Grupo de Estruturas Navais > 3.5 Modelação Geométrica de Estruturas Navais > Publicações

Artigos em Revistas
 • Ventura, M., Rodrigues, C. e Guedes Soares, C. (1996), “Development of a System for Computer-Aided Design of Ship Hulls” (In Portuguese), Ingenieria Naval, Issue 732, pp.52-60

 • Ventura, M. e Guedes Soares, C. (2001), “Application of NURBS curves and surfaces to hull form modelling" (In Portuguese), Ingenium, Vol. 28, Issue 2, pp. 73-79

 • Vitória, J. e Guedes Soares, C. (2005), “A Method for Automatic Nesting of Ship Plates”, Journal of Ship Production, Vol. 21, Issue 1, pp. 14-27.

 • Rodrigues Branco, J.N. e Guedes Soares, C. (2005), “Mapping of Shell Plates of Double Curvature into Plane Surfaces”, Journal of Ship Production, Vol. 21, nº4, pp. 248-257

 • Oliveira, A., Fonseca, N. e Guedes Soares, C. (2006) , “Design of a Modern Purse Seiner Fishing Vessel for the Portuguese Costal Sea”, International Journal of Small Craft Technology (RINA Transactions), Vol. 148, Part B1, pp. 11-24

 • Ventura, M. e Guedes Soares, C. (2007), “Application of STEP Technology to Ship Repair Data Management”, Journal of Ship Production, Vol. 23, Issue 4, pp. 231-237

 • Varela, J.M., Ventura, M. e Guedes Soares, C. (2011), “Product Data Model of Hull Structures and Digital Prototyping System for Basic Structural Design”, Ships and Offshore Structures, Vol. 6, Issue 1-2, pp. 3-14

 • Ventura, M. e Guedes Soares, C. (2012), “Surface Intersection in Geometric Modeling of Ships’ Hulls”, Journal of Marine science and Technology, Vol. 17, pp. 114-124

 • Datta, R. e Guedes Soares, C. (2012), "NURBS based scheme for automatic quadrilateral mesh generation for FE and BEM analysis", Marine Systems & Ocean Technology, Vol. 7(1), pp. 29-35

 • Ventura, M. e Guedes Soares, C. (2013), “Modelling Stiffeners of Ship Hull Structures”, Journal of Engineering for the Maritime Environment, Vol. 227, Issue 2, pp. 155-166

 • Varela, J.M. e Guedes Soares, C. (2015), “Software Architecture of an Interface for three-dimensional Collision Handling in Maritime Virtual Environments”, Simulation: Transactions of the Society for Modeling and Simulation International, Vol. 9(8), pp. 735-749

 • Ventura, M. e Guedes Soares, C. (2016), “Modelling stiffened plate panels in computer aided ship design”, Journal of Engineering for the Maritime Environment, Vol. 230(1), pp. 55-66

 • Varela, J.M. e Guedes Soares, C. (2017), “Geometry and visual realism of ship models for digital ship bridge simulators”, Journal of Engineering for the Maritime Environment, Vol. 231(1), pp. 329-341

 • Jafaryeganeh, H., Ventura, M. and Guedes Soares, C. (2019), "Multi-objective optimization of internal compartment layout of oil tankers", Journal of Ship Production and Design, Vol. 35(4), pp. 374-385

 • Jafaryeganeh, H., Ventura, M. and Guedes Soares, C. (2020), “Application of multi-criteria decision making methods for selection of ship internal layout design from a Pareto optimal set", Ocean Engineering, Vol. 202, pp. 107151-1 - 107151-14

 • Jafaryeganeh, H. and Guedes Soares, C. (2020), “A technique of panels cutting for modification of hull geometry hydrodynamic models”, International Journal of Maritime Engineering, Vol. 162(Part A2), pp. A219 - A230

 • Jafaryeganeh, H., Ventura, M. and Guedes Soares, C. (2020), “Robust-based optimization of the hull internal layout of oil tanker”, Ocean Engineering, Vol. 216, pp. 107846 (14 pages)

 • Jafaryeganeh, H., Ventura, M. and Guedes Soares, C. (2020), “Effect of normalization techniques in multi-criteria decision making methods for the design of ship internal layout from a Pareto optimal set”, Structural and Multidisciplinary Optimization, Vo. 62, pp. 1849-1863

