Publicações

Chen, B.Q., Hashemzadeh, M. e Guedes Soares, C. (2014), “Numerical and experimental studies on temperature and distortion patterns in butt-welded plates”, Int. Journal Advanced Manufacturing Technology, Vol. 72, pp. 1121-1131

A computationally efficient solution is adopted for three dimensional transient analysis of thermal response due to single-pass gas tungsten arc welding. The time-variant thermal and mechanical properties of the steel material have been considered. Experiments of butt welding process have been performed. The temperature distribution of the plate calculated by the numerical approach turned out to have a good agreement with the experimental results. The effect of the Element Birth-Death technique has been discussed in detail, considering the double ellipsoidal moving heat source. The magnitude of peak temperature in the plates is found 8.76% higher when taking into account the Element Birth-Death effect. The effects of finite element mesh size and convection coefficient on the simulation result have been discussed. The convection coefficient has a very low effect on the maximum temperature but is critical to the temperature gradient in the cooling stage. The structural response of welded plates including the residual stress and deformation has also been studied. The numerical results generally agree well with the experimental measurements.

Pode descarregar esta publicacao de: http://link.springer.com/article/10.1007/s00170-014-5740-8

Se nao conseguiu obter uma copia desta publicação: Peça uma cópia desta publicação



Para informação sobre todas as publicações do CENTEC pode descarregar: Lista Completa de Publicações do CENTEC