2016 36th International Conference on Ocean, Offshore and Arctic Engineering (OMAE17), 25-30 June, Trondheim, Norway

 • Yeter, B., Garbatov, Y. and Guedes Soares, C. (2017), “Risk-based multi-objective optimisation of a monopile offshore wind turbine support structure”, Proceedings of the ASME 2016 36th International Conference on Ocean, Offshore and Arctic Engineering (OMAE17), 25-30 June, Trondheim, Norway

 • Patel, SD. and Guedes Soares, C. (2017), “System Probability of Failure and Sensitivity Analyses of Composite Plates under Low Velocity Impact”, Composite Structures, Vol. 180, pp. 1022-1031

 • Yeter, B., Garbatov, Y., Guedes Soares, C., Punuai, W. and Azad, M.D.S. (2018), “Response of monopile offshore wind turbine structure subjected to seismic loads and degradation”, Proceedings of the 7th Asia Conference on Earthquake Engineering, 22-25 November, Bangkok, Thailand

 • Liu, B., Villavicencio, R., Liu, K., Zhu, L. and Guedes Soares, C. (2018), “Response of an aluminum stiffened plate under extreme slamming loadings”, Proceedings of the ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2018), 17-22 June, Madrid, Spain

 • Beites, N., Dias, M., Mendes, M.J.G.C., Carreira, F., Campos, F. and Calado, J.M.F. (2018), “A gantry robot automatic positioning system using computational vision”, Proceedings of the 1st Iberic Conference on Theoretical and Experimental Mechanics and Materials, 4-7 November, Porto, Portugal, pp. 1031-1042

 • Zhang, J., Liu, Q., Shi, X. and Guedes Soares, C. (2018), “Experimental study on the wave loads on monopile and jacket type support of offshore wind turbines” , Proceedings of the ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2018), 17-22 June, Madrid, Spain

 • Chen, B.Q. and Guedes Soares, C. (2018), “Numerical investigation on weld induced imperfections in aluminium ship plates”, Proceedings of the ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2018), 17-22 June, Madrid, Spain

 • Chen, B.Q., Hashemzadeh, M., Garbatov, Y. and Guedes Soares, C. (2018), “Recent developments in experimental and numerical assessments of welding-induced residual stresses”, Proceedings of the ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2018), 17-22 June, Madrid, Spain

 • Gordo, J. M. and Guedes Soares, C. (2018), “Pure bending test on a box girder with low panel's slenderness”, Arctic Engineering (OMAE 2018), 17-22 June, Madrid, Spain

 • Liu, B., Chen, L., Liao, XT., Zhu, L. and Guedes Soares, C. (2018), “Finite element analysis of a container ship struck by rigid and deformable bows”, Proceedings of the ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2018), 17-22 June, Madrid, Spain

 • Liu, B., Villavicencio, R., Liu, K., Zhu, L. and Guedes Soares, C. (2018), “Response of an aluminum stiffened plate under extreme slamming loadings”, Proceedings of the ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2018), 17-22 June, Madrid, Spain

 • Yeter, B., Garbatov, Y. and Guedes Soares, C. (2018), “Risk-based assessment of fixed offshore wind turbine support structures”, Proceedings of the ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2018), 17-22 June, Madrid, Spain

 • Yeter, B., Garbatov, Y. and Guedes Soares, C. (2018), “Strength assessment of jacket offshore wind turbine support structure accounting for rupture”, Proceedings of the ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2018), 17-22 June, Madrid, Spain

 • Zhang, J., Liu, Q., Shi, X. and Guedes Soares, C. (2018), “Experimental study on the wave loads on monopile and jacket type support of offshore wind turbines”, Proceedings of the ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2018), 17-22 June, Madrid, Spain

 • Zhang, J., Liu, Q., Shi, X. and Guedes Soares, C. (2018), “Experimental study on the wave loads on monopile and jacket type support of offshore wind turbines”, Arctic Engineering (OMAE 2018), 17-22 June, Madrid, Spain

 • Liu, B., Zhu, L. and Guedes Soares, C. (2019), “Numerical assessment of the crashworthiness of ship double-hull structures in grounding”, Third International Conference on Safety and Reliability of Ships, Offshore & Subsea Structures (SAROSS 2018), 23-24 May, Wuhan, China

 • Liu, B., Zhu, L. and Guedes Soares, C. (2019), “Numerical assessment of the crashworthiness of ship double-hull structures in grounding”, Third International Conference on Safety and Reliability of Ships, Offshore & Subsea Structures (SAROSS 2018), 23-24 May, Wuhan, China

 • Chichi, D. and Garbatov, Y. (2019), “Retrofitting Analysis of Tanker Ship Hull Structure Subjected to Corrosion”, Brodogradnja, Vol. 70(2), pp. 87-109



For information about all CENTEC publications you can download: Download the Complete List of CENTEC Publications