Publicações

Chen, B.Q., Hashemzadeh, M. e Guedes Soares, C. (2018), “Validation of numerical simulations with X-ray diffraction measurements of residual stress in butt-welded steel plates”, Ships & Offshore Structures, Vol. 13(3), pp. 273-282

The present work investigates experimentally and numerically the residual stress induced in the surface of thin steel plates subjected to single pass butt welding. First, the temperature history is calculated considering the temperature dependent material properties in thermal analysis and some selected points are verified by measured temperature history recorded by thermocouple and data logger. Then the mechanical analysis of indirect thermo-mechanical analysis in numerical run is applied to calculate the induced residual stress of welding. The numerical results are validated with the experimental measurements. The experimental data, collected in the fusion zone, heat affected zone, and at the edges of the transverse edges of the plate are measured by the technique of X-ray diffraction. In addition, the effect of the boundary conditions, element size and the width of the plate are also investigated and discussed and conclusions are presented.

Pode descarregar esta publicacao de: http://www.tandfonline.com/doi/full/10.1080/17445302.2017.1368122

Se nao conseguiu obter uma copia desta publicação: Peça uma cópia desta publicação



Para informação sobre todas as publicações do CENTEC pode descarregar: Lista Completa de Publicações do CENTEC