 • Jafaryeganeh, H., Ventura, M. and Guedes Soares, C. (2020), “Robust-based optimization of the hull internal layout of oil tanker”, Ocean Engineering, Vol. 216, 107846 (14 pages)



Artigos em Livros
 • Rodrigues, C., Lima, F.S., Ventura, M. e Guedes Soares, C. (1995), “The CADESNAV/-PC System for support to Ships’ Design and Production” (In Portuguese) , A Construção Naval no Passado e no Presente, A Engenharia Naval em Portugal, Vol X, C. Guedes Soares (Ed.), Lisboa, pp. 10-1 - 10-13

 • Vitória, J., Ventura, M. e Guedes Soares, C. (1995) , “Ships’ Shape System Representation” (In Portuguese), A Construção Naval no Passado e no Presente, A Engenharia Naval em Portugal, Vol X, C. Guedes Soares (Ed.), Lisboa, pp. 11-1 - 11-12

 • Torrado, T., Coelho, J.J., Pilar, A.P., Ventura, M. and Guedes Soares, C. (1995), “Ships’ Structure System Representation” (In Portuguese), A Construção Naval no Passado e no Presente, A Engenharia Naval em Portugal, Vol X, C. Guedes Soares (Ed.), Lisboa, pp. 12-1 - 12-22

 • Ventura, M., Gordo, J.M. e Guedes Soares, C. (1995), “Computer-Aided Ship Structural Design” (In Portuguese), A Construção Naval no Passado e no Presente, A Engenharia Naval em Portugal, Vol X, C. Guedes Soares (Ed.), Lisboa, pp. 13-1 - 13-14

 • Blot, J.Y., Ruiz, P., Ventura, M. e Guedes Soares, C. (1995), “Application of Automatic Methods to the Study of Ancient Hulls” (In Portuguese), Shipbuilding in the Past and Present, Naval Architecture and Marine Engineering in Portugal (in Portuguese), Vol. X, Guedes Soares, C. (Ed.), Lisbon, pp. 5.1-5.36

 • Ventura, M., Rodrigues, C. e Guedes Soares, C. (1995), “Development of a System for Computer-Aided Design of Ship Hulls” (In Portuguese), Marine Technology and Transportation, T. Graczyk, I. Jastrzebski, C. A. Brebbia and R. Burns (Eds.), Computational Mechanics Publications, Southampton, pgs. 287-294

 • Ventura, M. e Guedes Soares, C. (1998), “Hull Form Modelling Using NURBS Curves and Surfaces” (In Portuguese), Practical Design of Ships and Mobile Units, Oosterveld, M.W.C. and Tan, S.G. (Eds.), Elsevier Science, The Hague, pp. 289-296

 • Ventura, M., Victoria, J. e Guedes Soares, C. (1999), “Ship Hull Product Model”, Application of Information Technologies to the Maritime Industries, C. Guedes Soares and J. Brodda (Eds.), Edições Salamandra, Ltd., Lisbon, pp. 147-162

 • Cacho, A.J. e Guedes Soares, C. (2000), “A Plate Development Method Based in Geodesics” (In Portuguese), O Mar e os Desafios do Futuro, C. Guedes Soares e J. Beirão Reis (Eds.), Edições Salamandra, Lda, Lisboa, pp. 411-430

 • Ventura, M., Victória, J. e Guedes Soares, C. (2000) , “Integration of STEP Technology in a Ship Product Data Modelling System” (In Portuguese), O Mar e os Desafios do Futuro, C. Guedes Soares e J. Beirão Reis (Eds.), Edições Salamandra, Lda, Lisboa, pp. 387-409

 • Vitória, J., Bernardo, J. e Guedes Soares, C. (2000), “System of Plates Nesting for the Maritime Industry” (In Portuguese), O Mar e os Desafios do Futuro, C. Guedes Soares e J. Beirão Reis (Eds.), Edições Salamandra, Lda, Lisboa, pp. 431-448

 • Varela, J.M. e Guedes Soares, C. (2002), “Virtual Visualization and Propagation Control of Ship Fluids” (In Portuguese), O Mar Fonte de Desenvolvimento Sustentado, C. Guedes Soares, J. Beirão Reis e M. B. Martins Guerreiro (Eds.), Edições Salamandra, pp.477-490

