Publicações

Villavicencio, R., Sutherland, L.S. e Guedes Soares, C. (2012), “Numerical simulation of transversely impacted, clamped circular aluminium plates”, Ships and Offshore Structures, Vol. 7(1), pp. 31-45

In this paper experimental and numerical results of a series of drop weight impact tests examining the dynamic response of fully clamped aluminium 5083/H111 circular plates struck transversely at the centre by a mass with a spherical indenter are presented. The impact velocity varied from 1.0 to 6.0 m/s. The plates showed no visible damage at the very lowest incident energies, but suffered both indentation damage and plastic deformation as incident energy was increased. The numerical modelling was performed using the LS-DYNA non-linear, dynamic finite element software. Both shell and solid element models of progressively refined mesh sizes were used and the results compared with the experimental data. The numerical calculations used can accurately predict the response of deflections, forces and absorbed energies, even for the models with coarse meshes. However, finer meshes and solid elements were required to obtain a satisfactorily accurate prediction of the deformed shape.

Pode descarregar esta publicacao de: http://www.tandfonline.com/doi/abs/10.1080/17445302.2010.548122#preview

Se nao conseguiu obter uma copia desta publicação: Peça uma cópia desta publicação



Para informação sobre todas as publicações do CENTEC pode descarregar: Lista Completa de Publicações do CENTEC