|
|
Publicações
Wang, Yi., Wu, W., Wang, S. and Guedes Soares, C. (2020), “Slam-induced loads of a three-dimensional bow with various pitch angles”, Journal of Offshore Mechanics and Arctic Engineering, Vol. 142, pp. 014502-1 - 014502-7
A 3D water entry of a typical bow model of River-to-Sea ship is studied experimentally. A large number of systematic experiments have been performed for the bow model with different pitch angles. Considering various pitch angles and impact velocities in the model tests, the slamming pressure distributions on the bottom of the bow are presented and discussed. The measured slamming pressures on the bow are identified in terms of the maximum slamming coefficient. The effects of the pitch angle and impact velocity on slamming pressure are discussed as well, based on the experimental measurements. It is shown that the slamming load on the bottom of the model increases as the pitch angle decrease except the case with a zero angle due to the air cushion effects. With a higher impact velocity, the coefficient of the maximum slamming pressure is smaller for most of the tested cases.
Se nao conseguiu obter uma copia desta publicação: Peça uma cópia desta publicação
Para informação sobre todas as publicações do CENTEC pode descarregar: Lista Completa de Publicações do CENTEC
|