 • Ferraris, S., Fonseca, N., Hayman, B., Hughes, O., Thiberge, E., Toyama, Y., Vredeveldt, A. e Yang, P. (2003), “Structural Design of High Speed Vehicles”, Ship and Offshore Structures Congress (ISSC 2003), 11-15 Agosto, San Diego, USA, Vol. 2, Committee V.4, pp. 109-147

 • Pradillon, J.-Y., Beach, J., Bohlmann, B., Boote, D., Hage, A., Janssen, G., Kada, K., Lee, S.-G., Li, X., Ventura, M., Wu, C.-C. e Zanic, V. (2003), “Design Methods”, Ship and Offshore Structures Congress (ISSC 2003), Elsevier, 11-15 Agosto, San Diego, USA, Vol. 1, Committee IV.2, pp. 447-509

 • Varela, J.M. e Guedes Soares, C. (2004), “Virtual ship support model to avoid ship failure” (In Portuguese), As Actividades Marítimas e a Engenharia, Guedes Soares, C. e Gonçalves de Brito, V. (Eds), Edições Salamandra, Lda., Lisboa, Portugal, pp. 713-725

 • Varela, J.M. e Guedes Soares, C. (2005), “Survey of Techniques for Real-Time Visualization of the Ocean Surface”, Maritime Transportation and Exploitation of Ocean and Coastal Resources, Guedes Soares, C., Garbatov, Y. e Fonseca, N. (Eds.), Francis & Taylor Group, London, UK, Vol. 2, pp. 1167-1174

 • Hage, A., Boote, D., Bronsart, R., Chen, Q., Kada, K., Karr, D., McVee, J.D., Ulfvarson, A., Ventura, M., Wu, C-C., Yang, V. e Zhang, S.-K. (2006), “Design Methods”, Ship and Offshore Structures Congress (ISSC 2006), Frize, P. A. e Shenoi, R. A. (Eds.), 20-25 Agosto, Southampton, UK, Vol. 1, Committee IV.2, pp. 609-686

 • Varela, J.M. e Guedes Soares, C. (2006), “Real time visualization of the sea surface by using directional wave spectra” (In Portuguese), Inovação e Desenvolvimento nas Actividades Marítimas (X Jornadas de Engenharia Naval), 21-22 Novembro, Lisboa – Portugal

 • Cabos, C., Jaramillo, D., Stadie-Frohbös, G., Renard, P., Ventura, M. e Dumas, B. (2008), “Condition Assessment Scheme”, Proceedings of the 7th International Conference on Computer Applications and Information Technology in the Maritime Industries (Compit´08), 21-23 April, Bedford Hotel, Liege, Belgium

 • Varela, J.M., Ventura, M. e Guedes Soares, C. (2008), “Fast Ship Structures Modelling System for Hull Maintenance Support”, Proceedings of the Ship Repair Technology (SRT´08), 1-2. September, Newcastle – UK

 • Varela, J.M., e Ventura, M. (2008), “Generation of triangular mesh representing ship hulls with NURBS surfaces” (In Portuguese), O Sector Marítimo Português, Guedes Soares, C. e Costa Monteiro, C. (Eds.), Edições Salamandra, Lda., Lisboa

 • Varela, J.M., Ventura, M., e Guedes Soares, C. (2009), ”Digital prototyping of hull structures in basic design”, Analysis and Design of Marine Structures, Guedes Soares, C. and Das, P. K. (Eds.), Taylor & Francis Group, London, U.K., pp. 457-465.

 • Ventura, M. e Guedes Soares, C. (2011), “Geometric Modelling and Product Data Management in Ship Design”, Marine Technology and Engineering, C. Guedes Soares, Y. Garbatov, N. Fonseca, A.P. Teixeira (Eds.), Taylor & Francis Group, London, UK, pp. 1019-1044

 • Colette, M., Bronsart, R., Chen, Y., Erikstad, S.O., Georgiev, P., Giuglea, V., Jeong, H.K., Lazakis, I., Moro, L., Sekulski, Z., Sicchiero, M., Toyoda, M., Ventura, M. e Zanic, V. (2015), “Design Methods”, 19th International Ship and Offshore Structures Congress (ISSC 2015), Methods”, C. Guedes Soares & Y. Garbatov, (Eds.), Elsevier, pp. 459-518

 • Varela, J. M. e Guedes Soares, C. (2015), “Geometric modelling of ships for real-time 3D ship simulators”, Maritime Technology and Engineering, Guedes Soares, C. & Santos T.A. (Eds.), Taylor & Francis Group, London, UK, pp. 341-352

 • Jafaryeganeh, H., Ventura, M. e Guedes Soares, C. (2016), “Parametric modelling for adaptive internal compartment design of container ships”, Maritime Technology and Engineering 3, Guedes Soares, C. & Santos T. A., (Eds.), Taylor & Francis Group, London, UK, pp. 655-661

 • Soares de Melo, D. e Garbatov, Y. (2016), “Yacht mast and rigging system software for design and analysis”, Maritime Technology and Engineering 3, Guedes Soares, C. & Santos T. A., (Eds.), Taylor & Francis Group, London, UK, pp. 683-691

 • Uzunoglu, E. e Guedes Soares, C. (2016), “A numerical model for compartment assessment of offshore structures with cylindrical hulls”, Maritime Technology and Engineering 3, Guedes Soares, C. & Santos T. A., (Eds.), Taylor & Francis Group, London, UK, pp. 693-700

 • Jafaryeganeh, H., Ventura, M. e Guedes Soares, C. (2018), “Parametric modelling of tanker internal compartment layout for survivability improvement within the framework of regulations”, Maritime Transportation and Harvesting of Sea Resources, Guedes Soares, C. & Teixeira A.P. (Eds.), Taylor & Francis Group, London, UK, pp. 23-30

 • Sisci, F. e Ventura, M. (2018), “Tool for initial hull structure dimensioning at ship concept”, Guedes Soares, C. & Santos T.A., (Eds.), Progress in Maritime Technology and Engineering, Taylor & Francis Group, London, UK, pp. 309-316

 • Lazakis, I., Bronsart, R., Caparace, J-D., Chen, Y., Georgiev, P., Ilnitskiy, I., Moro, L., Prebeg, P., Mendonça Santos, J., Sekulski, Z., Sicchiero, M., Sielski, R., Tang, W., Toyoda, M. and Varela, J. (2018), “Committee IV.2 - Design Methods”, 20th International Ship and Offshore Structures Congress (ISSC 2018), Kaminski, M. & Rigo P. (Eds.), IOS Press Ebooks, pp. Vol 1 - 609-708 and Vol 3 - 131-158.

 • Lazakis, I., Bronsart, R., Caparace, J-D., Chen, Y., Georgiev, P., Ilnitskiy, I., Moro, L., Prebeg, P., Mendonça Santos, J., Sekulski, Z., Sicchiero, M., Sielski, R., Tang, W., Toyoda, M. and Varela, J. (2018), “Committee IV.2 - Design Methods”, 20th International Ship and Offshore Structures Congress (ISSC 2018), Kaminski, M. & Rigo P. (Eds.), IOS Press Ebooks, pp. Vol 1 - 609-708 and Vol 3 - 131-158.

 • Truelock, D., Czaban, Z., Luo, H., Wang, X., Holtmann, M., Begovic, E., Yasuda, A., Ventura, M., Nicholls-Ee, R., Oterkus, E. and Sensharma, P. (2018), “Committee V.5 - Special Craft”, 20th International Ship and Offshore Structures Congress (ISSC 2018), Kaminski, M. & Rigo P. (Eds.), IOS Press Ebooks, pp. Vol 2 - 279-345 and Vol 3 - 231-245.

 • Truelock, D., Czaban, Z., Luo, H., Wang, X., Holtmann, M., Begovic, E., Yasuda, A., Ventura, M., Nicholls-Ee, R., Oterkus, E. and Sensharma, P. (2018), “Committee V.5 - Special Craft”, 20th International Ship and Offshore Structures Congress (ISSC 2018), Kaminski, M. & Rigo P. (Eds.), IOS Press Ebooks, pp. Vol 2 - 279-345 and Vol 3 - 231-245.



Artigos em Conferências
 • Ventura, M., Cacho, A., Torrado, T. e Guedes Soares, C. (1995), “Computer-Aided Generation of Ship Hull Structures on Small Computers”, Proceedings International Symposium Computer-Aided Design & Production for Small Craft, Southampton, Setembro, nº 12, pp. 1-8

 • Ventura, M. e Guedes Soares, C. (1998), “Hull Form Modelling Using NURBS Curves and Surfaces” (In Portuguese), Ship Design, Shipbuilding and Ship Maintenance, David e Silva, F. and Rodrigues Mateus, A. (Eds.), Lisboa, pp. 14.1-14.15

 • Ventura, M., Vitória, J. e Guedes Soares, C., (2000), “Implementation of STEP Translators Using the Ship Hull Product Model”, 1st International EuroConference on Computer Applications and Information Technology in the Maritime Industries (COMPIT’2000), Potsdam, 29 March –2 April, pp. 463-476

 • Wieland, P., Odendahl, C., Weitzenböck, E., Jaramillo, D., Makris, S., Cacho, A. e Guedes Soares, C. (2000), “Process and Data Modelling for a Maritime Virtual Enterprise”, 1st International EuroConference on Computer Applications and Information Technology in the Maritime Industries (COMPIT’2000), Potsdam, 29 March –2 April, pp. 323-336

 • Sun, H.-H. e Guedes Soares, C. (2001), “Reliability-Based Structural Design of Ship-Type FPSO Units”, Proceedings of the 20th International Conference on Offshore Mechanics and Arctic Engineering (OMAE’01), 3-8 June, 2001, Rio de Janeiro, Brasil, ASME, New York, Paper OMAE2001-S&R-2177

 • Ventura, M. e Guedes Soares, C. (2002), “Exchange and Sharing of Ship Product Data”, Proceedings of the WEGEMT, 11-15 Novembro, Madrid, Espanha

 • Monev, V., Santos, T.A., Ventura, M. e Guedes Soares, C. (2002), “Automatic Generation of the Geometric Definitions of Ship Subdivision for Damage Stability Optimisation”, Proceedings of the 6th International Conference on Marine Science and Technology (Black Sea´02), 10-12 Outubro, Varna, Bulgaria

 • Varela, J.M. e Guedes Soares, C. (2002), “An Object Oriented Architecture of a Fluid Dissemination Virtual Environment in a Ship”, Actas do SIM OUEST 2002, 28-29 Novembro, Nantes, France

 • Varela, J., Santos, T.A. e Guedes Soares, C. (2003), “Simulation of Fluid Dissemination in a Virtual Reality Environment Onboard the Ship”, Proceedings of the 2nd International Conference on Computer Applications and Information Technology in the Maritime Industries (COMPIT'03), 14-17 Maio, Hamburgo, Alemanha, pp. 432-443

 • Varela, J.M., Santos, T.A. e Guedes Soares, C. (2004), “Visualization and Control of Ship Flooding Simulation in Virtual Environment” (In Portuguese), Proceedings of the Congresso de Métodos Computacionais em Engenharia (CMCE´04), 31 May-2 June, Lisbon, Portugal

 • Oliveira, A., Fonseca, N. e Guedes Soares, C. (2005) , “Design of a Modern Purse Seiner Fishing Vessel for the Portuguese Costal Sea”, Actas da RINA Conference on Fishing Vessels, Fishing Technology and Fisheries, 13-14 Abril, Newcastle, UK

 • Karr, D., Rennan, D., Bronsart, R., Hambers, J., Chen, C.P., Chirica, I., McGregor, J., Oneto, F., Rigo, P., Takaoka, Y., Ventura, M. e Yum, J.S. (2009), “Committee IV.2 - Design Methods”, Proceedings of the 17th International Ship and Offshore Structures Congress (ISSC), 16-21 August, Jang, C. D. and Hong, S. Y. (Eds.), Seoul National University, Vol. 1, pp. 689-756

 • Datta, R. e Guedes Soares, C. (2010), “NURBS Based Scheme for Automatic Quadrilateral Mesh Generation for FE and BIEM Analysis”, Proceedings of the 11th International Symposium on Practical Design of Ships and Other Floating Structures (PRADS 2010), 19-24 Setembro, Rio de Janeiro, Brasil, pp. 815-822

 • Datta, R. and Guedes Soares, C. (2010), “NURBS Based Scheme for Automatic Quadrilateral Mesh Generation for FE and BIEM Analysis”, 11th International Symposium on Practical Design of Ships and Other Floating Structures, Rio de Janeiro, RJ, Brazil, pp. 815-822



Para informação sobre todas as publicações do CENTEC pode descarregar: Lista Completa de Publicações do CENTEC